Cooling Fans - Page 3

Popular Cooling Fans Sections:

Cooling Fans News

Uses the latest RAID processing technology.

SecurStor 8SATA DAS (23/01/2006)

... been eliminated.All of the critical components within the subsystem, including the power supply units and the cooling fans, come in redundant pairs and are hot-swappable.Using the latest RAID processing technology and newest ...

Waterproof AC Induction Motors (11/01/2006)

... food service and other washdown applications where the motor is not normally submerged, the units are supplied with cooling fans. For marine or nuclear applications where submerged motors are cooled by the surrounding water fans are not supplied, ...

Sophisticated drive solution (15/12/2005)

... power losses through the use of new generation IGBT power semiconductors resulting in lower operating noise from cooling fans* Significant energy savings, particularly with frequent braking cycles* Guarantee stable output voltage, even in ...

Provides users with massive storage capacity.

SecurStor 24 disk direct attached storage (4/10/2005)

... featured RAID capabilities, all the critical components within the subsystem including the power supply units, the cooling fans and the hard drives come in redundant pairs and are hot-swappable.The SecurStor 24SATA comes with Ultra320 SCSI ...

Part of the new 2005 range of Grasshopper models, the 322D/61 sports, with a 61” (2.4m) wide cutting deck and Kubota liquid cooled diesel engine.

Grasshopper ZeroTurn: Diesel models expanded (27/09/2005)

... available from the manufacturer. This specification is rated at 40°C plus and includes larger radiators, improved cooling fans and bigger screens.The models also feature even more comfort, with less vibration, better legroom and a new ...

Is available with standby voltages of either 3.3V or 5V.

Ac/dc front end power supply (15/09/2005)

... of the unit are 304.8mm x 120.7mm x 40.6mm. Operating temperature range is 0°C to +50°C. The enclosure incorporates cooling fans.Three D1U-W-1600-12-HC units fit into an optional 1U high 19" wide Powershelf, for a total system power of ...

Safety range of power inverters (12/09/2005)

... to be run with high start-up loads, noise-free filtering, protection against overload, low battery warning, cooling fans and twin power outlet sockets.Protection features include sophisticated circuitry to monitor the operation and turn off ...

Redundant dual ac input industrial chassis (3/08/2005)

... 20 slot, industrial PC platform chassis.The enhanced features of the IPC-623-B includes three 114 CFM high-speed cooling fans with upgraded fan boards, high-power N+1 redundant power supplies for up to 810W with 3+1 configuration, and upgraded ...

Six GPIOs can be used for setting POR states and controlling VID.

Temperature monitor and fan controller (22/06/2005)

... 1°C accurate, dual-channel temperature monitor and fan controller. Each monitor/controller controls the speed of two cooling fans based on the temperatures of either two thermistors or one thermistor and the device's internal temperature.For ...

SEW begins local assembly of servo motor packages (16/05/2005)

... as an option.A selection of high-performance electro-mechanical brakes are available, as are optional forced cooling fans, which increase the servo motor’s static torque to 145 per cent of the standard ...

Has a two-position PCI riser card and two front accessible USB ports for expansion.

2U rackmount chassis (9/03/2005)

... for expansion. Front panel indicators include power, HDD and three LAN LEDs. The 1cm x 8cm 42.5CFM and 2cm x 4cm 7CFM cooling fans ensure the chassis is well ...

Three-phase locally-assembled servo motors (9/03/2005)

... as an option.A selection of high-performance electro-mechanical brakes are available, as are optional forced cooling fans, which increase the servo motor's static torque to 145 per cent of the standard value.An important feature of the new ...

Dual remote-diode temperature sensor with ±0.75ºC accuracy.

Temperature sensing for sub-micron CPUs (8/03/2005)

... consumer electronics incorporate more sub-micron processors and FPGAs that tend to run hot, engineers need to design cooling fans into their systems to prevent overheating.By providing accurate temperature reading, National's TruTherm ...

Servo products and positioning systems catalogue (22/11/2004)

... to 6000 rpm.The MicroFlex Brushless ac servo drive has been extended to include RS232 and RS485 models. Optional cooling fans are available for larger drive models.NextMoveST has been added to provide a low-cost drive motion system for ...

EP series motor and gearbox combinations.

