EXAIR’s pressure sensing digital flowmeters monitoring pressure and flow

EXAIR introduces a range of pressure sensing digital flowmeters designed
for plant personnel to monitor pressure and flow throughout a compressed air

A pressure sensor is mounted between the two flow sensing probes and the
display is configured to show air pressure or air flow. A transistor output can
also be configured to provide a low-pressure alarm to protect both processes
and equipment. Pressure values are displayed in PSIG or BARG. Measuring
compressed air is the first step towards identifying high compressed air use
areas, compressed air leaks and optimising air use.

Each meter ships with the necessary hardware and tools for installation
including drill bit, drill guide and hex wrenches. The pressure sensing feature
is available on 2″ (51mm) or larger flowmeters. They are available in standard
units, which display airflow values on a bright LED screen, with an optional data
logger to capture and control the data. The pressure signal is also available
through optional wired and wireless serial outputs. Airflow values are
expressed in standard cubic feet per minute or cubic metres per hour.

Available from Compressed Air Australia, EXAIR’s pressure sensing flowmeters come in schedule 40 iron pipe, Type L copper and nominal millimetre
sizes. The CE and RoHS compliant range joins EXAIR’s full line of digital
flowmeters for air lines from _Ó through 8″ including hot tap,
wireless and data logging flowmeters.

For further information, please visit the Compressed Air Australia website
www.caasafety.com.au or call 1300 787

Leave a Reply

© All Rights Reserved. All content published on this site is the property of Prime Creative Media. Unauthorised reproduction is prohibited