RF field meter covers spectra to 18 GHz

Got a Question for Westek Electronics?

Wstek546-SFD smart field meter

The Smart Fieldmeter_Digital (SFD) electromagnetic field monitor is a battery-operated instrument/data logger capable of 55 hours measurement operation with primary or rechargeable cells. The standard SFD electromagnetic field monitor is supplied with probes selectable from three isotropic models (0.2MHz - 3GHz; 2MHz - 12.5GHz; 3MHz - 18GHz). Probes are automatically calibrated on insertion. Field measurements can be made in Volts/Metre (0.01-1000 V/m), and W/cm2 (0.02 nW/cm2-249 mW/cm2) on the basis of three-axis isotropic rms observations. Every Kit includes: meter in hard case with accessories (AC/DC charger, table tripod, mounting clip, meter-probe SMA cable, SD card) and User Manual with Calibration Certificate.

The field monitor’s auto zero function operates at regular intervals and is accurate even in very high field strength environments. Measurements can be made on the basis of spatially averaged or time averaged analysis (30 ms to 30 s, under software control). The SFD bright, colour OLED display shows instant, average and maximum values at the same time, as well as remaining battery life, temperature, probe type and serial number, log file name and date.

The SFD electromagnetic field monitor employs a powerful data processor with data storage on removable flash memory data storage cards (MMC compatible) capable of typically storing data files of 100,000 points with a total capacity of 999 data files. Format is in text readable by Excel or Word.

The field monitor has an adjustable threshold and 2 kHz buzzer operating on instant or average values provides an invaluable aid to rapid field intensity assessments. Interfaces available include serial, bi-directional, optically and fibre-optic RS232, and IR remote control.

The Smart Fieldmeter_Digital (SFD) electromagnetic field monitor is available from Westek Electronics .

30/06/2009 12:00 AM

Got a question about this product

More information about this product

Contact Details

Send to a friend

Contact Westek Electronics

By sending this enquiry you will also be informed of other related opportunities.

* First Name

Surname

Phone

* Your Email

State

Message

Be the first to know about new products, services and developments. Send me Ferret's newsletter.

Get new security code

* does not match

Send Enquiry

More products from Westek Electronics

Harmonic Filters by Westek Electronics

Westek Electronics provides active and passive harmonic filters for three-phase and single-phase circuits. Westek Electronics introduces the new MTE Matrix Series D harmonic filters. MTE Matrix harmonic filters ...

Enquire Now

Electronic Testing Equipment by Westek Electronics

Westek Electronics offers a range of testing and measuring equipment to suit various industries and applications. Westek Electronics have a range of testing instruments to provide compliant solutions for ...

Enquire Now

AC Power Source by Westek Electronics

Westek Electronics offers a wide range of electronic testing and electrical testing equipment. The lastest addition is the new 2253ix AC Source from California Instruments which represents a new generation AC Source ...

Enquire Now

Electrical Components and Electronic Assembly Products by Westek Electronics

Power Electronics, Electronic Components and Electronic Assembly Parts Westek Electronics's Power Electronics Division offer a range of power electronics components and assemblies. These devices are for ...

Enquire Now

RFI and EMI Filters by Westek Electronics

Reduction of broadband conducted and radiated radio frequency interference (RFI) is a vital element of power quality and electromagnetic compatibility (EMC). Westek Electronics offers a range of EMI or RFI power line ...

Enquire Now

DC Power Supplies from Westek Electronics

Westek Electronics offer a wide range of testing equipment products including DC Power Supplies for any application. Westek Electronics is an Australian Distributor for Ametek Programmable Power, the largest ...

Enquire Now

News sign up

Additional Westek Electronics News

Westek Electronics 559-Pddevices 600 series surge protectors (18/11/2009)

The PD Devices DSP 600 series surge protector devices from Westek Electronics provide comprehensive protection against incoming high voltage spikes and slower rise time disturbances for single phase (240 volt) and three-phase ...

