Clamps - Page 3

Popular Clamps Sections:

Clamps News

Sara Jane Furniture install Ezi-Duct modular ducting (19/02/2009)

... used Ezi-Duct galvanised steel modular ducting from 80mm diameter to 700mm diameter combined with all the ducting clamps, fittings, slide dampers, flexible ducting and hangers needed to complete the installation.Sara Jane Furniture are major ...

Ezi-Duct and ADC supply dust collection system to plastic manufacturer (18/02/2009)

... install. They did the installation in-house.The advantages for Polymer Engineering are long term as Ezi-Duct ducting clamps together. The customer can easily pull the system down for cleaning or if a blockage occurs. Ezi-Duct ducting has a ...

TempVent ventilation ducting available from Eximo (13/02/2009)

... in combinations of cuff ends for fixing to spigots, and end rings for joining individual links with quick-release clamps.TempVent ventilation ducting is lightweight and depending on the diameter, it can weigh anywhere from 1.2kg per metre to ...

Ezi-Duct install dust collection system at Lake Maquarie Council (13/02/2009)

... install and they did the installation in-house without the need for outside contractors.As Ezi-Duct ducting simply clamps together, the customer can easily pull the system down for cleaning or if a blockage occurs. Ezi-Duct ducting also ...

The KoCoS EPPE C8 Power Quality and Power Line Monitor

KoCoS EPPE C8 Power Quality and Power Line Monitor available from Westek Electronics (12/02/2009)

... to 600V rms AC. Current can be measured directly to 40A rms AC or indirectly utilising current transformers or current clamps. Current and voltage are sampled at 30kHz frequency using high resolution 16 bit ADCs, and digital inputs are sampled at ...

All Repairs & Maintenance install Ezi-Duct paper trim collection system (12/02/2009)

... can frequently block up, so the advantage for the printing company is also long term.As Ezi-Duct ducting simply clamps together, the customer can easily pull the system apart if a blockage occurs or for cleaning. Ezi-Duct ducting also provides ...

Mitsubishi FR-D700 inverters available from Automation Systems & Control (5/02/2009)

... drive, the D700 series. Improved functions and device properties such as simplified cabling with the help of spring clamps, the integrated Digital Dial with LED display, improved performance yield in the low-speed range as well as the ...

Drexel forklifts for material handling applications available from NSW Lift Trucks (2/02/2009)

... The Bendi. A variety of hydraulic attachments can be atttyached to this narrow aisle forklift. These include paper roll clamps, carton clamps and push/pull, drum ...

Drexel forklifts for material handling applications available from NSW Lift Trucks (2/02/2009)

... The Bendi. A variety of hydraulic attachments can be atttyached to this narrow aisle forklift. These include paper roll clamps, carton clamps and push/pull, drum ...

Intelligent automation facilitated by the IQ40 inductive sensor from Sick (21/01/2009)

... range helps users set up a more reliable application.The simple sensor mounting offered by its integrated fixing clamps makes it suitable for use by machine constructors, particularly as the active area can be rotated in five directions – ...

EXAIR Super Ion Air Wipe available from Compressed Air Australia (12/01/2009)

... new Super Ion Air Wipe from EXAIR provides a uniform 360° ionised airstream that clamps around a continuously moving part to eliminate static electricity and contaminants. It is suitable for removing dust, particulates and shocks on pipe, cable, ...

The 19 inch rack mount fibre optic termination box

19 inch Rack Mount Fiber optic termination box available from Diamond Australia (8/12/2008)

... on front with spring type screws Shipment configuration is 1 ea. PG16 plug and 4ea. plastic cable organiser Cable clamps on the inner surface for fixing cables 1U 19" rack mount Sliding type tray to access pigtails Sliding type rack mount ...

System Plast conveyor component range from Dotmar EPP for machine guarding applications (4/12/2008)

... Once a frame module is constructed, Safeguard PC panels are fitted to the frame and clamped into position with durable clamps.With a selection of hinges and latches available, the frames allow easy access to the machines for operation and ...

Open-chute and lift-and-seal drum dumper models available from Flexicon Corporation (21/11/2008)

... fitted to process equipment or the lid of an optional Flexicon hopper, eliminating the need for connecting sleeves and clamps.Optional hopper with Flexicon flexible screw conveyor adapter is also available with universal flanged outlet or ...

Automated Warehouse Truck to replace manual forklifts in warehouses

Industrial Conveying (Aust) offer Automated Warehouse Trucks to replace manual forklifts (19/11/2008)

... facility. Additionally, counterbalanced vehicles can use various attachments including pallet forks, reel forks, reel clamps or reach forks. Without the need for human intervention, the AWT-based system offers efficiency, increased ...

