Couplers - Page 6

Popular Couplers Sections:

Couplers News

Multi-hole directional couplers (4/07/2005)

... CDC Series multi-hole directional couplers are available from RFI Industries for the frequency range of 18 to 110GHz in seven waveguide bands.The standard coupling levels are 3, 6, 10, 30 and 40dB with full waveguide operational ...

Slim-nose radius and 360º swivel hose connection for easier tool positioning in confined areas.

Square and hexagonal torque wrenches (4/04/2005)

... operation, which increases tool portability and reduces cycle times. Standard equipment includes quick-release couplers and a reaction arm, as well as push-button drive release, with no tools needed to reverse square or Allen-key drives for ...

Can be operated at up to 120m from the host machine.

Portable hose reel (10/03/2005)

... comes on a stainless steel carry frame that makes it easy to move around. The hose assemblies are supplied with quick couplers quickly detaching accessories including guns, flat surface cleaners, high pressure turbos and drain cleaning ...

The new industrial relay range from Phoenix Contact.

Cost-effective industrial relays and bases (9/03/2005)

... relay base range from Phoenix is a modular system comprising various relay bases, pluggable relays and opto couplers, input and suppression modules, relay retaining brackets with eject function, and identification plates.Depending on the ...

30% smaller than previous PowerStar modules.

Power amplifier modules (17/02/2005)

... transmitter yields and minimises design time. The integrated power control function eliminates the need for directional couplers, detector diodes, power control ASICs and other power control circuitry, which allows the module to be driven directly ...

Ideal for microwave radio, test and sensor applications.

Eight new in-phase and quadrature mixers (11/02/2005)

... rejection performance would be difficult if not impossible to achieve on a production basis using mixers, splitters and couplers in a hybrid MIC or PCB based approach.MMIC IRMs provide these levels routinely.Each of the mixers is ...

Typical supply voltage as low as 3.3Vcc.

High-speed optocouplers (9/12/2004)

... Compound Semiconductor Devices, represented in Australia by Soanar, has released three high-speed optocouplers. The single and dual-channel devices are capable of 10 Mbps transfer speed.They are supplied in SOP and in SO8 packages. The ...

Fed up with your energy bill? (2/11/2004)

... the easiest problems to rectify. Examples include poor quality fittings and tube, incorrect installation of air line couplers, pin holes and cuts in tubing due to weld spatter, dynamic wear and fatigue. These leaks can be eliminated completely by ...

High-speed Optocouplers (27/09/2004)

... Compound Semiconductor Devices, represented in Australia by Soanar, has released three high-speed optocouplers.The single and dual channel devices are capable of 10Mbps transfer speed. They are supplied in SOP and in SO8 packages for compact ...

Energy saving ideas (30/07/2004)

... problems to rectify.Leaks can be caused by poor quality fittings and tubes, incorrect installation of air line couplers, pin holes and cuts in tubing due to weld spatter, dynamic wear, and fatigue. Such leaks can be eliminated completely by ...

Resistor Arrays (10/06/2004)

... noise of -35dB, and a voltage coefficient of 0.01ppm/V. Applications include amplifiers, oscillators, attenuators, couplers, and filters in instrumentation, calibration, and data conversion ...

25A/20A isolated eight-brick dc/dc converters.

25A/20A dc/dc converter modules (15/04/2004)

... and precise timing of the synchronous rectifiers increase efficiency. The topology eliminates the need for opto-couplers, increasing reliability and ensuring that the converters provide fast transient response. The output voltage typically ...

Directional couplers (24/03/2004)

... has released the WSDC-00006/WSDC-00007 low cost, high power, and high directivity couplers. They are available from Electronic Development Sales.The couplers utilise Micro-Strip technology and offer a VSWR less than 1.15:1, flatness of ±0.1 dB ...

Weidmuller’s Plugseries relay and opto-couplers.

