Jacks - Page 8

Popular Jacks Sections:

Jacks News

High pressure jacking equipment (27/09/2005)

... for many companies over the past years, covering a broad spectrum of lifting capacities and designs.Their range of jacks starts at 10t up to 2000t capacity in load return, double acting and safe rams (threaded rod c/w locking collar). Various ...

Enerpac equipment being used at the Newcastle Knights Stadium.

Balancing act brings the roof down (6/09/2005)

... we needed to use a better, more finely controllable system than traditional arrangements using wedging systems or sand jacks," said Mr Burns."In addition to protecting the roof against unwanted flexing and ensuring precise positioning, we were ...

Includes faster down-loading technical articles.

Southwest Microwave new catalogue/CD-ROM (29/08/2005)

... High-temperature SMA adapters (with industry lowest RF Leakage <-100dB) replacing older model numbers* 2.92 jacks for .009” and .015” pins (besides .012” and .020”)* 1.85mm connectors to 67GHz, full line, all new* Direct-solder ...

Modular jacks with lightning strike protection (19/08/2005)

... represented in Australia by Erntec Pty Ltd, has developed a broad range of modular jacks, with integrated magnetics, for 10/100 Ethernet. These jacks are right-angle, single- port configurations meeting IEC60603-7 performance requirements and ...

Programmable, single output dc power supply (12/08/2005)

... Temperature stability* Fast transient response time* Closed case calibration* Sheathed safety banana jacks.The unit has a meter resolution of 10mV and 1mA and is ideal for low power surface mount circuits that require very precise ...

The unit offers a remote programming facility.

High power, regulated dc power supplies (12/08/2005)

... floating at up to a maximum of +/-300V dc above ground.For safety, all three units use 4mm sheathed safety banana jacks. The jacks are designed for safe interfacing and allow the units to meet the latest international safety standards.The ...

Handheld tone generator/cable tracer (14/07/2005)

... the kit) allow the tone generator to be connected to stripped wires, terminal panels, wall plates or modular single line jacks.Outstanding features include the ability to check line polarity and provide talk current on a dead line. The unit ...

Available as jacks and plugs and with a choice of straight or right-angle terminations.

Cables for RF connectors (27/06/2005)

... flexible cables, including double-shielded RG-316.MCX series of mini connector cable assemblies is available as jacks and plugs and with a choice of straight or right-angle terminations. The quick connect/disconnect style connectors are ...

Integrated magnetics in right-angle single-port and ganged configurations.

Modular jacks support Power-over-Ethernet (16/06/2005)

... represented in Australia by Erntec, has released integrated magnetic modular jacks that support remote power applications such as Power over Ethernet (PoE). The modular jacks have either hubs or circuitry for data terminal equipment that can ...

Modular jacks, high-speed/high-density interfaces and new standard options.

Samtec expands I/O interface product line (27/05/2005)

... has added modular jacks and high-speed/high-density interfaces to its I/O interface product line. The modular jacks include top-entry surface mount (MODS-H Series) and LED designs (MODS-F series) in both RJ45 and CAT5 configurations. A combination ...

Cable plug terminations are available for all the interfaces

RF connector line (17/05/2005)

... has released the MMCX, MCX, and SMA RF connectors. The MMCX series of micro-mini connectors is available as jacks and plugs and with a choice of through-hole, surface mount, and edge-mount terminations.A ganged variation of the through-hole ...

The truck trailer is simply driven beneath for loading.

Loading/unloading containers without forklifts, cranes and gantries (12/05/2005)

... load and unload containers to and from trailers more conveniently than forklifts, using special container-handling tynes. Jacks can be manufactured with wheels to suit companies operating totally without forklifts, or constructed with a foot so as ...

Remote controlled automatic fallback switch (27/04/2005)

... Command Port Card and up to 16 Switch Cards. Each card is capable of switching all 8 pins of a common RJ45 jack between jacks "A" and "B".Each card can be switched manually or by command. The RS-232 command port can be connected to a modem to ...

Programmable, single output dc power supply (22/04/2005)

... Temperature stability.* Fast transient response time.* Closed case calibration.* Sheathed safety banana jacks.The Model 9120 is designed to meet the needs of today's applications that require clean reliable power and excellent ...

