Adapter - Page 3

Popular Adapter Sections:

Adapter News

Seal Pack glue modules available from Sealing Solutions (30/03/2009)

... and the ongoing need for spares. They can also be used with most existing hot melt heads. Changing the nozzle adapter seat will enable variation between the twirl or spray patterns.Specialist tools and techniques are not required ...

PIONEER Computers Australia release DreamBook Tablet T102 (26/03/2009)

... (D) x 38.5mm (H), With 6 Cell battery: 265mm (W) x 214mm (D) x 41.4mm (H) Weight - ~1.300g (with 4-cells battery) AC adapter - 12V DC, 3A, 36W output, 100~240V AC, 50/60Hz ...

PIONEER Computers Australia release DreamVision X5 LCD PC (25/03/2009)

... and materials of the DreamVision X5 LCD PC meet the standards of RoHs. Packaged with Energy Star 5.0 qualified power adapter, it draws 30 watts of power. The I.C.E heat pipe inside dissipates heat away and keeps the system cool with low noise. The ...

Keil µVision4 IDE available from Embedded Logic Solutions (9/03/2009)

... Atmel SAM7/9, and new 8051 derivatives such as Infineon XC88x and SiLABS 8051Fxx Supports interfaces for many debug adapter interfaces including ADI miDAS Link, Atmel SAM-ICE, Infineon DAS, and ...

HSP and HSW handling modules for pick and place applications available from Festo (6/03/2009)

... of the linear stroke in each end position. Easy adaptation to grippers and semi-rotary drives is possible using existing adapter plates. The HSP and HSW handling modules can be integrated directly into the application as a pick and place solution ...

HWA, HWB and HWX series of rotary joints available from Novasys Group (4/03/2009)

... piece with right-hand or left-hand male thread BSP (ISO 228) Sealing and centring cone at the end of thread Adapter pieces for NPT and other threads are available K flange with conical inner ring or quick disconnectRadial and axial ...

MEN Mikro Elektronik ESMexpress module XM2 available from Dominion Electronics (4/03/2009)

... format can be used. The XM2 can also be plugged onto COM Express carrier boards (basic form factor type 2) through the adapter board AE12.The XM2 is specified for an operating temperature of 0°C to +60°C with conduction or convection cooling. ...

Atmel Corporation’s AT91SAM software package v1.5 available from Embedded Logic Solutions (2/03/2009)

... offer a range of evaluation boards that provide a JTAG interface which connects to the Keil ULINK or the Atmel SAM-ICE adapter. These combined with the µVision debugger provide a comprehensive test environment for embedded ...

Dataforth model SLX718 stand alone data acquisition/logger available from Scientific Devices Aust (17/02/2009)

... All metal enclosure Three package options: Benchtop, NEMA & OEM pcb board Powered from any 9-36VDC source AC adapter provided with Benchtop enclosure Benefits: Allows direct measurement of virtually any industrial signal ...

The Xeva-FPA-1.7 industrial infrared camera

Xeva-FPA-1.7 industrial infrared camera available from Adept Electronic Solutions (16/02/2009)

... Built-in temperature controller Highly stable operating temperature Compact configuration Simple operation Adapter for C-mount optical lenses Frontplate for spectrometer fixation Stand-alone operation Windows 2000 / XP compatible ...

Newport wiSeries 1/8 DIN panel meter and controller available from AMS Instrumentation and Calibration (11/02/2009)

... for a variety of applications. Depending on application, the wireless sensors are powered by batteries or an external AC adapter that operates on any voltage from 100 to 240V AC. Wireless transmitters are available with external probes appropriate ...

Schmalz vacuum clamping systems available from Millsom Materials Handling (10/02/2009)

... are available in new sizes, permitting retrofitting on all machines made by major Italian companies.In addition, the adapter plates can be used to extend the clamping range as far as the end stops, permitting narrow and curved workpieces to be ...

BoltSafe Sensor CMS available from AMS Instrumentation and Calibration (10/02/2009)

... read one by one using the handheld instrument SM-200 BoltSafe Reader, or directly from a PC through the CM-1000 Network Adapter, or directly from a PDI-NT. The PDI-NT provides different output signals.BoltSafe Sensors CMS have a cable ...

Mini-M70LF spray nozzle available from Spray Nozzle Engineering (5/02/2009)

... features a heavy-duty replaceable cover and a long handle design that allows it to be held with one hand.A swivel adapter in ½” or ¾” size is included with the Mini-M70LF spray nozzle and a repair kit is also ...

Mentor’s LED testers available from Erntec (3/02/2009)

... is useful for checking characteristics such as colour, angle and intensity of the light. It can be operated with a power adapter or batteries, which provide flexibility and mobility. There is a 'low' warning for operation with batteries.The ...

