Curing - Page 5

Popular Curing Sections:

Curing News

Printed circuit boards (26/07/2006)

... with a resolution of 0.001mm, equivalent to 720dpi.PCBFast can now print PCB legends in white (standard), using UV curing inks supplied by Xaar. Other colours (black, red, yellow, and blue) are also available using standard ...

Dual function temperature switch (25/07/2006)

... cooling system failure.Typical applications include equipment involved in metals forming or fabricating, cooling, curing, moulding, stamping, and cutting.The FLT is suitable for use with water and a wide range of other coolants, fluids and ...

Powder coating (19/07/2006)

... Coating Services.The powder is electrostatically sprayed onto the surface to be coated and then placed in a curing oven where the product is heated and fuses into a smooth coating. The result is a uniform, durable, high-quality, and attractive ...

Polyurethane anti-slip floor coating for vinyl surfaces (4/07/2006)

... traffic.Advantages include:* Single pack - no mixing required* Brush, roller or spray applied* Quick curing - generally overnight* Tough, durable and flexible* Impact and vibration resistant* Odourless when cured* ...

Rubber stamp die laser engraving (2/06/2006)

... free surface to produce an acceptable printed image from a stamp die.The rubber must also be subjected to a specific curing process before it can be exposed to the elevated temperature of a laser beam.The depth of the engraving is ...

Adhesives Flow Into New Markets (19/01/2006)

... eliminate the cost of carrying various size fasteners, and you don't need lock washers.What's changing in adhesive curing?Curing speed is always a fine line. People always want it to be faster, but it can be too fast, setting up too ...

Tool Tips: Materials, Manifolds & More (19/01/2006)

... microprocessor-controlled, closed loop molding machines. Maximum properties are achieved only through a post-curing ...

Light-Cured Adhesives for Bonding or Protecting (19/01/2006)

... ceramics, plastics and other dissimilar substrates in a range of OEM applications, these high-tech adhesives offer curing schedules and produce flexible bonds that withstand service temperatures from 18.33°c to 107.22°c. Available in three ...

Axcelis Signs Low k JDA with Asian Chipmaker (18/01/2006)

... vendor Axcelis Technologies Inc. said today it has entered into a joint development agreement for advanced low-k film curing with a large Asian chipmaker.Axcelis declined to identify said chipmaker, but did say that it has had a long-standing ...

Eye Research Site Sees the Light (16/01/2006)

... mere container of cutting edge research. Its lab environment plays a significant role in reaching its daunting mission: curing blindness.Previously, the center was split into two areas, with space in its own building and an adjacent building. ...

Next-Generation Low-k Focus of IITC (16/01/2006)

... key measure of dielectric robustness — was equivalent to that of 65 nm technology.A Selete team will describe how UV-curing technology improved the mechanical properties of a porous, plasma-enhanced CVD SiCOH ultralow-k dielectric (k<2.4). ...

Sematech, Novellus Work on Ultra Low-k Integration (13/01/2006)

... depositing ultra low-k films, as well as a novel ultraviolet thermal processing (UVTP) system for post-deposition film curing. Both systems will be delivered to Sematech in October. Novellus will also provide bulk film development and support, ...

Adhesive Lights Up First (13/12/2005)

... gets around this problem with a patent-pending chemistry that needs light only to start, rather than finish, the curing process.Susan Levanvoski, a Loctite development scientist, describes this new one-part, liquid adhesive as a "cationic ...

Making sense of Semicon (13/12/2005)

... of advanced transistor technology and changes in the related materials sets. Low-temperature processing, ultraviolet curing, flash annealing, laser processing—all of the players in these spaces, both old and new, will likely have some interesting ...

Industry ignoring advances in adhesives (7/11/2005)

... a lot of steps into a simple peel and stick process,” he said.“Some manufacturers are moving away from traditional curing types of adhesives to a pressure sensitive adhesive tape in order to increase productivity,” Williams said there is also ...