China catching up in the quality stakes (11/04/2005)

... is one of Australia’s largest materials handling companies specialising in the supply of pedestrian and ride-on pallet jacks, forklifts and tailgates, as well as providing a wide range of support services including training and ...

All stainless steel screw jacks (1/03/2005)

... Pfaff range of screw jacks, distributed by Motion Technologies, includes stainless steel screw jacks for the chemical processing, waste water, and food industries.Aggressive and caustic environments have presented challenges in the past for ...

Welding equipment and consumables (15/02/2005)

... engineering, and the electrical utility industry.Items on display include Simplex high pressure pumps, cylinders and jacks, Sweeney torque wrenches, Izumi battery hydraulic tools for crimping and cutting, tube and pipe benders, worm gear screw ...

Operator comfort has been greatly improved.

4t, 4.5t and 5t forklifts (7/02/2005)

... process in the engine. It is not dependent on regular maintenance intervals to ensure low emissions.Top-mounted tilt jacks allow greater precision and control of the load while residual capacities are increased through a wider range of lift ...

The new 39X Linde lift truck (13/12/2004)

... efficiency, reducing fuel usage and substantially contributing to noise reduction.Linde’s top mounting of the tilt jacks also offers a number of advantages. To begin with, structural stability is significantly increased, resulting in much less ...

Precision dc, mA, voltage and frequency calibrator.

Process calibrator multimeter (13/12/2004)

... backlit dual display showing primary/secondary or source/measure ranges and functions, separate input/output banana jacks with fused protection, and auto power off with disable function. It comes with input/output test leads, a type-K temperature ...

Evaluation kits (20/10/2004)

... corner frequency and dual miniature speakers with volume control. It also has an audio line out and 2.5mm headphone jacks with volume control, a six-digit, seven-segment LED display and a fixed 50mHz clock. It has an RS232 serial port, a VGA port, ...

Pallet bumper for safety (18/08/2004)

... safe distance away. It can also reduce paint chipping, reduce loads bearing on the bollard and decrease damage to pallet jacks or forklift trucks.The is constructed in two halves and then bolted together at floor level, has a steel welded ...

Pallet bumper affords product protection (24/06/2004)

... safe distance away. It can also reduce paint chipping, reduce loads bearing on the bollard and decrease damage to pallet jacks or forklift trucks.The key features of the pallet bumper are:* Easy to install - constructed in two halves and ...

Full line catalogue (5/05/2004)

... pair assemblies.Samtec's I/O interfaces are included in the catalogue. These include a broad line of D-subs, mod jacks, mini-DINs, and serial bus interfaces including USB, mini-USB, and Firewire.The micro-rugged line has been expanded to ...

Handheld 10MHz signal generator (1/04/2004)

... an LED power indicator, the eight wheel push switches that display the frequency outputs on the sine and square wave jacks, output level control, sine connector, square connector, and battery low indicator LED.Operation of the unit is fast and ...

New line of high speed I/O interfaces (18/02/2004)

... and application specific board-level interconnect products.The new I/O line includes D sub-miniature, modular jacks, high frequency serial interfaces and miniature DINS providing customers with "one-stop shopping" for a significant portion of ...

I/O interface catalogue and guide (12/02/2004)

... line and published a new I/O interface guide. Included in the catalogue is an assortment of D sub-miniature, modular jacks, mini DINs and high speed serial I/O interconnects.Samtec D-subs (DSM Series) are available in standard 15.00mm, 8.08mm ...

Residential power line measurement tool (20/01/2004)

... loop is provided in the device for accurately measuring low-current.The ELS2 ac line splitter has convenient built-in jacks for voltage sag ...

E crane lifts the rough-terrain game (12/01/2004)

... the pre-set limits, an audio-visual warning is sounded.Four hydraulic double-box beam outriggers feature inverted jacks and a three-position setting: retracted, 50% and fully extended.A six-cylinder Cummins QSB 5.9L diesel rated at 205kW ...

Dock-less trailer loader (11/12/2003)

... design eliminates the need for operators to work in the confined space of the container with pallets, pallets jacks and forklifts. Products are quickly, easily and safely removed to ground level where they can be promptly sorted and ...