Vibrabsorber anti seismic anti vibration spring mounts

Vibration Solutions introduces the new Vibrabsorber anti seismic spring
mounts from AMC-Mecanocaucho, capable of achieving natural frequencies below 5

Designed as failsafe anti vibration mounts capable of withstanding
traction and compression dynamic forces, the Vibrabsorber anti-seismic spring
mounts offer low stiffness for a range of loads between 300kg and 8000kg. Their
reinforced metal parts allow the type 10 AMC anti-seismic mounts to withstand
shocks produced by seismic events.

Vibrabsorber anti-seismic spring mounts are ideal for stationary
applications where a high isolation degree is required for low disturbing
frequencies (800 to 1500 rpm).

Interlocking metal parts in the Vibrabsorber anti vibration mounts feature
a rubber buffer to avoid metal to metal contact during high shear loads, providing
lateral stability to the suspended element. These lateral metal parts have been
calculated to withstand lateral high forces that may occur in seismic events,
allowing the anti-vibration mount to resist without rupture.

Vibrabsorber anti-seismic spring mounts can be supplied with a Sylomer
layer under the metal part, allowing filtering of high frequency vibrations
that could go through the coil springs. This provides the anti-vibration mount a
higher degree of vibration isolation.

The AMC-Mecanocaucho 10 AMC anti-seismic anti-vibration mounts are
manufactured using several types of springs to suit loads from 300kg to 8000kg
per mount. The metal parts are epoxy coated to withstand harsh corrosive

The AMC-Mecanocaucho 10 AMC anti-seismic mounts
are used in stationary applications where the disturbing frequency is low and
high vibration isolation and lateral stability are required. These include generator
sets, HVAC equipment, pumps or ventilators.

Leave a Reply

© All Rights Reserved. All content published on this site is the property of Prime Creative Media. Unauthorised reproduction is prohibited