Product News

Westek Electronics
Unit 2/6-10 Maria St
Laverton North VIC 3026
Tel: 03 9369 8802
Fax: 03 9369 8006

Supplier´s Website
Enquire now

Incorrect details?
Enquire NowVisit Website

Westek Electronics provides Helmholz magnetic field coils for EMC applications



Helmholz magnetic field coils
The new Schwartzbeck model HHS 5204-36 Helmholtz-coils are especially designed to generate precisely defined magnetic fields from DC to the upper end of the audio frequency range and beyond to 500 kHz. The generated fields are in a strongly linear relation to the coil current.

The field strength can be calculated exactly by analytical (or numerical) methods, based on the coil’s geometry, the number of turns and the coil current. Therefore the HHS 5204-36 is ideally suited for the calibration of magnetic field probes or sensors.

Due to the use of high temperature proof Teflon wire it is possible to generate magnetic fields up to approx. 3000 A/m for short times. Typical applications are magnetic immunity testing according to automotive standards or MIL STD 461.

More information on Helmholz magnetic field coils is available from Westek Electronics.

6-Nov-2007

Contact Westek Electronics

Name:
Company Name:
Contact Number:
Email Address:
Your State:
Your Message:

Please uncheck this box if you don't want to receive the latest product updates in Ferret Daily Product News, Ferret's daily eNewsletter.

does not match
 
Your contact details will be passed onto this company ( see our Privacy Policy )
More Articles

Westek Electronics News


CDN devices for immunity testing Teseq’s CDN devices for immunity testing available from Westek Electronics (25-Nov-2008)
Teseq’s comprehensive range of CDN (Coupling/Decoupling Network) devices, used to permit conducted immunity testing in accordance with IEC/EN 61000-4-6, is available from Westek Electronics.

Schaffner FN 9244 IEC inlet filters, designed to conduct noise insertion loss The new Schaffner FN 9244 series IEC inlet filters, from Westek Electronics (21-Nov-2008)
The Schaffner FN 9244 series IEC inlet filters have conducted noise insertion loss for both asymmetrical (common mode) and symmetrical (differential) components.

ISN T8-Cat 6 impedance stabilisation network Teseq’s Impedance Stabilisation Network for Cat 6 cable connected devices available from Westek Electronics (20-Nov-2008)
Teseq, formerly Schaffner Test Systems, have introduced a new impedance stabilisation network (ISN) that is compatible with the highest speed class of Ethernet / Category 6 cables.

Schaffner EMI Three-phase Filter available from Westek Electronics (19-Nov-2008)
The Schaffner EMI Three-phase Filter, from Westek Electronics, can fully utilise a three-conductor topology and is well suited to three-phase power drive applications.

Schaffner EMI and EMC Filters available from Westek Electronics (18-Nov-2008)
Schaffner EMI and EMC Filters for Power Inlets and PCB Mounting are available from Westek Electronics.

News Sign up View all  |  RSS Feed

Related Articles

Galil Motion Control’s New Ladder Interface Software available from Motion Solutions Australia Galil Motion Control’s New Ladder Interface Software available from Motion Solutions Australia (12-Nov-2008)
Galil Motion Control’s new Ladder Interface Software is available from Motion Solutions Australia for converting Relay Ladder Logic programs into optimised, deterministic code for their compact RIO-471x0 programmable logic controller (PLC).

GE range of contactors and overloads from IPD Industrial Products GE range of contactors and overloads from IPD Industrial Products (15-Oct-2008)
The extensive range of GE contactors and overloads from IPD Industrial Products are available in 3 pole AC3 2.2 to 450kW (6-825A) or 4 pole 4N/O AC-1 20A to 1250A.

Single phase standard motors from Electric Motor & Transmission Single phase standard motors from Electric Motor & Transmission (13-Oct-2008)
Single phase standard motors, available from Electric Motor & Transmission, are designed, manufactured and tested to comply with IEC, International and Australian standards.

Coil turnover machines available from Global Tools & Machines Coil turnover machines available from Global Tools & Machines (7-Oct-2008)
Global Tools & Machines provide coil turnover machines. The coil turnover machines protect the coils and improve the operator safety.

Alicat Mass Flow Controllers from Duff & MacIntosh Alicat Mass Flow Controllers from Duff & MacIntosh (8-Aug-2008)
Alicat Scientific has recently announced its intention to begin working in the semiconductor space by introducing its line of low flow (0.5SCCM - 50SCCM) Alicat Mass Flow Controllers to the semiconductor manufacturing industry. Alicat Mass Flow Controllers are available from Duff & MacIntosh.

Access over 2000 Manufacturing and Operations jobs online!