EXAIR’s new 3/8″ Standard Air Wipe dries, cools and cleans moving material

EXAIR introduces the new 3/8″ Standard Air Wipe, designed to produce a uniform
360¡ airstream to blow off, dry, clean or cool the material passing through it.
The split design of the Standard Air Wipe can be clamped around continuously
moving material such as wire, cable, pipe, hose and extruded shapes.

The 3/8″ Standard Air Wipe ejects a small amount of compressed air through a thin slotted
nozzle that pulls in high volumes of surrounding room air. Coupling brackets hold
each half of the 3/8″ Standard Air Wipe together and can be latched together or
removed quickly. Additional shims can be installed if more blowoff force is

A pressure regulator can be used for variable air velocity while instant
on/off control provides precision blowoff. Air consumption is 11.1 SCFM at 80
PSIG and the sound level is low at only 82 dBA.

Available from Compressed Air Australia, Standard Air Wipes are CE
compliant and available from stock in aluminium in diameters from 3/8″ (13mm)
up to 11″ (279mm).

Standard Air Wipes are ideal for applications such as wiping wire,
drying inks, cooling hot extruded shapes, and blowoff of water, plating,
coatings and dust.

For further information, please visit the Compressed Air Australia website,
www.caasafety.com.au, or call 1300
787 688.

Leave a Reply

© All Rights Reserved. All content published on this site is the property of Prime Creative Media. Unauthorised reproduction is prohibited