Relay and opto-couplers (10/02/2004)

... electromechanical and solid state relays from different manufacturers to make complete functional units.The relay couplers Plugrelay can switch high power ratings up to 4kVA of resistive loads. The solid state relays Plugopto are suitable for ...

MRAM gets new spin (2/12/2003)

... of microelectronics. NVE licenses its MRAM intellectual property and sells spintronic products including sensors and couplers to enhance data sensing and transmission.Some of NVE’s licensees are beginning to commercialise MRAM. Motorola ...

Plug-in electronic device simulator (19/11/2003)

... MOS1, MOS2, MOS3, MOS6, BSIM1, BSIM2, BSIM3.3, SOI, BSIM4, and EKV models, JFET, BJT, SCR, op-amps, diodes, opto-couplers, regulators, multipliers, timers, sample-and-hold circuits, bridge rectifiers, power diodes, and more.The library browser ...

KRONE products IEEE compliant (28/10/2003)

... excess of those specified. KRONE's PremisNET solutions contain compliant cables, jacks, patch panels, patch cords and couplers.Power over Ethernet (PoE) is said to be the next big thing in structured cabling. With the power injected at the ...

Next-generation broadband light source (9/10/2003)

... devices tested include PON components, CWDM components, Bragg gratings, attenuators, photonic switches, broadband couplers, specialty couplers or multiplexers, isolators, circulators, hybrid components and depolarisers.EXFO's broadband sources ...

Motor drive and inverter chip set (21/08/2003)

... two external comparators and a level-shift operational amplifier to achieve the same function.In addition, as opto-couplers age, the current transfer ratio (CTR) between the LED and receiving device degrades, causing system failure. By ...

Piping hot products for mining industry (28/07/2003)

... sourced new O rings made from chemical resistant EPDM and Viton A, which can either be retrofitted to existing Metric couplers or supplied with new product.Nut fittingsMackenzie says Philmac has also developed a complete modified nut ...

Pipe fittings for the mining industry (1/07/2003)

... sourced new O-rings made from chemical resistant EPDM and Viton A, which could either be retrofitted to existing metric couplers or supplied with new product."This is ideal if the fitting is connecting pipes which are transporting corrosive ...

Couplers for air and water (5/06/2003)

... Pneumatics has expanded its range of S couplers with the addition of the stainless steel KKA Series, suitable for handling both air and water.Unique to this range is a built-in check valve which is available on both the plug and socket to ...

Current sensing motor drive chip set (30/05/2003)

Smallest thin-film resistors (16/05/2003)

... microwave and RF requirements.Typical applications for new devices include amplifiers, oscillators, attenuators, couplers, and filters.Devices in the Microwave Resistor series feature a microwave resistance range of 20Ω to 1kΩ ...

Fibre optics shed new light on remote control operations (30/01/2003)

... bucket arms and hydraulic hoses.Silver Swan staff welded a protective steel sleeve to each arm into which the out-couplers were fitted.According to Hella business development manager - mining Urbain du Plessis, operating mining equipment ...

High pressure, 700 bar, FS series flange spreader.

Powerful hydraulic flange spreaders (12/12/2002)

... is available.Both the FS-56 and FS-109 spreaders are available individually or as sets incorporating tool gauge, couplers, hose and handpump.With the FS56 and FS 109 pump-spreader combinations weighing approx 15 and 22kg respectively, the ...

Three-phase inverter-driver IC (27/11/2002)

... dV/dt immunity and low di/dt drive current for noise immunity.The IR2136 delivers higher performance than opto-couplers or transformers, and allows high frequency operation with a deadtime as low as 250ns, and a typical turn-on/turn-off time ...

Hydraulic maintenance kits (7/11/2002)

... and clamping.These include (in addition to pump and cylinder) hose, gauge, lock-on or threaded connectors, clamps, couplers, chains, wedges and spreaders. Safety features include jacking bases for stability and serrated saddles for maximum ...

Three-phase inverter driver IC (24/10/2002)

Three-phase inverter driver IC (23/10/2002)