4×4 HDMI Multiviewer video matrix switch and video wall processor

The new SPLITMUX-4X4-HDVWC is an advanced HDMI distribution system
from Network Technologies Incorporated, designed to route digital video and
audio signals from HDMI video sources to displays.

Released by Interworld Electronics, the SPLITMUX-4X4-HDVWC 4×4 HDMI Quad
Screen Multiviewer routes digital HDMI video and audio signals from four HDMI
video sources (computers, Blu-Ray players, satellite receivers) to four
displays (monitors, HDTVs, projectors). Any DVI source can be connected via
optional DVI to HDMI cables.

Key features of the new SPLITMUX-4X4-HDVWC HDMI Quad Screen
Multiviewer include video sources displayed in quad, PiP, full, or custom mode
on monitors; custom display mode allowing each of the quadrants to be adjusted
to any size and positioned to any location on the display; 2×2 video wall
processor allowing the video from a single source to be displayed across all
four monitors; support for all HDTV resolutions up to 1080p and computer
resolutions up to 1920×1200; each input can be independently connected to any
or all outputs; and HDMI audio can be switched independently of the connected
video source.

Supported HDMI features include HDMI 1.3, Dolby TrueHD, DTS-HD Master
Audio, Dolby Digital, DTS 7.1 and LPCM2, up to 16-bit xvYCC, RGB, YCbCr and Lip
Sync. With a video bandwidth of 8Gbps, the SPLITMUX-4X4-HDVWC produces clean
crisp video on all displays.

The system can be configured and controlled through front panel buttons,
Ethernet, IR remote control, or an RS232 serial interface. The compact 1RU
design allows the SPLITMUX-4X4-HDVWC to be rack mounted with the included
mounting kit hardware.

Leave a Reply

© All Rights Reserved. All content published on this site is the property of Prime Creative Media. Unauthorised reproduction is prohibited