560-PDdevices MDSP3 surge protectors from Westek Electronics (6/11/2009)

PD Devices MDSP3 series surge protector devices, from Westek Electronics provide comprehensive protection against incoming high voltage spikes and slower rise time disturbances for three-phase (415 vo

New software from Voltech to make harmonics and flicker pre-compliance testing easy is now available from Westek Electronics

Harmonics and flicker pre-compliance testing made easy with new Voltech software from Westek Electronics (4/11/2009)

Voltech has released new software for pre-compliance testing for harmonics, inter-harmonics and flicker, which is now available from Westek Electronics.

IGBT driver boards available from Westek Electronics (25/08/2009)

Available from Westek Electronics, the Powerex BG2B Universal Gate Drive prototype board for IGBT pairs simplifies the design of high power, high dual IGBT driver boards.

Schaffner EMC/EMI low leakage filters available from Westek Electronics (24/08/2009)

Schaffner has introduced a new series of EMC/EMI single-phase, 240 V AC low leakage filters, available from Westek Electronics.

IGBT driver board from Westek Electronics (21/08/2009)

The Powerex BG2B Universal Gate Drive prototype board for IGBT pairs, simplifies the design of high power, high dual IGBTs with ratings to 400 amps.

AC Load banks from Avtron (7/08/2009)

Avtron AC single-phase and three-phase load banks with dissipation capacities to 6 Megawatts are available from Westek Electronics.

UPS systems from Westek Electronics (7/08/2009)

UPS systems suitable for mission-critical applications including data centres, hospitals, defence, etc to ratings exceeding 1 MW are available.

Teseq launches expanded broadband RF Amplifier range for EMC testing by Westek Electronics (27/07/2009)

EMC RF immunity testing is a harsh environment. RF Amplifiers are often operated at their limits and into poor VSWR match.

Schaffner ECOSine Active 60 Amp filter available from Westek Electronics (17/07/2009)

Available from Westek Electronics, the new, ECOSine Active 60 Amp filter from Schaffner is specifically designed for harmonics mitigation in commercial and industrial electrical installations.

The new Sorensen Series XEL-P DC linear power supplies (16/07/2009)

The new Sorensen Series XEL-P DC linear power supplies are ideally suited to bench work as well ATE tasks.

Power quality analyzer monitors and controls available from Westek Electronics (16/07/2009)

Available from Westek Electronics, the new Janitza, DIN-rail mounting, UMG 511 power quality analyzer provides continuous 24/7 monitoring.

Power Factor Correction capacitor banks by Westek (15/07/2009)

Power factor correction capacitor banks from Janitza Electronics, suitable for LV three-phase power distribution, are now available complete with detuning chokes, discharge resistors, internal busbar

AC/DC power and load system is programmable (30/06/2009)

The new ReFlex Power AC/DC power and load system from Elgar is a modular array of plug-and-play AC and DC power supplies as well as DC electronic loads.

Sorenson power supply systems by Westek Electrical

Sorensen SG Series power supply systems now available from Westek Electronics (30/06/2009)

Sorensen SG Series power supply systems now available from Westek Electronics provide wide voltage and power output ratings for a wide range of applications including process control, automotive compo

The Taoma electro-magnetic field analyser

Taoma electro-magnetic field analysers available from Westek Electronics (22/04/2009)

Taoma electro-magnetic field monitoring instrument is an electric, magnetic and electromagnetic field analyser that is suitable for a wide range of applications. The Taoma electro-magnetic field analy

Westek Electronics release new Langer NNB21 LISN for automotive EMC testing (20/04/2009)

Westek Electronics have released the new Langer NNB21 Line Impedance Stabilisation Network (LISN) suitable for automotive conducted interference testing in accordance with CISPR 25/ISO 7637.

Schaffner FN 2200 DC EMC/EMI filter series for photovoltaic panels available from Westek Electronics (17/04/2009)

The new Schaffner FN 2200 DC EMC/EMI filter series, available from Westek Electronics for photovoltaic panels, is designed to prevent conducted RF from the inverter reducing the potential for radiate

Taoma electro-magnetic field analyser from Westek Electronics (26/03/2009)

The new Taoma universal electro-magnetic field analyser available from Westek Electronics is suitable for measuring magnetic and electric fields in the frequency range from 5Hz to 6GHz.

