Interworld Electronics has introduced the new XTENDEX ST-IPHD-2GOPOE
HDMI over Gigabit IP extender with Power over Ethernet (POE) to its popular line
of video and audio extenders.
Featuring built-in video wall software, the new extender broadcasts HDMI
video and audio signals to one or more receivers up to 100 metres away over a
Gigabit network using a single CAT5e/6/7 cable.
Each ST-IPHD-2GOPOE extender consists of a local unit that connects to
an HDMI source and a remote unit that connects to an HDMI display. The local
and remote units can be connected point-to-point via a CATx cable.
The ST-IPHD-2GOPOE HDMI over Gigabit IP extenders can broadcast real-time
HDMI video and audio to multiple display locations by using a network switch to
create a Point-to-Many configuration; cascade network switches up to three
levels to extend up to 300 metres; connect a maximum of 200 remote receiving
units and displays to one local unit when using cascaded managed network
switches; and support video wall configurations from 1×2 to 16×16 displays.
The video wall software is built into the units and can be programmed
through any web browser by entering the IP address of the local transmitting
unit. Installation is simplified with plug-and-play capability allowing receivers
to find the transmitter automatically on the same subnet. Users can access the
web interface for firmware updates. A network switch supporting Power over
Ethernet eliminates the need for a power supply at the local or remote unit.
The HDMI over IP extender supports HDTV resolutions to 1080p, offers
HDCP compliance, has a built-in customisable EDID table, and enables 100/1000
Bps Ethernet connections.
The new HDMI over Gigabit IP extenders are ideal for digital signage,
sports bars and emergency response centres, thanks to their ability to
broadcast real-time HDMI video/audio to multiple display locations.
For more information or to request a quote, please contact