World’s First Oscilloscope with Built In Spectrum Analyser from TekMark Australia


Contact supplier

Your Email * indicates mandatory fields.
With TekMark's MDO4000 Mixed Domain Oscilloscope Series, users can capture time-correlated analog, digital and RF signals for a complete system view of your device. Users will also be able to see both the time and frequency domain with one single instrument.

Solve the most complicated design issues, quickly and efficiently
  • View the RF spectrum at any time to see how it changes with time or device state
  • Accurately analyse RF signals
  • Investigate how RF spectrum is changing over time
  • Advanced RF power triggers that allow users to quickly capture specific RF events 
  • Automated trigger, decode and search allows serial and parallel bus triggering and analysis
Key performance specifications
  • 4 Analog Channelso - 500 MHz or 1 GHz Bandwidth Models
  • 16 Digital Channelso - MagniVu™ High-speed Acquisition provides 60.6 ps Fine Timing Resolution
  • 1 RF Channelo 50 kHz - 3 GHz or 50 kHz - 6 GHz Frequency Range Models; Ultra-wide Capture Bandwidth ≥1 GHz
  • Standard Passive Voltage Probes 3.9 pF Capacitive Loading and 500 MHz or 1 GHz Analog Bandwidth
Mixed Domain Analysis
  • Time-correlated Analog, Digital, and RF Signal Acquisitions in a Single Instrument
  • Wave Inspector® Controls provide Easy Navigation of Time-correlated Data from both the Time and Frequency Domains
  • Amplitude, Frequency, and Phase vs. Time Waveforms derived from RF Input
  • Selectable Spectrum Time to Discover and Analyse how RF Spectrum Changes over Time – Even on a Stopped Acquisition
Spectral Analysis
  • Dedicated Front-panel Controls for Commonly Performed Tasks
  • Automated Peak Markers Identify Frequency and Amplitude of Spectrum Peaks
  • Manual Markers enable Non-peak Measurements
  • Trace Types Include: Normal, Average, Max Hold, and Min Hold
  • Detection Types Include: +Peak, –Peak, Average, and Sample
  • Spectrogram Display enables Easy Observation and Insight into Slowly Changing RF Phenomena
  • Automated Measurements Include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
  • Trigger on RF Power Level
  • Triggered or Free Run Spectral Analysis
Ease of Use Features
  • 10.4 in. (264 mm) Bright XGA Color Display
  • Small Footprint and Lightweight – Only 5.8 in. (147 mm) Deep and 11 lb. (5 kg)
  • Two USB 2.0 Host Ports on the Front Panel and Two on the Rear Panel for Quick and Easy Data Storage, Printing, and Connecting a USB Keyboard
  • USB 2.0 Device Port on Rear Panel for Easy Connection to a PC or Direct Printing to a PictBridge®-compatible Printer
  • Integrated 10/100/1000BASE-T Ethernet Port for Network Connection and Video Out Port to Export the Oscilloscope Display to a Monitor or Projector
Optional Serial Triggering and Analysis
Serial Protocol Trigger, Decode, and Search for I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM

Optional Application Support
  • Advanced RF Triggering
  • Power Analysis
  • Limit and Mask Testing
  • HDTV and Custom Video Analysis
The MDO4000 Mixed Domain Oscilloscope Series will transform the way you test and allow you to solve complicated design issues quickly and efficiently.
TekMark Australia information and contact details


Related TekMark Australia News

Supplier news
11/12/13 - TekMark Australia announces the release of a new range of mixed signal oscilloscopes from Tektronix.
Supplier news
07/11/13 - GW Instek introduces a brand new application for GDS-2000A digital oscilloscopes in the automobile industry – the CAN/LIN bus measurement solution.
Supplier news
01/11/13 - TekMark Australia announces that the MeasureStat application program of GDS-3000 digital oscilloscopes can be directly downloaded from the GW Instek website.
Supplier news
06/05/13 - TekMark Australia announces the release of a new range of digital oscilloscopes from GW Instek.
Supplier news
06/06/12 - TekMark Australia has recently supplied 251 Tektronix 500MHz digital phosphor oscilloscopes to the Australian Defence Force
View all TekMark Australia news

Contact TekMark Australia

(Head office) Update these details
address map
Suite 302, Level 3
18-20 Orion Rd
Lane Cove
NSW 2066
Tel: 1300 811 355
Fax: 02 9418 8485

Contact TekMark Australia

Your Email * indicates mandatory fields.

Newsletter sign-up

The latest products and news delivered to your inbox