Schaffner Ecosine active filters available from Westek Electronics (18/03/2009)

The Schaffner Ecosine active filters, available from Westek Electronics, have high response speed and are suitable for power factor correction and also for inrush current compensation, thus making them suitable for taxing ...

519-Teseq MD 4070 RF current sensor available from Westek Electronics (16/02/2009)

The new 519-Teseq MD 4070, available from Westek Electronics, can be used as a passive or active RF current sensor in the frequency range of 10kHz to 400MHz (a model variation is available extending t

Powertek SD1000 phase meters available from Westek Electronics (13/02/2009)

The new Powertek SD1000 phase meter, available from Westek Electronics, is immune to noise and multiple zero crossings by utilising discrete Fourier analysis, thus rejecting any noise and distortion without the need for ...

The KoCoS EPPE C8 Power Quality and Power Line Monitor

KoCoS EPPE C8 Power Quality and Power Line Monitor available from Westek Electronics (12/02/2009)

The new KoCoS EPPE C8 Power Quality and Power Line Monitor, available from Westek Electronics, is a comprehensive electrical parameters analyser in a compact, panel-mounting (144 x 144 x 280mm deep) i

Picotest U6200A Universal Counter available from Westek Electronics (11/02/2009)

The new Picotest U6200A Universal Counter, available from Westek Electronics, is a three, fully-isolated channel counter/frequency meter providing frequency measurement from 1MHz to 400MHz on channels

Schaffner FN 3280 three-phase EMC filter

Schaffner FN 3280 EMC filters available from Westek Electronics (10/02/2009)

The new Schaffner FN 3280 three-phase, four-wire EMC filters, available from Westek Electronics, are suitable for conducted common mode and differential mode RFI attenuation to 30MHz and higher. Schaffner FN 3280 filters ...

Würth Elektronik wire to board connectors available from Westek Electronics (9/02/2009)

Würth Elektronik wire to board connectors, available from Westek Electronics, are suitable when users are looking for a disconnectable crimp style connector.

Würth Elektronik WR-TBL terminal blocks from Westek Electronics (6/02/2009)

Würth Elektronik WR-TBL from Westek Electronics are available in many different connection types and offer large and modular terminal block possibilities in order to fulfill most of the requirements which can be found in ...

Würth Elektronik D-Sub connectors from Westek Electronics (5/02/2009)

Westek Electronics offer Würth Elektronik D-Sub connectors. Würth Elektronik D-Sub connectors are produced according to CECC 75 301-802 (equivalent to DIN41652) dimensions and are compatible with the existing worldwide standards.

Mini Din, DVI and HDMI communication connectors available from Westek Electronics (4/02/2009)

Würth Elektronik offer a range of communication connectors such as USB, modular jacks, Mini Din, DVI and HDMI. These communication connectors are available from Westek Electronics.

Würth Elektronik WR-MPC4 mini power connectors available from Westek Electronics (3/02/2009)

Würth Elektronik WR-MPC4, available from Westek Electronics, is a 4.20mm mini power connector designed to meet the requirements of customers when high current is needed together in a small space. Wire-to-wire and wire-to-board ...

Würth Elektronik PLCC sockets available from Westek Electronics (2/02/2009)

PLCC sockets, available from Westek Electronics, are soldered to the plated-through holes or to the SMT layout on a PCB, in order to mount the carrier on the board. This makes the replacement and upgrade of memory chips ...

Würth Elektronik WR-BHD box header and IDC flat cable connectors available from Westek Electronics (30/01/2009)

WR-BHD box header and IDC flat cable connectors, available from Westek Electronics, are two popular types of connectors found in all electronic equipment.

Würth Elektronik flat cables available from Westek Electronics (29/01/2009)

Würth Elektronik flat cables, available from Westek Electronics, are compatible with connectors including (WR-MM and WR-BHD) as well as with D-Sub IDC connectors.

WR-MM mini module IDC connectors available from Westek Electronics (28/01/2009)

WR-MM mini module connectors, available from Westek Electronics, are compact and low profile IDC connectors for ribbon cable of 1.27mm pitch.

Pin and socket headers for ZIF connectors from Westek Electronics (27/01/2009)

ZIF connectors have been developed to meet a combination of requirements such as low profile, light-weight, secure yet easily removable connections. ZIF connectors are used for attaching wires to PCBs. The wires, formed ...

