Home > Health & Safety > Air Cooling

Air Cooling

Low Noise Air Coolers from Hydac
Hydac
Can be used in almost every industrial application, where oil and/or a water-glycol mix has to be cooled through air
View full info
Filter Systems
View full info
Hydraulic Filters
View full info
Electric wall mount radiant heating
Fanmaster
Fanmaster provide radiant heater solutions for workstations, factories and commercial areas
View full info
HVAC CHILLER-SAD-SS is designed with a side air discharge and a twin circuit for sequential starting
Summit Matsu Chillers
Designed for Australian conditions, the Tauro Series Chillers offer a range of features and benefits to suit a variety of applications.
View full info
Piston Air Compressors from Hurll Nu-Way
Hurll Nu-Way
Used for smaller applications in mining, building, metalworking and engineering, as well as for gas stations, auto repairs, laundries and dental offices.
View full info
Chillers for hospitals and medical equipment
Summit Matsu Chillers
View full info
High Volume Low Speed Fans for cooling warehouses, workshops and other high ceiling facilities
Hurll Nu-Way
It takes just a couple of hours to install it, and a dollar a day on average to run it.
View full info
Air Movers
Precision Specialty Tooling
For moving and venting air.
View full info
Chillers for mining
Summit Matsu Chillers
Summit Matsu Chillers are an Australian company that designs and manufactures chillers and demountable pump & tank stations.
View full info
Portable Air Cooler Multi Direction
Fanmaster
Fanmaster’s range of NewTech Coolers are not only keeping warehouses and factories across Australia cool.
View full info
OTB Products
OTB Products provide a range of personal and body products such as cool zone vests, cool ties, neck and wrist wraps, cooling products and cooling seat pads. OTB Products also provide personal safety products for the workplace, safety matting, safe communication ...
Contact us
Hydac
HYDAC International is a world leader in fluid technology, motion control and automation; operating in over 50 countries with more than 9,000 employees and 500 sales and service partners worldwide. HYDAC offers an extensive product range and services ...
Contact us
Beertech Industrial Environments offer Thermal Engineering Solutions and equipment for cooling of industrial control cabinets.
Contact us
Supplier of alignment benches, measuring systems, spot welding and ancillary equipment to the smash repair industry, with equipment from Car-O-Liner (Sweden) and Elektron-Bremen (Germany).
Contact us
Summit Matsu Chillers is an Australian engineering and manufacturing company which specialises in chiller systems and associated technology and maintenance. With the wealth of experience in manufacturing almost every part of refrigeration systems, the ...
Contact us
Fanmaster is an importer and manufacturer of high quality industrial cooling, industrial heaters and industrial ventilation equipment. The Fanmaster range is synonymous with quality, affordability and reliability. We are a wholly owned and run Australian ...
Contact us
Industrials, welding supplies, engineering, measuring and mechanical equipment.
Contact us
Active Air Rentals is Australia’s all round cooling, heating and power rental company. Specialising in hire and rental of temporary air conditioning, power generation, climate control and refrigeration equipment. Active Air Rentals is renowned ...
Contact us
Decode Electrical Automation are suppliers of AiRTX Compressed air products,Gluing Applicators,Switchboard Wiring, Panel wiring and provide services for Industrial Maintenance and Appliance Testing.
Contact us
OEM Dynamics Pty Limited is an Australian owned and operated Company specialising in the manufacture and supply of Mechanical Power Transmission and Heat Transfer products to the mining industry, oil and gas exploration, armed services and most public ...
Contact us
ColdMist Misting Systems effectively suppress dust and controls fumes, Odour Control, odour suppression, dust control, fume control, dust abatement, dust suppression, outdoor cooling systems, environmental cooling, fogging systems, misting systems, humidification ...
Contact us
Motium designs and manufactures computing hardware solutions for transportation, automotive and rugged environments. The product range includes: ruggedised truly sunlight readable LCD monitors with touch, ruggedised IP65 Panel PCs, fully integrated ...
Contact us
By Type
Low noise industrial fans from Morse Air Systems
Supplier news
10/03/11 - The low noise industrial fans from Morse Air Systems have a reduced environmental impact and improved efficiency.
Supplier news
19/04/10 - The Cool Breeze Rentals reverse cycle package unit air conditioners are available for rental / hire and come in sizes ranging from 11kW to 160kW.
