Antennas - Page 7

Popular Antennas Sections:

Antennas News

Dialight introduces new LED lighting technology (10/11/2006)

... applications, offering tower side lights and flashing beacons for marking fences, radio and television towers, cellular antennas and other structures that present hazards to aircraft navigation.The lights are ETL certified to FAA L-810 ...

lMR low loss communications coaxial cable available (9/11/2006)

... in wireless communications systems * Short antenna feeder runs * Any application (e.g. WLL, GPS, LMR, mobil antennas) requiring an easily routed, low loss RF cable LMR coaxial cable standard is a UV resistant polyethylene ...

Broadband Site Master S810D/S820D cable and antenna analysers (9/11/2006)

... aerospace and defence radar systems, which routinely deploy cables with 15-20 dB of cable loss between transmitters and antennas, making them beyond the practical limits of existing 1-port cable loss techniques.To overcome this limitation, the ...

PCTEL- maxrad dual band, dual input sector panel antennas released (8/11/2006)

... locations where space availability is limited. High isolation design, outstanding for both bands. 68dB is typical when antennas are radially spaced and used for omnidirectional coverage (typically 3 antennas are used radially spaced, 120° ...

In Perth, NewSat has a major teleport facility.

Satellite telco rides resources boom in WA and Queensland (3/11/2006)

... the resource boom has created a 7.3 percent surge.NewSat has developed a range of specifically designed antennas and systems for remote connection and now seeks to ramp up its service to exploration companies head offices with a sales force ...

New contactless payment forms from Texas Instruments (1/11/2006)

... its ISO/ IEC 14443 chip, payment application and the industry’s smallest fully-certified RF (Radio Frequency) antennas. The postage stamp-sized inlay antenna measures 20 mm x 25 mm and the oval-shaped inlay antenna is 41 mm x 20 ...

Wireless Wizard hand-held spectrum analyser from Bantam Instruments (27/10/2006)

... GHz.The broad bandwidth covers all Wi-Fi channels and the instrument’s omni-directional 2.4 GHz and 5.0 GHz antennas are similar to those used in Wi-Fi systems. In addition, there is a further 18 channel, 4.94 GHz to 4.99 GHz public ...

EPC Gen 2 UHF silicon available from Texas Instruments (17/10/2006)

... available inlay equipment; and silicon chip on straps for label and packaging manufacturers who are printing their own antennas. TI is also offering reference antenna designs, enabling customers to develop labels and tags, which optimise its Gen 2 ...

Waterproof bulkhead connectors (10/10/2006)

... is a global manufacturer of interconnect components including RF/coaxial connectors and cable assemblies, antennas, fibre optic components, microwave components, and multipin connectors.The waterproof bulkhead connectors are exclusively ...

Practical Techniques for Measuring Interference in Next-Generation Handsets (6/10/2006)

... are not sufficient, as is always the case in handsets, then shielding must be used.• Poor isolation between antennasWhen wireless systems are co-located within a handset, coupling between antennas must be managed carefully. Meaningful ...

‘Ten times quicker’ snap-on connectors (26/09/2006)

... is a global manufacturer of interconnect components including RF/coaxial connectors and cable assemblies, antennas, fibre optic components, microwave components and multipin connectors for the automotive, telecommunication, military and aerospace ...

NEC develops new gate system to enable scanning of multiple UHF RFID tags (22/09/2006)

... collective scanning enabled by use of radio wave reflectionUnlike existing gate systems that shoot radio waves from antennas to RFID tags directly, NEC's new gate system employs a novel radio wave reflection method, whereby radio waves are ...

The new RadMan RF personal monitor by Air Met (11/09/2006)

... has been exposed to.RadManXT ELF Immune monitors are designed for use in strong ELF fields such as where wireless antennas are mounted on towers that carry high voltage 50/60 Hz utility power. The RadManXT ELF Immune monitors are similar to ...

Emerson (Johnson Components) re-introduces stainless steel SMA connectors (6/09/2006)

... requirements of MIL-PRF-39102, and operate at frequencies of up to 26.5GHz. Applications of Emerson connectors: antennas, base stations, broadcast, cable assemblies, cellular, instrumentation, microwave radio, radar, radios, RF and ...