Dynex IGBT modules available from Westek Electronics (13/01/2009)

New Dynex IGBT modules, available from Westek Electronics, cover a large number of applications including uni-directional and bi-directional switching, chopper, dual and single switching, as well as half-bridge operation.

The Schaffner FN 530 sine wave/EMC output filter

Sine wave/EMC output filter for variable speed drives available from Westek Electronics (15/12/2008)

The new Schaffner FN 530 Combination sine wave/EMC output filter for variable speed drives, available from Westek Electronics, solves three important problems for motors as loads for variable speed drives.

Teseq’s CDN devices for immunity testing available from Westek Electronics (25/11/2008)

Teseq’s comprehensive range of CDN (Coupling/Decoupling Network) devices, used to permit conducted immunity testing in accordance with IEC/EN 61000-4-6, is available from Westek Electronics.

Schaffner FN 9244 IEC inlet filters, designed to conduct noise insertion loss

The new Schaffner FN 9244 series IEC inlet filters, from Westek Electronics (21/11/2008)

The Schaffner FN 9244 series IEC inlet filters have conducted noise insertion loss for both asymmetrical (common mode) and symmetrical (differential) components.

ISN T8-Cat 6 impedance stabilisation network

Teseq’s Impedance Stabilisation Network for Cat 6 cable connected devices available from Westek Electronics (20/11/2008)

Teseq, formerly Schaffner Test Systems, have introduced a new impedance stabilisation network (ISN) that is compatible with the highest speed class of Ethernet / Category 6 cables.

Schaffner EMI Three-phase Filter available from Westek Electronics (19/11/2008)

The Schaffner EMI Three-phase Filter, from Westek Electronics, can fully utilise a three-conductor topology and is well suited to three-phase power drive applications.

Schaffner EMI and EMC Filters available from Westek Electronics (18/11/2008)

Schaffner EMI and EMC Filters for Power Inlets and PCB Mounting are available from Westek Electronics.

Schaffner series of chokes available from Westek Electronics (17/11/2008)

Schaffner’s EV/EH series RFI common mode suppression chokes, RN series current-compensated EMI chokes and RD series current-compensated EMI chokes are available from Westek Electronics.

Schaffner Customised EMI and EMC Filter Solutions Available from Westek Electronics (11/11/2008)

Schaffner's standard products, available from Westek Electronics, satisfy an extremely diverse range of EMI and conducted RFI requirements.

Teseq broadband power amplifiers for EMC applications available from Westek Electronics (11/11/2008)

Teseq (formerly the instrumentation division of Schaffner) have released a large range of RF broadband, power amplifiers covering frequencies to 6 GHz and with output powers to 1100 watts. The RF broadband, power amplifiers ...

Schaffner Three-Stage EMI Filter Available from Westek Electronics (10/11/2008)

Westek Electronics offer Schaffner’s well-designed, three-stage EMI filter for military applications, meeting maximum attenuation requirements from a few kHz to 5 GHz.

Schaffner EMI filters available from Westek Electronics (7/11/2008)

Westek Electronics offer Schaffner EMI filter, which is designed for fast chassis mounting and has good RFI attenuation properties because of the use of high saturation chokes.

Broadband, RF power amplifiers for EMC applications from Teseq, and available from Westek Electronics (6/11/2008)

Teseq makes available a range of RF broadband, power amplifiers covering frequencies to 6 GHz and with output powers to 1100 watts, suitable for EMC immunity/susceptibility testing.

The Wstek508-SPC smart power conditioner

Wstek508-SPC smart power conditioner from Westek Electronics (3/11/2008)

Westek Electronics supply the new smart power conditioner model SPC from PQ Tech, which is an active harmonic filter series suitable for single phase sub-distribution circuits in commercial buildings, shopping and entertainment ...

The Vitrek V4 AC and DC Hipot Electrical Safety Tester

Vitrek V4 AC and DC Hipot Electrical Safety Tester available from Westek Electronics (29/10/2008)

The new Vitrek V4 Hipot Electrical Safety Tester, available from Westek Electronics, combines AC and DC Hipot (dielectric strength) with high current ground bond and insulation resistance testing, all in one feature rich, ...

