Belden’s BWAP-200 Access Points (NP 239) are the point- of-network-entry for users of the Belden wireless solution.
Elegant in their simplicity, these APs provide a true plug-and-play architecture for implementing large-scale, enterprise-grade WLANs.
They are powered from industry-standard PoE (Power over Ethernet – IEEE 802.3af) and they support any off-the-shelf wireless network interface card (NIC).
Belden APs, combined with Belden BWS-8008 and BWS-8024 switches, embody the Belden wireless solution.
Using Belden’s “Channel Blanket Technology,” this wireless LAN provides seamless mobility with no roaming latency, no co-channel interference and the ability to design for a guaranteed and predictable level of service.
Belden’s APs require no set-up or configuration. These system components are just radios with no software, no storage, no “smarts.” All traffic decisions are made by the centralised 8- or 24-port Belden switch.
Belden’s BWAP-200 Access Points available from Wired & Wireless Solutions International are client agnostic; clients do not associate with any access point. Instead, the APs act as a conduit to rapidly funnel all traffic between switch and client.
The net effect is ubiquitous, interference-free coverage, consistent bandwidth, and zero-latency mobility, all with the resilience of a wired connection.
In the Belden wireless solution, when adds, drops and changes occur, simply add or remove APs as needed. No network re-configuration or re-planning is needed.
Adding or removing an AP has is needed. Adding or removing an AP has no effect on an existing set-up.