Product News

Westek Electronics
Unit 2/6-10 Maria St
Laverton North VIC 3026
Tel: 03 9369 8802
Fax: 03 9369 8006

Supplier´s Website
Enquire now

Incorrect details?
Enquire NowVisit Website

Westek Electronics introduces FN 9233 IEC inlet filters



FN 9233 IEC filters
The new Schaffner FN 9233 IEC filters from Westek Electronics provide a rapid solution for attaining effective EMC compliance utilising a small form factor component.

The filters are suitable for 250 volts single-phase operation and for line current ratings ranging from 1 amp to 15 amps. There are two versions available: one without an earth line choke and the model FN 9233E including earth line choke.

Operating frequencies range from DC to 400 Hz, and withstand voltages can be as high as 2500 V AC (phase to earth) and 1000 V AC phase to neutral). Designs comply with UL 1283, CSA 22.2-8-1986 and EN 60939.

Attenuation figures according to CISPR 17 are high (up to 70 dB), covering the RFI range from 10 kHz to 30 MHz and are specified for symmetrical and asymmetrical topologies.

30-Aug-2007

Contact Westek Electronics

Name:
Company Name:
Contact Number:
Email Address:
Your State:
Your Message:

Please uncheck this box if you don't want to receive the latest product updates in Ferret Daily Product News, Ferret's daily eNewsletter.

does not match
 
Your contact details will be passed onto this company ( see our Privacy Policy )
More Articles

Westek Electronics News


CDN devices for immunity testing Teseq’s CDN devices for immunity testing available from Westek Electronics (25-Nov-2008)
Teseq’s comprehensive range of CDN (Coupling/Decoupling Network) devices, used to permit conducted immunity testing in accordance with IEC/EN 61000-4-6, is available from Westek Electronics.

Schaffner FN 9244 IEC inlet filters, designed to conduct noise insertion loss The new Schaffner FN 9244 series IEC inlet filters, from Westek Electronics (21-Nov-2008)
The Schaffner FN 9244 series IEC inlet filters have conducted noise insertion loss for both asymmetrical (common mode) and symmetrical (differential) components.

ISN T8-Cat 6 impedance stabilisation network Teseq’s Impedance Stabilisation Network for Cat 6 cable connected devices available from Westek Electronics (20-Nov-2008)
Teseq, formerly Schaffner Test Systems, have introduced a new impedance stabilisation network (ISN) that is compatible with the highest speed class of Ethernet / Category 6 cables.

Schaffner EMI Three-phase Filter available from Westek Electronics (19-Nov-2008)
The Schaffner EMI Three-phase Filter, from Westek Electronics, can fully utilise a three-conductor topology and is well suited to three-phase power drive applications.

Schaffner EMI and EMC Filters available from Westek Electronics (18-Nov-2008)
Schaffner EMI and EMC Filters for Power Inlets and PCB Mounting are available from Westek Electronics.

News Sign up View all  |  RSS Feed

Related Articles

DC-Micromotor Type 0615 and Planetary Gearhead Type 06/1 available from Erntec DC-Micromotor Type 0615 and Planetary Gearhead Type 06/1 available from Erntec (25-Nov-2008)
The ironless DC-Micromotor, Type 0615 measures 6mm in diametre, 15mm in length and weighs 2g. It is available from Erntec. The DC-Micromotors are available in nominal voltages of 1.5, 3 and 4.5VDC, with no-load speeds of 19,900 rpm, stall torque of 0,23mNm and output power of 0.12watt.

Schaffner EMI Three-phase Filter available from Westek Electronics (19-Nov-2008)
The Schaffner EMI Three-phase Filter, from Westek Electronics, can fully utilise a three-conductor topology and is well suited to three-phase power drive applications.

Schaffner EMI and EMC Filters available from Westek Electronics (18-Nov-2008)
Schaffner EMI and EMC Filters for Power Inlets and PCB Mounting are available from Westek Electronics.

Schaffner series of chokes available from Westek Electronics (17-Nov-2008)
Schaffner’s EV/EH series RFI common mode suppression chokes, RN series current-compensated EMI chokes and RD series current-compensated EMI chokes are available from Westek Electronics.

Broadband, RF power amplifiers for EMC applications from Teseq, and available from Westek Electronics (6-Nov-2008)
Teseq makes available a range of RF broadband, power amplifiers covering frequencies to 6 GHz and with output powers to 1100 watts, suitable for EMC immunity/susceptibility testing.

Access over 2000 Manufacturing and Operations jobs online!