DIN-rail mountable power and disturbance monitoring relay from Westek Electronics (10/10/2008)

Westek Electronics provide the new PQube DIN-rail mountable power and disturbance monitoring relay. It captures voltage disturbances and time-stamped waveforms, storing captured information on a plug-in 4 GB SD card that ...

Westek Electronics offer Industrial Power Corruptors for testing electrical gear (24/09/2008)

Westek Electronics supply the new Industrial Power Corruptor (IPC) from Power Standards Laboratories to test the performance of electrical devices including protection gear, industrial plants, process and machine control ...

Protection relay and circuit breaker testing equipment from Westek Electronics (29/08/2008)

Westek Electronics provide sales and distribution services for a range of protection relay and circuit breaker testing instruments and network monitoring equipment manufactured by KoCoS Messtechnik AG.

Power electronics components from Westek Electronics (18/08/2008)

Westek Electronics offer a large range of power electronics components, which are suitable for demanding applications of high frequency and high current.

Vitrek 4600A Series Precision High Voltage Meters from Westek Electronics (22/07/2008)

The new Vitrek 4600A Series Precision High Voltage Meters, available from Westek Electronics, comprise of three models providing measurement to 20, 40, and 70 Kilovolts DC and AC as TRMS values. The multi-slope integrating ...

KoCoS PROMET 100 Precision Ohm Meter from Westek Electronics (21/07/2008)

The new KoCoS PROMET 100 Precision Ohm Meter, available from Westek Electronics, is suited to tasks including earth bond and weld testing as well as circuit breaker main contact testing. The KoCoS PROMET 100 Precision Ohm ...

462-NSG 3060 multi-function generator from Westek Electronics (18/07/2008)

The basic Teseq NSG 3060 system, available from Westek Electronics, is designed to fulfil requirements for CE mark and ANSI C62.41 testing including Combination wave, Ring wave and EFT pulses as well as PQT.

Output filter for motor drives from Westek Electronics (20/06/2008)

The new output filters from Schaffner, the model FN 510 series, reduce voltage slew rate (dV/dt) from inverter drives for variable speed motors.

Powerex rectifier diodes available from Westek Electronics (12/05/2008)

Powerex, represented in Australia by Westek Electronics, offers Powerex R700 and R701 rectifier diode series.

Harmonics filters available from Westek Electronics (8/05/2008)

IP20 rated ECOsine FN3410/3412 series of three phase harmonics filters feature light weight, well designed form-factor and compact dimensions

Three phase revenue meter testing instrumentation from Westek Electronics (3/04/2008)

The new KoCoS METES 340 REF three phase revenue meter test system, available from Westek Electronics, is suitable for testing and calibration of revenue meters.

Scanning Electrical Safety Analyser from Westek Electronics (2/04/2008)

The new Vitrek V5 Electrical Safety Analyser combines AC and DC dielectric strength testing, insulation resistance testing, leakage current and high current ground bond testing in accordance with UL, CSA, IEC and TUV standards.

New high voltage switching system from Westek Electronics (2/04/2008)

The new Vitrek 948i high voltage switching system is available from Westek Electronics.

Passive components available from Westek Electronics (5/03/2008)

A large range of Würth passive components is available via the Westek Electronics website.

Range of connectors available from Westek Electronics (4/03/2008)

A large range of Würth connectors is available via the Westek Electronics website.

Inductors, ferrites, filters and transformers from Westek Electronics (3/03/2008)

A large range of Würth inductors, ferrites, filters and transformers is available via the Westek Electronics website.

Power quality analyser with IP 65 protection available from Westek Electronics (15/01/2008)

The new KoCoS EPPE W8 polyphase power analyser is suitable for internal as well as outdoor use being equipped with battery backup as well as mains connectivity.

Single phase Matrix filters from Westek Electronics (14/01/2008)

The new MTE single-phase Matrix filters reduce harmonics commonly found in the input current to power electronics

Current generators available from Westek Electronics (11/01/2008)

The new AFJ (GI series--- 500 VA to 50 kVA AC rating), and AC/DC (GIS series—500 VA to 50 kVA rating) current generators provide a fully isolated, floating current source at variable frequency between DC and 1000 Hz, currents ...

