Home > Actuators And Positioners

Actuators And Positioners

AS-R and AS-Q series from SMC
SMC Australia New Zealand
AS-R and AS-Q series from SMC
View full info
Simple operation with easy speed control and torque limiter
Acrodyne
Safe, compact, reliable and efficient portable actuators for actuating valves in the field.
View full info
HR ETH ATEX
Motion Solutions Australia
The ETH ATEX has the capability to deliver axial thrust forces up to 56kN, in strokes up to 2000mm and repeatability up to ±0.03 mm
View full info
Powered by single-phase or direct current supplies
Rotork Australia
​Rotork offers a premium range of process control actuators that work to control flow, pressure and motion control in a broad range of applications.
View full info
EX600 fieldbus system from SMC
SMC Australia New Zealand
EX600 Serial Interface Unit from SMC
View full info
Compact, high precision actuators from Jortec
Jortec Engineering
Concens actuators from Jortec provide high precision in the control of movements as well as reliability. Concens actuators small dimensions and compact design means they can be integrated into a number of environments where other actuators can’t.
View full info
Cross section of an Air Spring, simple design, no maintenance and easy to use
Air Springs Supply
Pneumatic actuators, positioners and conveyor accessories are economical, dependable, reliable cycling power and no maintenance required.
View full info
Heavy duty actuators for harsh and demanding conditions
LINAK Australia
TECHLINE linear actuator systems from LINAK Australia are built to last in the most rugged and rough conditions
View full info
ZP3P from SMC
SMC Australia New Zealand
SMC’s highly adaptable blue silicone rubber vacuum pad
View full info
Motion Control Drives from Sumitomo Drive Technologies
Sumitomo Drive Technologies
Motion Control Drives from Sumitomo are available with inputs to suit most major servo motor manufacturers.
View full info
CGB Precision Products
CGB Precision Products is a specialist supplier of super precision ball bearings and related components. They are the Australian representatives for top brands such as Barden, FAG, Kaydon & Gamet, Kamatics, Heim, FLURO, PIC Design and Greene Tweed - ...
Contact us
Hydac
HYDAC International is a world leader in fluid technology, motion control and automation; operating in over 50 countries with more than 9,000 employees and 500 sales and service partners worldwide. HYDAC offers an extensive product range and services ...
Contact us
Bestech Australia
Bestech Australia provides the latest in measurement and control technology to the Australian and NZ market. Bestech Australia are focused to meet the instrumentation needs of customers in: Research and Education, Automotive, Metal Industry, ...
Contact us
Treotham
Drag chain - cable/energy chain, flexible conduit, nylon conduit, multipin connectors industrial type from 10A-35A. Treotham offers a number of products including the Igus Energy Chain Systems.
Contact us
T.E.A. Transmissions
T.E.A. Transmissions supplies mechanical engineering, power transmission and linear motion components. Proudly Australian owned and established in 1986, T.E.A. Transmissions strives to bring you the best solutions to your engineering problems. They have ...
Contact us
Hylec Controls
Hylec Controls specialise in material, dynamic and multi channel testing equipment, servo-actuators and systems, electric and hydraulic shakers, package testing, environmental chambers and production leak testing.
Contact us
Koloona Industries are suppliers of Electrical and Electronic Components including Connectors and Accessories, Control Technology, Differential Pressure Switches, Pressure Vacuum, Protection Devices, Security, Sensor Technology and Switching.
Contact us
Cylinders, electrical controls, valves, air service units, fittings, tubing.
Contact us
SMC are the world leaders in pneumatic technology and are experts in automation control. Formed in Japan in 1959, the company now offers over 12,000 basic products with 700,000 variants. The company employs over 22 000 people worldwide and is situated ...
Contact us
NeuForce Pneumatics specialise in importing, distributing and selling fluid transfer components. Products include stainlee steel and nickel plated brass push in fittings, anto microbial fittings and tubing, valves, cylinders and air preparation equipment, ...
Contact us
Locally owned and operated in Perth Western Australia, Hydair Drives has been a leader in providing Hydraulic and Pneumatic Power Solutions to a large range of industries for over 40 years.
Contact us
Filquip Pty Limited is an Australian company specialising in supplying equipment and filtration media for powder and granular materials handling and filtration in the water treatment, concrete batching, mining, manufacturing and food industries throughout ...
Contact us
By Type
LINAK actuators provide a very precise positioning and feedback system for balers
Supplier news
17/06/17 - TECHLINE actuator systems from actuation solutions specialist LINAK Australia can be easily integrated with the control system of balers.
SAE J1939 CAN bus control
Supplier news
06/06/17 - LINAK Australia has introduced the new SAE J1939 CAN bus control for LA36 actuators as an all-in-one package solution.
