Low pressure loss McMenon FPD300 venturi tubes

AMS Instrumentation and Calibration presents the McMenon FPD300
classical venturi tube, a robust, low pressure-loss device available in line
sizes of 50mm to 1200mm as standard, with larger sizes available upon request.

The meter can measure a wide range of clean liquids and gases. Smaller
sized units are machined from barstock or forged bar while larger sizes are
typically fabricated from rolled plate with forged flanges.

For applications requiring exceptionally low pressure loss, a version featuring
a longer outlet cone with a shallower internal angle is available – this combination
reduces the overall pressure loss.

Based on advanced technology, the McMenon FPD300 venturi tubes have a
no-moving parts design, providing a virtually maintenance-free solution. The performance
of the device can be calculated by measuring key dimensions alone, with calibration
available to reduce uncertainty.

McMenon FPD300 venturi tubes are suitable for a wide range of liquids,
gases and steam, and come in various materials to suit the process fluid and working

Key features also include: designs available for high temperatures and
pressures; suitable for horizontal or vertical pipelines; significantly lower
pressure losses reducing operating costs in pumping or compression; good
performance even at high Beta-ratios; less impact from upstream disturbances; profile
resistant to the effects of wear, offering a particularly stable calibration
and long life; tolerance to the presence of some solids in the fluid; and suitable
for passage of multiphase flows and wet gas.

Note: Such applications require the application of special correlations
to correct the flow readings.

For further information, please visit the AMS Instrumentation and
Calibration website www.ams-ic.com.au
or call 03-9017 8225, or Freecall (NZ) 0800 442 743.

Leave a Reply

© All Rights Reserved. All content published on this site is the property of Prime Creative Media. Unauthorised reproduction is prohibited