EAZY-CAL LVC-4000 LVDT/RVDT Signal Conditioner from Bestech Australia

Standalone signal conditioner with selectable voltage or 4-20mA analogue and RS485 digital outputs

Category: Tag:


The EAZY-CAL™ LVC-4000 LVDT/RVDT Signal Conditioner is a stonadalone signal conditioner with selectable voltage or 4-20mA analogue and RS485 digital outputs, supporting a wide range of AC LVDTs, RVDTs, and VR   bridges with output non-linearity 鈮ぢ0.1% FS. The EAZY-CAL™
LVC4000 simplifies calibration setup with 2 pushbutton front panel controls to set up ZERO and Full Scale (FS), bringing machinery downtime to a minimum. 4 LED status indicators guide operators through the calibration process and provide feedback to ensure the integrity of the calibration (blinking LED codes). 

The LVC 4000 signal conditioner digitally communicates with up to 16 devices simultaneously via a daisy chain connection in master/ slave configuration for multiple channel applications (One unit will assume the Master function based on DIP switch priority setting. If a fault should occur, the next highest priority unit will take over as Master), and it operates from a 9-30V DC power supply and is housed in a polyamide DIN rail mounted enclosure. 

LVC-4000 signal conditioners can be located remotely up to 30+ meters to facilitate LVDT operation in extreme environment:

  • Push-button or RS-485 command auto-calibration
  • Analog voltage or current loop output
  • Digital RS-485 interface
  • Supports all standard AC LVDTs, RVDTs, and VR half-bridge sensors
  • Master/slave excitation synchronization
  • DIN-rail mountable
  • Colour-coded terminal blocks
© All Rights Reserved. All content published on this site is the property of Prime Creative Media. Unauthorised reproduction is prohibited