Home > Hand and Power Tools

Hand and Power Tools - News Page 2

Safety Tips For Power Tools
Power tools are a man’s best friend. They save time, offer accuracy when being used and make life easy whether you use them as part of your everyday job or DIY project. However, they can also be an occupational hazard if not handled properly. Here are some quick tips on how to make sure you make the most of your power tools without compromising safety.

Handling
Never carry a tool by its power cord or hose (if one is attached). This will eventually have a negative impact on the integrity of the connection between the tool and the cord/hose.

Never yank a cord to disconnect
Again, as with handling, this will affect the integrity of the power cord or hose. It will also have a negative impact on the power socket and tool’s plug.

Solid footing
Make sure you are on solid footing when using a power tool. This includes when climbing ladders or on scaffolds. Also make sure the floor is not slippery. If there has been a spillage in the work area, make sure it is cleaned up before using the power tool.
By Type
Porta Powers Range from Kennards Lift & Shift
Supplier news
01/08/16 - Kennards Lift & Shift provides a range of industrial equipment including star hoists, sheave blocks, jinny wheels and minifors for hire.
Torque wrench cassette model for hire from Kennards Hire
Supplier news
01/08/16 - After recently introducing a range of square drive, hydraulic torque wrenches, Kennards Lift & Shift has gone a step further by adding a cassette model.
Truck-mounted cranes
Supplier news
01/08/16 - Kennards Lift and Shift have provided Blacktown City Council with a two-tonne tabletop truck, with a crane fitted at the back.
TorcUP threaded fasteners available from Kennards Lift and Shift
Supplier news
01/08/16 - A range of new, square drive hydraulic torque wrenches can be hired from Kennards Lift and Shift for plant maintenance and decommissioning.
Some of the new planers available for hire
Supplier news
26/07/16 - Kennards Concrete Care have added 40 new planers, 12 mowers and various air tools and road saws to their fleet.
Supplier news
26/07/16 - Starting with a hire centre in Sydney, Kennards Concrete Care quickly added outlets in Brisbane, Melbourne and Perth.
Captive shot blasters
Supplier news
26/07/16 - A new, self-propelled, eight inch captive shot blaster, can be hired from Kennards Concrete Care.
LPG-powered, ride-on scraper
Supplier news
26/07/16 - During the conversion of a former Centrelink office into a restaurant, a ride-on floor scraper from Kennards Concrete Care proved to be a cost-effective
Supplier news
26/07/16 - Kennards Concrete Care provides information on the application of polished concrete floors.
Channels cut for carbon fibre
Supplier news
25/07/16 - A section of concrete in a new industrial estate, which was damaged during construction, was restored to its original strength.
Garrett Field operates the road saw
Supplier news
25/07/16 - Road saw from Kennards Concrete Care supplied a self-propelled, 20 inch (500mm) road saw that completed work in extra quick time
Supplier news
25/07/16 - Kennards Concrete Care, has added a new model, wet-cut petrol concrete chainsaw to its extensive range of specialty hire equipment.

Newsletter sign-up

The latest products and news delivered to your inbox