Ergonomic design can increase motivation and satisfaction and ultimately result in better performance and higher productivity
Supplier news
28/05/17 - LINAK Australia explains the importance of ergonomics in a production line.
Regardless of any variations in load, the actuators stay precisely aligned when moving
Supplier news
08/05/17 - LINAK Australia presents an IC parallel actuator solution that allows the user to drive up to eight actuators in parallel with precise movement.
Actuator with integrated controller
Supplier news
30/04/17 - The IC Basic from LINAK Australia is a straightforward actuator solution that comes pre-configured to meet the application’s exact requirements.
LINAK offers greater possibilities with IC and BUS communication
Supplier news
27/04/17 - LINAK’s actuators with integrated controllers allow for easy control and precise positioning.
LA36 actuators have been integrated into the new DEUTZ-FAHR tractor hoods to assist with opening and closing
Supplier news
20/04/17 - LA36 actuators from LINAK have been integrated into the new DEUTZ-FAHR tractor hoods to assist with opening and closing.
Futek load cell in an exoskeleton application
Supplier news
06/04/17 - Futek load cells were installed in actuators within powered exoskeletons to measure the torque applied by the actuator.
Top 10 industrial semiconductor suppliers of 2014
Editorial
22/05/15 - IHS Technology Inc. reports that global industrial semiconductor revenues grew by 18 percent year over year in 2014.
The CMA actuator can be specified with increased functionality encompassing local controls, LCD positional display and programmable fail-to-position performance
Supplier news
19/03/15 - Rotork Australia presents a new range of CMA actuators designed to perform in numerous process control valve, metering pump and damper applications.
Benedetto Vigna at the award ceremony in Grenoble
Supplier news
16/03/15 - STMicroelectronics announces that Benedetto Vigna, Executive Vice President Analog, MEMS, and Sensors Group, has been awarded the Frederik Philips Award.
A broad variety of commercial and industrial plant can be mounted on Firestone Airmount isolators
Supplier news
09/03/15 - Noise, vibration and harshness issues in buildings need to be resolved at their source to ensure a lasting solution, according to Air Springs Supply.
HY-FLUSH 1300
The HY-FLUSH 1300 is used to clean hydraulic systems. It is very important to flush any new or repaired hydraulic system before conducting the commissioning and final handover of the system to the operator.
Hydac
Flexmicron
This video shows how to replace a Flexmicron filter element on the MultiRheo filter housing. You will be able to see how easy is to replace the element and the advantages of using our Flexmicron.
Hydac
HYDAC HMG 4000
The HYDAC HMG 4000 is a valuable tool used in the service and diagnostics of both mobile and industrial machines. It is used for the collection, display, analysis, storage and transfer of data from sensors. In this video, we show how to update the HMG ...
Hydac
Dimicron filter element
This video shows how to replace a Dimicron filter element on the OLF filter housing. You will be able to see how easy is to replace or install the element and the advantages of using our Dimicron.
Hydac
install an AC-LN Low Noise Air Cooler
In this video, we show the correct way to install an AC-LN Low Noise Air Cooler, the air and the fluid side of the cooler.
Hydac
How to use a Varnish Elimination Unit
The HYDAC Varnish Elimination Unit VEU-F-AU is a unique and innovative system. It is primarily used for the conditioning and refurbishment of mineral oils where heat and operating conditions can damage the oil, forming varnish which can contaminate the ...
Hydac
How to Charge HYDAC Hydro-pneumatic Diaphragm Accumulators
Hydro-pneumatic accumulators need to be pre-charged with an inert gas in order to work at all. Selection of the correct gas pressure is vital, as it defines the stored hydraulic fluid volume and pressure, which are important for the safe and correct ...
Hydac
How to use a MPC field test kit
When hydraulic and lubricating oils age and oxidise, the colour of the oil will change. This is due to the build-up of damaged and degraded elements in the oil. In Group 2 and 3 oils, varnish forms, this is a sign of oil degradation.
Hydac
How to easily setup a Preventative Maintenance 4.0 Oil Condi
At HYDAC, all our 4.0 ready hydraulic systems are fitted with our latest sensor technology that is in-line with Industry 4.0 to create smart machines that are able to self-monitor, self-learn and self-correct.
Hydac
HYDAC HMG 4000 Remote diagnostics
Testing of pumps is made safe with the application of remote diagnostics applied in joint collaboration by HYDAC, Custom Fluid Power and Glencore Clermont Mine.
Hydac
How to Assemble a Hydraulic Bladder Accumulator
Hydro-pneumatic accumulators are pressure vessels designed and built to store fluids under pressure. They are charged with nitrogen which is separated from the fluid section by a piston, bladder or diaphragm.
Hydac
 Heavy Duty Screw Jack Systems Australia - ZIMM
The ZIMM Screw Jack range is a modular system of components that can be combined to deliver you a complete lifting and handling solution.
T.E.A. Transmissions

Newsletter sign-up

The latest products and news delivered to your inbox