ACROMAG – New Ethernet Remote I/O Modules Support I/O Expansion of up to 64 channels with a Mix of Signal Types on a Single IP Address

Ethernet modules interface 16 analog or discrete I/O channels and feature an I/O expansion bus linking up to three additional I/O modules.

 Acromag’s new BusWorks® NT2000 series remote I/O modules provide an Ethernet interface for analogue, discrete and temperature signals. NTE Ethernet I/O models have dual RJ45 ports and a web-server with Modbus TCP/IP communication to monitor or control the internal I/O channels.

An integrated DIN rail bus allows connection of up to three NTX expansion I/O modules. Each I/O module adds up to 16 input or output signals allowing a mix of voltage, current, temperature, TTL, and relay control signals networked on one IP address.

The space-saving design requires only 25mm of DIN rail per module. Ethernet I/O modules distribute 9-32V DC power along the DIN rail bus to expansion modules. Additionally, hazardous location approvals, high noise immunity, and -40 to 70°C operation make this I/O ideal for use in harsh environments.

The NT2000 Series offers a broad variety of I/O signal processing options. Nine I/O configurations are available as either NTE Ethernet I/O or NTX expansion I/O models. Analogue I/O models feature eight differential or sixteen single-ended inputs, for monitoring current or voltage signals.

Discrete I/O models provide 16 tandem input/output channels with either active high/low input and sinking/sourcing output. A six-channel mechanical relay output model is also available. For temperature monitoring, a thermocouple input model supports many sensor types and also millivolt ranges. More models will release over the coming months for additional I/O functions.

Currently, the NTE I/O modules support only Modbus TCP/IP communication, but will soon include Ethernet/IP and Profinet protocols. Each module will support all three protocols; which is selectable using any web browser to configure the network settings and I/O operation. The modules typically function as a network slave, but also offer Acromag’s i2o® peer-to-peer communication technology; transferring data between modules directly without a host or master in between. Multicast capability is also included.

This Ethernet I/O Solution offers great flexibility to start small at a remote location with a 2.54cm-wide I/O module then inexpensively add more and/or different I/O channels later on the same network 

Acromag, a mid-sized international corporation, has been developing and manufacturing measurement and control products for more than 60 years. They

offer a complete line of industrial I/O products including process instruments, signal conditioning equipment, data acquis

 ACROMAG is represented in Australia and New Zealand by Metromatics. 

For Further information, please contact:
Metromatics Pty Ltd
P.O Box 1146
NORTH LAKES, QLD   4509
PH: (07) 3868-4255
FAX: (07) 3868-4147
EMAIL: sales@metromatics.com.au
www.metromatics.com.au

©2021 All Rights Reserved. Ferret is a registered trademark of Prime Creative Media.