MH201 dual spindles, MH301 and MH311 triple spindles and MH421 quad spindles available from Suhner (Australia) (3/02/2009)

... (Australia) multi-spindle heads come with a mounting flange. This means that with the use of a simple adapter, they can be easily installed on drilling units including press drills, electric motors or one of Suhner (Australia) electric/pneumatic ...

The air compressor and garage air tool pack

Air compressor and garage air tool pack available from Darwin Bolt Supplies (29/01/2009)

... a 1/2 “ drive impact wrench, a 3/8” ratchet wrench, 10 metric sockets, 2 quick connectors, 3” extension, 3/8” to 1/2 “ adapter and air tool oil.The air tool kit comes in a high impact injection moulded case to prolong tool life and allow easy ...

8500 series programmable DC electronic loads available from Unispan Instruments (23/01/2009)

... installation CD with application software and TTL-to-RS-232 serial converter. Optional rack mount kit and USB-to-serial adapter are also ...

Jumbo vacuum lifter with multi-gripper available from Millsom Materials Handling (6/01/2009)

... lifter has themaximum unit capacity up to 65 kg. In the Jumbo vacuum lifter with multi-gripper, a quick-change adapter to change gripping heads for other products is available as an option.Technical data: Weight of the gripper (without ...

FireFly-BP serial adapter with AAA battery support available from Soanar - Electronic Component & Supply Chain Solutions (22/12/2008)

... Zealand by Soanar - Electronic Component & Supply Chain Solutions, have released battery powered serial to Bluetooth adapter, FireFly-BP. FireFly-BP adds AAA battery support to the FireFly serial adapter, the Class 1 Bluetooth serial ...

DrägerSensor IR available from Draeger Safety Pacific (10/12/2008)

... and reduced maintenance efforts Opportunity for reduction of total cost of ownership Splash guard and calibration adapter are included in the ...

DIN-Rail adapter available from Diamond Australia (9/12/2008)

... DIN-Rail adapter, available from Diamond Australia, permits a simple and safe installation of an E-2000 duplex mating adapter directly onto a 35 mm DIN-Rail in various wall boxes and cabinets.The DIN-Rail adapter allows for an easy and fast ...

FN7080 Gear Stick load cell available from Bestech Australia (8/12/2008)

... the force required to make a gear change. The force is measured in either two or three directions (X, Y, Z).An adapter coupled with an interface collar allows a simple and rapid fitting of the FN7080 Gear Stick load cell to the majority of ...

2” B-EP2DL and the 4” B-EP4DL portable label printers

Portable label printers from TOSHIBA TEC Australia (5/12/2008)

... minimum. It has an internal fast charge circuit so that the printer can be quickly recharged on the move. Optional power adapters include an AC adapter, 48V input DC adapter, 12V vehicle cigarette lighter adapter (only for the B-EP2DL portable ...

Extreme series 4mm Videoscopes available from INLINE Systems (5/12/2008)

... FAT16 File formats: BMP or TIFF Capacity: Up to 500 images The iCapture Smart is powered by a 100 to 240V AC adapter with a stabilised 9 to12V DC ...

F216 - 3U CompactPCI Octal UART I/O Board available from Dominion Electronics (28/11/2008)

... CompactPCI Octal UART I/O board has its own 500V isolation, with all ports available on one 78-pin D-Sub connector. An adapter cable is also available to spread the 78-pin connector to eight standard 9-pin D-Sub connectors.The F216 3U ...

The MCBSTM32E Evaluation Board and Starter Kit from Embedded Logic Solutions (24/11/2008)

... and debug applications on a Cortex-M3 microcontroller: The MCBSTM32E Evaluation Board The ULINK-ME USB-JTAG Adapter and Microcontroller Development Kit (MDK) evaluation versionThe Microcontroller Development Kit (MDK) features ...

Open-chute and lift-and-seal drum dumper models available from Flexicon Corporation (21/11/2008)

... hopper, eliminating the need for connecting sleeves and clamps.Optional hopper with Flexicon flexible screw conveyor adapter is also available with universal flanged outlet or Flexicon pneumatic pick-up adapter.Flexicon Corporation open ...

Rapid Flash Point Tester available from Particle Test (20/11/2008)

... control with °C/°F selector switch, syringe, electronic timer, integral NIST traceable thermometer, and an external hose adapter valve for connection to a customer-supplied fuel cylinder or other fuel source.The Rapid Flash Point tester has ...

ISN T8-Cat 6 impedance stabilisation network

Teseq’s Impedance Stabilisation Network for Cat 6 cable connected devices available from Westek Electronics (20/11/2008)

... Ethernet (PoE) and immunity tests of office, telecom and networking equipment according to IEC 61000-4-6.Calibration adapter sets (CAS) are available for Teseq’s family of ISNs and an extension of the CAS ISN adapter set is available for the ...