Renesas Technology launches new tunable antenna varicap diodes (1/09/2006)

... a low voltage of around 3 V, helping to provide the low-voltage operation and wideband capability required by tunable antennas.(3) Environment-friendly lead-free, halogen-free specification (RKV653KP) The RKV653KP ...

Orbit Communications releases new RDK210 Data Radio Modem Development Kit (1/09/2006)

... comes complete with a pair of RDM210-232 Data Radio modems, two wall style plug packs, two RS232 cables, two small whip antennas and Orbit Communication’s EzTerm Data Radio modem evaluation and configuration software.A reliable Data ...

PCU300 series pump control system (29/08/2006)

... to use. The unit is designed to operate automatically, without any adjustments, tuning or setup. Omni-directional antennas enable the system to operate in any direction over several kilometres.All inputs and outputs have been designed to offer ...

Model 3115 updates appearance (28/08/2006)

... plates replace previously used green side plates. The feed connector is now the same one used on ETS-Lindgren’s other antennas. Additionally, the antenna is now being calibrated from 750 MHz to 18 GHz, instead of 1 to 18 GHz.In an advantage to ...

AirMet introduces new RadMan RF personal monitor (24/08/2006)

... been exposed to. RadManXT ELF Immune monitors are designed for use in strong ELF fields such as where wireless antennas are mounted on towers that carry high voltage 50/60 Hz utility power. The RadManXT ELF Immune monitors are similar to ...

Electro-Com supports Patties to Montague EPC/RFID Pilot Project (24/08/2006)

... are functioning. Other key learning’s gathered by the project team include: The numbers of readers and antennas required is unique to every EPC implementation, the placement of which depends on the appropriate locations to ensure ...

Texas Instruments introduces Electronic Product Code™ (EPC) Generation 2 (Gen 2) ultra-high frequency (UHF) silicon (23/08/2006)

... available inlay equipment; and silicon chip on straps for label and packaging manufacturers who are printing their own antennas. TI is also offering reference antenna designs enabling customers to develop labels and tags which optimize its ...

Data radio modem development kit (22/08/2006)

Rugged and weatherproof: the Grid Dish Gain Booster Antenna

Latest in antennas (3/08/2006)

... parabolic grid gain booster directional antennas offered by Pacific Wireless and available from Richardson ElectronicsPty Ltd utilise a unique patented parabolic grid design typical of Motorola Canopy products.The grid reflectors can be used ...

Latest in wireless voice communications (2/08/2006)

... as well as residential applications provided the system uses the DECT GAP standard.The RTX4002 has two internal antennas and can be used to double the effective range of a DECT Base Station in a desired direction.In addition, the RTX4002 ...

Loop antennas (20/07/2006)

... kit APL-130/RS manufactured by Antenna Research Associates and available from RFI Industries P/L consists of two loop antennas covering the frequency range from 1kHz to 30MHz. Both antennas are designed for the shielded room testing ...

Microwave tempering system improves yields, saves space (18/07/2006)

... Heat and Control / AMTek technology makes microwave tempering efficient, reliable and safe. Rotating antennas uniformly apply microwave energy for precise tempering control, producing a predictable product end temperature and consistent quality. ...

Enclosed yagi antenna series (18/07/2006)

... MAXRAD XtremeWave MYP Series from Richardson Electronics Pty Ltd can be used as bridge antennas between two networks or for point-to-point communications. They are field adjustable for vertical or horizontal polarisation with matched principal ...

Maxrad black optimised yagis (17/07/2006)

... have been optimised using a genetic algorithm to achieve superior performance over the 900 MHz frequency bands. These antennas feature solid 3/8" elements attached to a seamless aluminium boom with 360° welds and are finished with a black ...

Tiny surface mount GPS receiver (14/07/2006)

... fast startup times and high performance in foliage and urban canyon environments.Compatible with active or passive antennas, the Copernicus GPS receiver can be used in next- generation portable handheld, battery-powered ...

Maxrad gold anodised yagis (14/07/2006)

... Maxrad Gold Anodised Yagis MYG antennas are constructed of gold anodised 6061-T6 seamless aluminium with complete 360° welds surrounding the 3/8" solid elements and connector mounting block assemblies. The connector is gold plated to provide ...