Watlow’s RAYMAX family suits all types of radiant heating applications.

Solve almost any application requiring radiant heat (21/10/2005)

... of radiant heating applications.Applications include:* Thermoforming* Food warming* Paint and epoxy curing* Heat treating* High temperature furnaces* Tempering and annealing processes.Radiant heaters must not be ...

Space efficiency and transportability are major features of the Hydroblast.

Rapid, controlled curing of concrete products (7/10/2005)

... products such as pipes and pre-fabricated concrete slabs and walls.Frequently, the source of the problem is improper curing in relation to climactic conditions.Air movement specialist, Fanquip, with the recent introduction of its ...

The right chemistry for the UV cure (27/07/2005)

... solids. Unlike conventional oxidative drying where heat is often used to drive solvent from the wet ink or varnish, UV curing changes the liquid (wet) to solid (dry) state almost instantaneously as the print is passed at high speed under the UV ...

Cold stamping foils (15/07/2005)

... stamping transparent foils, the adhesive in the areas that are to be printed is replaced by adhesion-promoting, radical curing UV printing inks. No additional printing unit for underprinting is required.Cold stamping offers the labelling ...

Stainless steel strainer prevents clogging when using an impure water supply.

Nozzles offer increased fluid speed (28/06/2005)

... Systems has released IceJet nozzles, suited to tasks including humidification, concrete curing, odour and misting control and other applications requiring the atomisation of high volumes of liquid without compressed air.The IceJet design is ...

Space-efficient vertical product transfer between floors.

Spiral conveyor moves heavy or light products (17/06/2005)

... floors. The system can be built to a precise user-specific travel length and height.The product is suitable for the curing process of moulded products. Where chemicals are used, wash down is fast and simple. Units are suitable for cooling and ...

Tyres filled with the flatproofing material last two to five times longer than air-filled tyres.

Flatproofing tyre treatment (10/05/2005)

... liquid polyurethane flatproofing polymer is pumped into a tyre through its valve system, replacing all of the air and curing to a resilient synthetic rubber core in 24 hours. The system helps avoid tip-overs due to sudden flats and provides better ...

PACE Zenith Awards 2005 (9/05/2005)

... overhead hooks on a transport chain that carries the cylinders through a powder coating paint line. After painting and curing, the cylinders needed to be manually unhooked. The line processed up to four cylinders per minute and required the ...

Concrete pipe curing system (15/04/2005)

... has released the Hydroblast system for curing concrete pipes. It combines the action of a very fine water mist with selected speed of air movement to control indoor humidity levels during the critical curing phase of such industrial products. ...

Improved testing reduces construction times (24/01/2005)

... process replicates the site conditions accurately and provides data suitable for improving the management of the curing ...

Conveyor system for OPSM (1/09/2004)

... ceiling of the grinding room. Trays are then transferred onto four accumulation conveyors, which provide 45 minutes of curing time between the blocker and the generator, allowing the blocker to set between machines.In the fitting room, trays ...

Measures from 200nm-1100nm at 1nm resolution.

Research grade spectroradiometer (31/08/2004)

... research grade spectroradiometer with a USB interface.Applications include characterisation and diagnosis of UV curing, photostability testing, accelerated weathering, LED illumination and colour analysis. The IL RPS 900 is also suitable for ...

Benchtop coordinate robot (6/08/2004)

... combined with a high performance spray valve, a wide range of conformal coatings, including high viscosity UV curing materials, can be applied.The Dymax range of UV curing adhesives, coatings and potting compounds offers considerable ...

Run-around energy recovery (23/06/2004)

... thermal loop energy recovery system.They have been successfully applied in Australia to dehumidification, drying and curing applications in many industries including food processing, timber drying, packaging and others. The basic systems ...

Extended range of coordinate robots (16/06/2004)

... range of liquid dispensing operations including formed-in-place gaskets, sealing, bonding, encapsulation, potting and UV curing materials.Applied Machine Tools has the experience and technology to handle the integration of these robots into ...