ICP Electronics Australia Presents ICP DAS’s MDC-714 iModbus data concentrator with 1 x Ethernet, 1 x RS-232, and 4 x RS-485 comprised of non-isolated and isolated ports
ICP Australia is proud to introduce ICP DAS’s MDC-700 series which is a Modbus Data Concentrator that can perform up to 250 Modbus/RTU commands and can also read/write from/to Modbus slave devices via RS-232/485 and allows up to 8 Modbus/TCP masters to get the polled data via the Ethernet. MDC-700 series provides a built-in webserver to ease the configuring and provide clear information for the performed results of each Modbus/RTU command on the RS-232/485.
The MDC performs pre-defined Modbus/RTU commands to read/write data from/to the Modbus/ RTU slave devices via the RS-232/485. It mirrors the data of the slave devices to its own shared memory. And it accepts up to 8 Modbus/TCP masters to directly read/write data from/to the shared memory instead of polling each Modbus/RTU slave device one by one. This way not only does it make the data on the RS-232/485 sharable to multiple Modbus/TCP master but also shortens the time to read/write data from/to multiple Modbus/RTU slave devices.
The MDC can perform up to 250 polling definitions. And the internal shared memory has four tables to store the polled AI, AO, DI, and DO data. Each table can store up to 9600 registers.
- Supports Modbus Master/Slave on the Serial Port and Modbus TCP Slave on the Ethernet Interface
- Supports up to 8 Simultaneous Modbus TCP Connections at One Time
- Data Pool for up to 9600 Registers
- Modbus Polling Commands for up to 250 Definitions
- Easy Configuration with a Simple CSV File for Quick Start-Up
- HTML5 Web-Based User Interface