Soldering - Page 10

Popular Soldering Sections:

Soldering News

Ignorance of RoHS is not bliss for SMEs (5/10/2005)

... NPL was initially only researching lead-free soldering, but two or three years of consultancy for firms has revealed widespread lack of ...

Getting ready for WEEE and RoHS (5/10/2005)

... your efforts on these - don’t try to work on thousands.”Soldering without leadOne of the major risks identified was ...

Wirewound inductor with shielded construction (28/09/2005)

... new inductor features excellent solderability and resistance to soldering heat.As a result, designers can integrate greater ...

Farnell InOne warns of RoHS lottery (28/09/2005)

... through the transition to RoHS, including a Guide to Lead-Free Soldering, one of the biggest challenges posed by the legislation, as well ...

Are you ready for RoHS? (28/09/2005)

... task. It has implications for design, component finishes, wave soldering, reflow soldering, inspection and longer–term effects such as ...

RoHS compliance tool for OEMs (12/09/2005)

... materials required for RoHS compliance. To accommodate lead-free soldering, the external layers of the PCB are now made from different ...

Power output up to 15W and output current up to 4A.

Dc-to-dc converters in new configuration (12/09/2005)

... of the adaptor board. Either a reflow solder connection or hand soldering can be used.The SM versions are the second of two ...

Press-fit version of vertical D-sub connector (29/08/2005)

... new press-fit D-subs can accept Erni's THR and conventional wave soldering versions.The vertical press-fit D-subs are part of Erni’s ...

Ultra-compact with high sensing accuracy.

New series of Kingbright photo interrupters (24/08/2005)

... of 5.0mm x 4.0mm x 4.0mm.The unit is mountable with reflow soldering availability and is compliant with European RoHS ...

LPV family with IDC termination for ribbon cables (23/08/2005)

... male connectors are available with press-fit, wave-soldering and through-hole-reflow termination. Besides the standard overall height of ...

The MVP8 M8 equipment is extremely light.

Versatile and variable - MVP8 M8 distribution system (19/08/2005)

... be accurately connected to the MVP8 at low cost on site without soldering, even in cases where space is at a premium. The basic housing ...

Automated robotic soldering solutions (17/08/2005)

... continue to replace wave soldering machines with reflow ovens due mainly to the increase in large percentage of SMT components compared ...

Wirewound inductor with shielded construction (16/08/2005)

... new inductor features excellent solderability and resistance to soldering heat. As a result, designers can integrate greater ...

New 3W current sense resistor (5/08/2005)

... compatible with automated assembly equipment and wave or reflow soldering methods.According to Stackpole, the CSR3’s wide ...

Thin film flat chip fuses (2/08/2005)

... MFU 0603, MFU 0805, and MFU 1206 support lead (Pb)-free soldering and are suitable for processing on automatic SMD assembly systems using ...

Shielded construction offers inductance range of 1.0H to 1000H.

Surface-mount, wirewound inductor (29/07/2005)

... PCs, flash memory devices and converters. It is suitable for soldering and resistant to soldering heat.Inductance ratings of 1.0H to ...

Lead-free electronics assembly workshops (13/07/2005)

... technical challenges of developing and implementing lead free soldering in a production environment.The workshop will be covering the ...

Resistance Range of 0.01Ω to 1MΩ, inductance of Less than 0.1mH.

Thick-film power resistors in TO220 and TO247 packages (4/07/2005)

... of the resistors are compatible with tin/lead and lead-free soldering processes, allowing use by all assemblers changing to lead-free ...

Electronics news in brief (27/06/2005)

... of epoxy, silicon or polyimide. Advantages over conventional soldering include environmental friendliness, fewer processing steps, lower ...

Simplifies assembly through compatibility with reflow or flow soldering.

Thin film chip inductors (24/05/2005)

... and simplify assembly through compatibility with reflow or flow soldering.Applications include impedance matching, RF suppression and ...

Dual-channel, high speed photocoupler (16/05/2005)

... is particularly important during the new higher temperature soldering profiles required for lead-free soldering;* OPIC technology ...

Third of European companies unprepared for lead-free (20/04/2005)

... to a report by the European Union-funded European Lead-Free Soldering Network (ELFNet).“This clearly shows the need for urgent action ...

Suppliers get WEEE breathing space (6/04/2005)

... to a report by the European Union-funded European Lead-Free Soldering Network (ELFNet).“This clearly shows the need for urgent action ...

Q Values up to 49 at frequency range of 100MHz TO 1700MHz.

Thin film chip inductors (6/04/2005)

... construction and are compatible with reflow or flow soldering.The inductors are rated for operation from -40ºC to 125ºC with no load ...

Threat of tin whiskers haunts rush to lead-free (18/03/2005)

... fate of Galaxy 4 - potential equipment failure due to pure tin soldering growing tin whiskers that break off and short out the ...

Resistance options range from 100ƒ¶ to 221kƒ¶.

Flat chip resistor arrays (3/03/2005)

... provides compatibility with lead-free and lead-containing soldering processes. Extensive testing has proven the immunity of the plating ...

Designed to mate with either 1.60mm-thick or 2.4mm-thick cards.

Card-to-board interface for serial ATA (3/03/2005)

... from both sides of the board. It has weld tabs on both ends for soldering to the board. Four standard pin counts are available with a ...

Austronics on the move (1/03/2005)

... all aspects of manufacturing including: PCB manufacturing; soldering technology; contract manufacturing; electronic components, and ...

Combines two components in one surface-mount package.

Twin surface mount PTC thermistors (25/02/2005)

... pick-and-place assembly and suitable for use in lead-free soldering processes. They help to reduce assembly time by providing prematched ...

Combines an IR emitter as the source and a photo diode as the receiver.

Reflective optical sensor (17/02/2005)

... surface-mount package. The sensors are designed for IR reflow soldering with a peak temperature of 260°C. They are therefore suitable for ...