Leak Detection Equipment and Testers from Technical and Scientific Equipment

logo

Contact supplier

Your Email * indicates mandatory fields.
image
The choice of which leak tester to use for any application is notoriously difficult. Technical and Scientific Equipment has more than 35 years of experience in leak testers, and is able to advise on the best test method for each application.
 
Technical and Scientific Equipment is able to offer the widest range of leak test methods, and as a result they can offer objective and independent advice on the most appropriate leak test for your requirements. 

The most experienced team in leak testers
  • The most experienced team with expertise in leak testing can advise on the best method
  • Able to offer the widest range of techniques for each application
  • Furness Controls flat diaphragm technology pressure decay leak testers give maximum sensitivity down to the lowest levels
  • Sensistor hydrogen leak detectors enable low cost tracer gas methods, as well as leak tracing capabilities
  • Sealtick package integrity testers allow routine testing in the food, pharmaceutical and medical industries
Pressure decay and vacuum decay leak tests are long established, and widely used for applications where the parts are not too hot or too cold, the volume is not too large, and the sensitivity is similar to watertight or fuel tight.

It is well suited to high volume testing, and Technical and Scientific Equipment can integrate the leak tester into an automated or semi automated station. Furness Controls range is recognised as a leader in the technology, with a unique flat diaphragm sensing element which gives the highest possible sensitivity and range.

Gas leak detectors
  • Tracer gas leak detection is potentially much more sensitive, and well suited to larger volume parts and the highest sensitivity
  • Works well for locating leaks after pressure decay testing
  • Either hydrogen or helium can be used as a tracer, with hydrogen leak tests being cheaper and easier to perform
For the ultimate sensitivity, helium must be used in a vacuum enclosure. Sensistor has made major advances in recent times with the technology of hydrogen leak detection.

Leak testing equipment
For leak testing of flexible packaging Technical and Scientific Equipment has developed a unique range of Sealtick testers. Again, the specific shape and size of the package, the size of leak to be detected, and the number of tests to be made, make a big difference to the optimum method.

Online leak tests require further refinements to determine the most economical method, and integrate with automation of the production line.

Leak testing tools for a range of applications

Technical and Scientific Equipment water leak detectors are suitable for a range of applications, including:
  • Water leak detection
  • Pressure decay
  • Flow rate
  • Vacuum decay
  • Tracer gas using nitrogen or helium
  • Special leak test techniques for flexible packaging
With extensive experience in this field, Technical and Scientific Equipment are able to offer expert advice and support.
Technical and Scientific Equipment Co information and contact details

Downloads

Related Technical and Scientific Equipment Co News

Supplier news
20/06/12 - Technical and Scientific Equipment Co now stocks FCO750 multifunction leak detectors, which are ideal for applications that require multiple test configurations.
Supplier news
09/11/10 - TSE 2032 underwater vacuum leak testers are now available from Technical and Scientific Equipment Co, and use a transparent acrylic case to allow packs to be viewed while vacuum testing is performed.
Supplier news
05/11/10 - Available from Technical and Scientific Equipment Co, Sealtick 6086 manual bag leak testers use a vacuum method to measure the gas leaking for numerous flexible pack types and sizes.
Supplier news
26/07/10 - Technical and Scientific Equipment (TSE) has developed a new leak detection system for metal cans in addition to its testing system for flexible packages and underwater leak testing system.
Supplier news
23/02/10 - Technical and Scientific Equipment (TSE) is proud to present a new range of large horizontal servo control hydraulic tensile testing machines, from TE.
View all Technical and Scientific Equipment Co news

Contact Technical and Scientific Equipment Co

(Head office) Update these details
address map
Unit 14, 44 Garden Bvd
Dingley
VIC 3168
Tel: 03 9540 5100
Fax: 03 9551 5541

Contact Technical and Scientific Equipment Co

Your Email * indicates mandatory fields.
image

Newsletter sign-up

The latest products and news delivered to your inbox