Differential Pressure Sensors by Dwyer Instruments

Differential Pressure Sensors by Dwyer Instruments

Category: Tag:

Description

Dwyer extensive range is functional and specified to many industries. The range includes:

  • The Series
    DX
    is a differential pressure switch that makes a contact output based
    on the differential between two pressure sources. Wetted materials of brass and
    flouroelastomer are suitable for use with most gases and water based solutions.
    The switch can be used for low differential pressure indication with set point
    on a decrease of pressure as low as 1 psid (0.07 bar). Differential set point
    ranges are available from 2.5 to 75 psid (0.17 to 5.17 bar) on increasing
    differential pressure and 1.0 to 67 psid (0.07 to 4.62 bar) on decreasing differential
    pressure. Unit features a high static pressure rating of 200 psig (13.8 bar).
    Weatherproof, UL type 4X, enclosure for dust laden, outdoor, or wash-down
    installation environments. Externally adjustable set point, integral mounting
    flange and a removable electrical terminal block for quick and easy
    installation.
  • The Series 616KD Differential Pressure Transmitters with
    One-Touch Digital Push-Button Calibration Technology are designed for
    simplicity, making them the ideal choice for installers and maintenance
    professionals. These instruments not only alleviate cumbersome turn pots
    typically found in most transmitters, but eliminate entirely the need to span
    the instruments during calibration. With a single digital push button, both
    ZERO AND SPAN are calibrated properly, nothing else is required. No additional
    reference pressure sources or separate calibration devices are necessary.
    oof, UL type 4X, enclosure for dust laden, outdoor, or wash-down
    installation environments. Externally adjustable set point, integral mounting
    flange and a removable electrical terminal block for quick and easy
    installation.
  • The Series 629HLP Differential Pressure Transmitters are
    suitable for measuring over-pressure, under-pressure, and differential pressure
    in compatible gases and liquids with 1% accuracy. The 629HLP is suitable for
    all measuring tasks in commercial, industrial or sanitary applications. Its
    single sensor design allows it to measure small increment pressure changes, and
    converts them to a linear analog output signal from 4 to 20 mA or 0 to 10 VDC.
    additional
    reference pressure sources or separate calibration devices are necessary.
    oof, UL type 4X, enclosure for dust laden, outdoor, or wash-down
    installation environments. Externally adjustable set point, integral mounting
    flange and a removable electrical terminal block for quick and easy
    installation.
  • The Series
    3500 Smart Differential Pressure Transmitter
    is a microprocessor-based
    high performance transmitter, which has flexible pressure calibration, push
    button configuration, and is programmable using HART Communication. The Series
    3500 is capable of being configured for differential pressure or level applications
    with the zero and span buttons. A field calibrator is not required for
    configuration. The transmitter software compensates for thermal effects,
    improving performance. EEPROM stores configuration settings and stores sensor
    correction coefficients in the event of shutdowns or power loss. The Series
    3500 can be configured to be ATEX or IECEX approved for use in hazardous
    (classified) locations. The rangeability allows the smart transmitter to be
    configured to fit any application.
  • The Series
    MS2 Magnesense II Differential Pressure Transmitter
    combines the
    proven stable piezo technology and the versatility of our original Series MS
    with additional features to reduce installation time and simplify ordering.
    Like the original Series MS, the second generation transmitter can be used as a
    linear pressure output or a linear velocity output with the square root
    extraction done in the transmitter. Additional parameters have been included to
    expand the square root capability to include flow measurements.
    n coefficients in the event of shutdowns or power loss. The Series
    3500 can be configured to be ATEX or IECEX approved for use in hazardous
    (classified) locations. The rangeability allows the smart transmitter to be
    configured to fit any application.

©2021 All Rights Reserved. Ferret is a registered trademark of Prime Creative Media.