Home > Asbestos Exposure

Asbestos Exposure

Queensland Laboratory is a Queensland based environmental laboratory and consulting firm specialising in flow and process engineering, occupational hygiene, asbestos, noise, odour, water and air quality, and environmental management. Offering a ...
Contact us
Asbestos removal service, licensed by worksafe, permit Epa vic, insured. Domestic and Commercial Asbestos Removal projects, Victoria wide service
Contact us
Solar Cool provide commercial roof coatings/membranes, waterproofing, heat reflective paint and deal with Asbestos Roof Repair, Asbestos Encapsulation, Asbestos Removal, Asbestos Membrane, Asbestos Paints, Asbestos Roof Membrane, Roof Repairs - in short, ...
Contact us
Contact us
Australian Exhibitions & Conferences (AEC) organise trade shows, conferences and exhibitions which include fashion, furniture, building and home improvement, materials handling, workplace safety and automotive industries. Trade Fairs ...
Contact us
Safely seal asbestos (fibro) roofs using government approved and tested system. No down time while application takes place. 10 year gaurantee. 1/5th the cost of roof removal and replacement. Australia wide installation.
Contact us
By Type
Supplier news
11/11/10 - Students at three schools in Mackay have been exposed to asbestos, reports Queensland and NSW Laboratory, prompting the Queensland State Government to announce plans to ban negligent contractors.
Supplier news
27/10/10 - Dr Ian Gardner, one of Australia's most prominent occupational and environmental medicine specialists will be speaking at The Safety Conference currently being held in Sydney.
Asbestos
Supplier news
21/09/09 - Asbestos can cause health effects if fibres are inhaled into the lungs. The body’s natural defences remove most fibres from the lungs, however some fibres can remain in the lungs.
Asbestos in soil
Supplier news
29/05/09 - Safe Environments asbestos consultants provide site inspections to assess potential asbestos in soil risks. The asbestos soil assessment is based on levels of hazard perceived by Safe Environments con
Supplier news
06/03/09 - Queensland and NSW Laboratory discuss some important rules that will aid in ensuring that house owners do not contaminate their house and areas adjacent.
Supplier news
24/02/09 - According to Safe Environments, if there is a house built in Sydney before 1990, it is probable that the house will contain some form of asbestos material. Asbestos testing can identify potential asbestos containing materials within the house. Bonded ...
Slip resistance for floor safety
Supplier news
23/02/09 - Slip resistance is a functional design issue. According to Safe Environments, ignorance of slip resistance compromises floor safety and insufficient specification, application and installation can exp
Use of sealers on floor surfaces
Supplier news
20/02/09 - According to Safe Environments, the use of sealers on floor surfaces enhances the cleaning characteristics and reduces the likelihood of staining. However, the application of sealers may affect the sl
Luminance contrast testing
Supplier news
18/02/09 - Luminance contrast testing by Safe Environments can ensure that the building complies with disabled access requirements for visually impaired people. A large proportion of people who are visually impaired can distinguish variations in colour shades. ...
Asbestos inspection to locate and assess materials suspected of containing asbestos
Supplier news
28/01/09 - Safe Environments provide three types of asbestos inspections that include location and assessment asbestos inspections (Type 1 and 2) along with demolition asbestos inspections (Type 3).
Concrete carpark
Supplier news
19/12/08 - Safe Environments was commissioned to assess slip resistance compliance of a newly constructed concrete carpark. The multi storey carpark was constructed from concrete with a steel trowel helicopter finish that was sealed.
Accelerated wear test result
Supplier news
18/12/08 - Since many building codes throughout the world require safety measures, such as floors with sufficient slip resistance, to perform not less than they were required to achieve, this has implications for the architect when specifying a floor surface. The ...

Newsletter sign-up

The latest products and news delivered to your inbox