Positek A111 LIPS position sensors available from Applied Measurement Australia (13/11/2008)

... range.The position sensor is easy to install with mounting options, including M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with a female M8 thread, an M8 rod eye or dome end.Captive push rods can be ...

Fluke 1625/1623 GEO earth ground testers available from Fluke Australia (5/11/2008)

... Specifically, the Fluke 1623 and 1625 testers are able to measure earth ground loop resistances by using only clamps known as the Stakeless testing method. This method does not require the use of earth ground stakes or the disconnection of ground ...

Terminal Lugs available from Australian Solenoid (5/11/2008)

... lugs from Australian Solenoid for screw with wire clamps facilitate the connecting of wires in installations where the terminals are not easily accessible. All X switches, L switches and switches type C315/C316 will be supplied with terminal ...

Lifting equipment such as chain hoists, winches and wrenches available for hire from Air Powered Services (31/10/2008)

... blocks (Snatch bocks to redirect winch wire ropes, increase winch effort or to slow winch speed) Girder trolleys and clamps (Girder trolleys allow air hoists to run along beams or girder clamps where a fixed position is required) Lifting ...

Murray stainless steel pinch clamps for irrigation applications available from All Valve Industries (24/10/2008)

... are used to attach a fitting to a hose or even to join hoses together. Murray stainless steel pinch clamps, available from All Valve Industries, are widely used in the irrigation industry.Murray stainless steel pinch clamps are handy for ...

Rockwell Automation launch the Allen-Bradley PanelView Component operator interface (13/10/2008)

... MicroLogix controller, the PanelView Component operator interface incorporates on-terminal software, built-in mounting clamps and simplified file-transferring capabilities.The design of the PanelView Component operator interface makes ...

The SÖLL Vi-Go vertical cable system available from Sperian (13/10/2008)

... brackets to prevent excessive movement • Option of manual or automatic brackets • Two different mounting clamps in galvanised or stainless steel • Cable end parts including a cable thimble available for 8mm or 10mm system along ...

Iron Grip magnetic paw grabs from Magnet Sales Australia (10/10/2008)

... maneuvering of steel sheet and plate onto profile cutting beds and into guillotines.The Iron-Grip magnetic paw grab clamps firmly to the steel surface and is easily released by pushing forward the handle, which in turn activates a cam type ...

KC series of switches with tension clamps available from Australian Solenoid (7/10/2008)

... compactly designed KC series of switches with tension clamps, available from Australian Solenoid, offer large creeping distances and a maximum of safety and conveniences.Accordingly the KC series of switches is well suited as main and ...

VEK TOOLS introduce the FESTOOL multifunction table MFT 3 (22/09/2008)

... table MFT 3 comes with a wide range of practical accessories such as guide rails and mitre guides. A range of clamps is available to secure the optimal MFT extension, enabling the user to use the MFT as an extended support table for the CMS ...

Hioki 3169-21 3 phase 4 wire energy analyser from Wavecom Rentals (15/09/2008)

... Rentals offer the Hioki 3169-21 3 phase 4 wire energy analyser with 4X 9661 500A AC clamps (other optional clamps available upon request) for hire.The Hioki 3169-21 3 phase 4 wire energy analyser along with clamps is supplied with graphing ...

Switchable magnetic clamps and squares available from Magnet Sales Australia (1/09/2008)

... Sales Australia’s recently released switchable magnetic clamps or squares are suitable for clamping and welding steel components at 90° or 45°.The clamped metal pieces are held in place with the switchable magnetic clamps at the desired ...

Magswitch Ground Clamps available from Magnet Sales Australia (26/08/2008)

... Sales Australia offer a range of magswitch welder’s products including 200, 300 and 600 Amp Magsquare Ground clamps or Earth clamps.The range of Switchable Magswitch earth or ground clamp products has the ability to turn on and off with a ...

Motors, clamps and valves from Roehlen Industries (13/08/2008)

... horsepower applications. Clamp on motors are available in 1, 1.5, 2 and 2.5 models. Roehlen Industries offers V band clamps which are used to attach pumps with clamp on style mountings.Adaptor coupling units from Roehlen Industries are used to ...

Canned motor and saltwater pumps from Roehlen Industries (12/08/2008)

... water for soft drink dispensers, express coffee machines, beer cooling systems etc. Roehlen Industries also offers clamps, couplings, adapter coupling units and external bypass valves.CMP-700 is an integrated canned pump and motor package ...