Home > Food & Beverage Processing

Food & Beverage Processing - Videos Page 4

Tips on Sanitation in Food Processing Plant

Make the Hard decisions
Don’t be afraid to make unpopular decisions. Food poisoning outbreaks can appear in any part of the food chain – from the manufacturing process through to restaurants and the home. If you work in the food processing industry and you think equipment has been compromised don’t be afraid to make the call and stop a production run. It might cost some downtime, or even plant replacement. However, the alternative could be not only the loss of a customer and damage to your reputation, but in extreme cases loss of life.

Keep the maintenance department in the loop
Too often the maintenance department is ignored. Planned maintenance not only saves on unnecessary downtime, but can bring up unforeseen issues that might have been missed if maintenance had not been scheduled.

Make sure all bases are covered
It’s not enough to have well-kept and clean equipment inside the processing plant. You must make sure that the area and surrounds are kept clean, too. What are your processes for off-cuts? For wastage? Are there processes in place whereby rubbish and waste products are disposed of in a sanitary manner? If you have a lax attitude towards these kinds of issues, it leads to sloppy best practices, which could come back to haunt you during inspection time.

Being preventative is proactive
Similar to keeping the maintenance team in the loop, it’s good to have a preventative program. Again, it might cost a little downtime and money, but could also save money in the long run. This not only includes making sure equipment is kept in top-notch condition, but also dealing with pests that are attracted to food processing factories.
Scientifica - Multiphoton Imaging System
Scientifica is offering you a compact, cost-effective and modular 2-Photon & Multiphoton Imaging system that offers superb return-on-investment.
Image Metrology – Particle & Pore Analysis in SPIP
With the Particle & Pore Analysis Module in SPIP you can easily detect and quantify particles, pores, grains, and other image features with boundaries. You can detect features of any shape and size on virtually any surface.
TeraSense - Terahertz Imaging Camera
Terasense new video about THz imaging camera and THz source (IMPATT diode), their capabilities and possible applications. The terahertz camera operates in 50 GHz - 0.7 THz frequency range with record sensitivity and noise parameters.
Photometrics -  PrimeEnhance Camera Feature in Micro-Manager
View this video to learn how to reduce photon noise with the PrimeEnhance feature in the Photometrics Prime sCMOS camera when using Micro-Manager software. See how PrimeEnhance improves signal to noise 3-5x, enabling significantly lower exposure times. ...
ASI - Dual-View Inverted Selective Plane Illumination (diSPI
ASI - Dual-View Inverted Selective Plane Illumination (diSPIM)
JPK Instruments – Atomic Force Microscopy JPK Nanowizard
Using the example of the NanoWizard®II atomic force microscope (AFM), this animation illustrates that only a tip-scanning AFM such as the NanoWizard®I, II or 3 from JPK Instruments truly enables simultaneous AFM and optical microscopy measurements.
Nanofocus - µsurf: 3D surface measurement
Learn more about the patented confocal technology with this animation. Understand how the industry-suited µsurf confocal microscopes work and how you can analyze your surfaces three-dimensionally with high resolution within seconds
GW Instruments – instruNet Data Acquisition System
GW Instruments – instruNet Data Acquisition System
JPK Instruments – Optical Tweezers NanoTracker Fluorescent D
This video playfully demonstrates the versatile manipulation of single biomolecules using JPK's NanoTracker optical tweezers platform, simultaneous to sensitive fluorescence microscopy in a JPK's microfluidics flow cell. A native (non-fluorescent) DNA ...
Nanofocus - µsprint: Fully Automated Wafer Inspection
The ideal combination of high resolution and fast measurement speed for the fully automated 3D inspection of interconnectors
FLIR CM174 Imaging 600A AC/DC Clamp Meter
The FLIR CM174 Imaging 600A AC/DC Clamp Meter is the only clamp meter with the power to lead you to problems you can't see with a standard clamp meter. Featuring Infrared Guided Measurement (IGM) technology powered by an integrated FLIR Lepton® thermal ...
FLIR Systems Australia
SliceScope Pro Systems Overview for Electrophysiology and Li
An overview of the SliceScope Pro Microscopy systems, the equipment that is common to all the systems, and applications that the systems

Newsletter sign-up

The latest products and news delivered to your inbox