Home > Hand and Power Tools

Hand and Power Tools - News Page 8

Safety Tips For Power Tools
Power tools are a man’s best friend. They save time, offer accuracy when being used and make life easy whether you use them as part of your everyday job or DIY project. However, they can also be an occupational hazard if not handled properly. Here are some quick tips on how to make sure you make the most of your power tools without compromising safety.

Handling
Never carry a tool by its power cord or hose (if one is attached). This will eventually have a negative impact on the integrity of the connection between the tool and the cord/hose.

Never yank a cord to disconnect
Again, as with handling, this will affect the integrity of the power cord or hose. It will also have a negative impact on the power socket and tool’s plug.

Solid footing
Make sure you are on solid footing when using a power tool. This includes when climbing ladders or on scaffolds. Also make sure the floor is not slippery. If there has been a spillage in the work area, make sure it is cleaned up before using the power tool.
By Type
Graco XForce HD cordless airless sprayer
Supplier news
14/02/13 - Graco has designed a new range of cordless airless sprayers for protective and marine coatings.
Edilgrappa combo MU22 rebar cutter and bender
Supplier news
07/02/13 - Stainelec Hydraulic Equipment presents Edilgrappa's Model MU-22 combo series hydraulic rebar cutter and bender.
MAER’s WM500 TC rotary cutter
Supplier news
06/02/13 - MAER S.A of Girona, Spain introduces a new high speed wide mouth PET jar cutting solution.
Ogura’s HBC-232 rebar cutter
Supplier news
01/02/13 - Ogura’s 32mm rebar cutters available from Stainelec Hydraulic Equipment are fitted with protection covers to meet OH&S compliance requirements.
Icaro C42 rebar cutter
Supplier news
31/01/13 - Stainelec Hydraulic Equipment presents a new range of portable rebar cutters manufactured in Italy.
Pro-Cut 12 cordless hydraulic rebar cutter
Supplier news
29/01/13 - Stainelec Hydraulic Equipment introduces the new Pro-Cut 12 cordless battery hydraulic rebar cutters from Edilgrappa.
Icaro TP50/54 combination rebar cutter/bender machine
Supplier news
21/01/13 - Stainelec Hydraulic Equipment presents Icaro's new TP50/54 rebar cutter/bender designed to enable both cutting and bending of rebar from one machine.
Impactool 2130XP-TL impact wrench
Supplier news
04/12/12 - Caps Australia presents the Impactool 2130XP-TL impact wrenches from Ingersoll Rand designed for high-volume tyre change applications.
Employee looking at tool at ANCA’s grinding centre
Supplier news
30/11/12 - Leading manufacturer of high quality CNC tool and cutter grinders, ANCA was a winner at the recently held 50th Australian Export Awards.
Traxx CFQ diamond lubricant
Supplier news
23/11/12 - Traxx Construction Products presents the CFQ diamond lubricant formulated to enhance the performance of diamond tools significantly.
Enerpac W2200 steel hydraulic torque wrench and GT series tensioners
Supplier news
12/11/12 - The professional bolting tools range from Enerpac (A Division of Actuant Corp) streamlines many of Australasian industry’s most common, time-consuming and potentially hazardous maintenance and fabrication tasks.
Kamekura M-40CR electric hydraulic hole puncher
Supplier news
12/11/12 - The Kamekura M-40CR electric hydraulic hole punchers and Kamekura DW-404 threaded rod cutters available from Stainelec Hydraulic Equipment are designed for Unistrut and channel work.

Newsletter sign-up

The latest products and news delivered to your inbox