Air conditioning at The Australian Open
Supplier news
15/03/10 - Active Air Rentals has been supplying air conditioning units and specially qualified service staff to the Australian Open for the past 10 years.
Supplier news
05/03/10 - Matsu Chilling Systems have recently supplied a reliable chiller plant to well known Gold Coast marine mammal park, Sea World.
Supplier news
03/03/10 - Summit Matsu Chillers has provided a reliable chiller unit solution for Grove Fruit Juice, supplying the company with two air cooled chiller units that are used for process cooling at several stages o
Global Fodder's Climate Controlled Fodder
Supplier news
01/03/10 - Summit Matsu Chillers was selected to design and manufacture process cooling systems to fit within the Global Fodder's Excel Module Shipping Containers.
Supplier news
24/02/10 - Bob White Electrix called upon Summit Matsu Chillers (Summit Matsu) to provide them with the 240 volt air cooled chiller unit which they use in their welding process.
Supplier news
07/10/09 - Cognis Australia’s Hutt Lagoon Site located near Port Gregory, 600km North of Perth is considered to be the largest algae farm in the world. Located in the middle of approximately 3000 hectares of sal
Supplier news
21/07/09 - Creating innovative solutions that reduce energy consumption is something that Australian company Summit Matsu Chilling Systems considers key to its company’s success.
Supplier news
21/07/09 - There are five main reasons that preventative maintenance makes sense for every business that uses a chiller.
Supplier news
21/07/09 - Installing a chiller has the potential to save hospitals tens of thousands of litres of water usage per year in the sterilisation process.
Supplier news
06/07/09 - Summit Matsu Chilling Systems have supplied the Dreamworld Resort on the Gold Coast with the chiller needed to run their newest attraction, the Mick Doohan Motocoaster.
HY-FLUSH 1300
The HY-FLUSH 1300 is used to clean hydraulic systems. It is very important to flush any new or repaired hydraulic system before conducting the commissioning and final handover of the system to the operator.
Hydac
Flexmicron
This video shows how to replace a Flexmicron filter element on the MultiRheo filter housing. You will be able to see how easy is to replace the element and the advantages of using our Flexmicron.
Hydac
HYDAC HMG 4000
The HYDAC HMG 4000 is a valuable tool used in the service and diagnostics of both mobile and industrial machines. It is used for the collection, display, analysis, storage and transfer of data from sensors. In this video, we show how to update the HMG ...
Hydac
Dimicron filter element
This video shows how to replace a Dimicron filter element on the OLF filter housing. You will be able to see how easy is to replace or install the element and the advantages of using our Dimicron.
Hydac
install an AC-LN Low Noise Air Cooler
In this video, we show the correct way to install an AC-LN Low Noise Air Cooler, the air and the fluid side of the cooler.
Hydac
How to use a Varnish Elimination Unit
The HYDAC Varnish Elimination Unit VEU-F-AU is a unique and innovative system. It is primarily used for the conditioning and refurbishment of mineral oils where heat and operating conditions can damage the oil, forming varnish which can contaminate the ...
Hydac
How to Charge HYDAC Hydro-pneumatic Diaphragm Accumulators
Hydro-pneumatic accumulators need to be pre-charged with an inert gas in order to work at all. Selection of the correct gas pressure is vital, as it defines the stored hydraulic fluid volume and pressure, which are important for the safe and correct ...
Hydac
HYDAC HMG 4000 Remote diagnostics
Testing of pumps is made safe with the application of remote diagnostics applied in joint collaboration by HYDAC, Custom Fluid Power and Glencore Clermont Mine.
Hydac
How to Assemble a Hydraulic Bladder Accumulator
Hydro-pneumatic accumulators are pressure vessels designed and built to store fluids under pressure. They are charged with nitrogen which is separated from the fluid section by a piston, bladder or diaphragm.
Hydac
How to use a MPC field test kit
When hydraulic and lubricating oils age and oxidise, the colour of the oil will change. This is due to the build-up of damaged and degraded elements in the oil. In Group 2 and 3 oils, varnish forms, this is a sign of oil degradation.
Hydac
How to easily setup a Preventative Maintenance 4.0 Oil Condi
At HYDAC, all our 4.0 ready hydraulic systems are fitted with our latest sensor technology that is in-line with Industry 4.0 to create smart machines that are able to self-monitor, self-learn and self-correct.
Hydac
How to Charge HYDAC Hydro-pneumatic Bladder Accumulator
How to Charge HYDAC Hydro-pneumatic Bladder Accumulator
Hydac

Newsletter sign-up

The latest products and news delivered to your inbox