Food grade drive combinations (17/09/2004)

... impregnated then double oven dried.* Four condensation drain holes in front and rear end covers.* Motor cooling fans from inert polyamide plastic.Options facilitating customisation to special applications include finishing in RAL paint ...

Food grade drive combinations (17/08/2004)

Temperature sensor and fan controller (8/06/2004)

... sensor and fan controller. It offers remote temperature sensing up to 145°C and automatic adjustment of two cooling fans to minimise noise and improve efficiency.It also has five general purpose I/O pins, which allow a user-programmable ...

Rackmount chassis with hot swap drives (7/04/2004)

... are 400W ATX for P4 or 400W ATX for Xeon CPU's. High efficiency cooling is provided by six 10mm ball bearing cooling fans.The front panel includes two USB ports, and power and reset switches. Also provided on the front panel are indicators for ...

Interworld Electronics’ Horizon104 industrial chassis.

Rack mount enclosure for PC/104 (6/04/2004)

... be better cooled than cramped stacked units or traditional 1U PCI/ISA systems. The Horizon104 has two front-mounted cooling fans drawn through an industrial re-usable filter with over 20CFM of cooling for this small 1U chassis in addition to the ...

Single and three phase drives (4/03/2004)

... for flow control applications. They also include operating and trip counters of kWh and time, temperature dependant cooling fans for optimising energy consumption and extensive drive and motor protection functions. An extensive monitoring menu, ...

The RAK-380X chassis for servers with large storage requirements

Chassis for large-storage servers (26/02/2004)

... system reliability. In addition to the standard power supply exhaust fan, the RAK-380X provides four 9cm 51CFM cooling fans and one rear mounted 6cm 23.5CFM exhaust fan to ensure the drive bays, motherboard processors and expansion cards are well ...

Industrial chassis for server applications (8/01/2004)

... including a 500W ac redundant power supply for those business critical applications.Two front mount 9cm hot swap cooling fans and one rear mounted 12cm exhaust fan ensure the chassis is well ventilated.MORE ONLINEInterworld Electronics ...

Compact, basic MIG/MAG welding machine (28/08/2003)

... were selected after careful testing and the degree of protection is to IP 23C. Power sources have duty controlled cooling fans as well as over-temperature and over-current release.To minimise wire feed disturbances, the euro-connector of the ...

Transmeta signs up design partners (13/06/2003)

... claims the company’s energy efficient processor architecture enables embedded devices that do not require cooling fans, eliminating the potential for fan failures that impact system reliability.The requirement for Transmeta to enter into these ...

Soft starters for total control (20/02/2003)

... CA 7 contactor and KT 7 breakers are readily available, as are optional auxiliary contacts, remote reset solenoids, cooling fans for high cyclic operation and marking tags for clear labeling of system ...

Performance and reliability at a cost-effective price.

High speed, high performance rackmount server (28/11/2002)

... stable performance, the RS-100-SF provides excellent ventilation and temperature control with five easily replaceable cooling fans, providing a total of 75cfm ventilating power.Compact in design, delivering powerful performance and reliability ...

LaCie’s aluminium housed d2 portable hard drive.

Portable USB 2 desktop hard drives (20/09/2002)

... only enhance appearance but also increase heat dissipation and prolong drive performance.Without the necessity of cooling fans, LaCie d2 hard drives show a noise reduction of up to 50 per cent, according to tests.The LaCie 80GB, 120GB and ...

Designed for installation into standard 19” rack units.

Three-in-one rackmount compact server (14/08/2002)

... unit includes one slim-line CD-ROM drive, one 3.5" IDE HDD, a 100W open-frame power supply and two 4cm ball-bearing cooling fans.The AX6113 is designed for installation into standard 19" rack units. This new architecture allows for three ...

2U four system rackmount chassis (20/02/2002)

... Pentium III and Pentium 4 boards.Each removable system supports a single board computer, two 4cm ball bearing cooling fans and a 3.5" hard disk drive.Every system offers up to two Ethernet ports, two RS232 ports, a VGA port and a PS/2 ...

Server solution in a small package (13/02/2002)

... PCI expansion slots, a robust 300W ATX power supply, a redundant 300W ATX power supply, one 10-CFM and four 39-CFM cooling fans that provide more than sufficient ventilation. Advantech 02 9482 ...