AFJ Test System for luminaries available from Westek Electronics (9/01/2008)

The new AFJ Test System for luminaires permits the testing of both electronic and traditional ballasted luminaires, including those with switch-type starter circuits.

AC and DC power supplies suitable for ATE and Avionics from Westek Electronics (9/01/2008)

The new California Instruments Compact iX and i series AC and DC power supplies are comprehensive test systems suitable for ATE and avionics applications including measurement and harmonic analysis (iX series).

Westek Electronics launches new power analyser (8/01/2008)

The new Voltech PM 1000+ precision power analyser from Westek Electronics is suitable for single-phase power and energy measurement of power circuits, industrial and domestic appliances, linear and switch-mode power supplies ...

New RFI filter available from Westek Electronics (8/01/2008)

The new Schaffner FN 9233-E RFI single-stage, filter with IEC socket connector is equipped with an earth line choke to suppress RF earth currents.

Westek Electronics launches TESEQ AES 5500 automotive emissions testing system (7/01/2008)

The new TESEQ AES 5500 automotive emissions testing system from Westek Electronics complies with the testing protocols required under ISO 7637-2.

Signal generator and immunity test system from Westek Electronics (26/11/2007)

The new Schaffner NSG 4070 combined signal generator and immunity test system available from Westek Electronics is a flexible EMC testing facility for bulk current injection (BCI) and IEC 61000-4-3/6 evaluations.

Westek Electronics provides new MTE DC link chokes (13/11/2007)

The new MTE DC link chokes are designed to reduce DC ripple as well as AC input harmonics.

MTE single phase matrix filters available from Westek Electronics (12/11/2007)

The new MTE single-phase matrix filters reduce harmonics commonly found in the input current to power electronics such as small rating variable speed drives, welders, battery chargers, servo drives, brushless DC motor drives, ...

Portable 1 kVA benchtop power supply available from Westek Electronics (9/11/2007)

The new California Instruments EC1000S 1 kVA benchtop AC and DC power supply is a comprehensive test system including measurement and harmonic analysis of output current.

Westek Electronics provides new AFJ current generators (8/11/2007)

The new AFJ (GI series--- 500VA to 50kVA AC rating), and AC/DC (GIS series—500VA to 50 kVA rating) current generators provide a fully isolated, floating current source at variable frequency between DC and 1000 Hz, currents ...

Westek Electronics introduces AC and DC power supplies suitable for ATE and avionic applications (7/11/2007)

The new California Instruments compact iX and i series AC and DC power supplies are comprehensive test systems suitable for ATE and avionics applications including measurement and harmonic analysis (iX series).

Westek Electronics provides Helmholz magnetic field coils for EMC applications (6/11/2007)

The new Schwartzbeck model HHS 5204-36 Helmholtz-coils are especially designed to generate precisely defined magnetic fields from DC to the upper end of the audio frequency range and beyond to 500 kHz.

Microwave logarithmic antenna available from Westek Electronics (5/11/2007)

The new STLP 9149 from Schwarzbeck Elektronik is a stacked logarithmic-periodic broadband antenna for linear polarised RX- and TX applications in the microwave frequency range.

A series of Langer’s IC EMC testing devices available from Westek Electronics (5/11/2007)

Langer EMV Technik has released a series of IC EMC testing devices including RF current measurement and burst injection probes, as well as a pulse burst generator.

Economic New ESD gun from Westek Electronics (3/10/2007)

The new Teseq NSG 437 available from Westek Electronics is economic and easy to use.

New series active filters available from Westek Electronics (19/09/2007)

The AIM AHF-series active filters available from Westek Electronics are based on IGBT technology and utilise a somewhat similar method to that used in inverters and converters to generate an anti-phase signal to the harmonic ...

New version production tester available from Westek Electronics (18/09/2007)

The Voltech ATi production tester available from Westek Electronics is suitable for transformers, telecommunication transformers (ISDN, DSL and HDSL), ferrites, toroids, wire-wound coils, inductors, passive components including ...

Westek Electronics introduces FN 9233 IEC inlet filters (30/08/2007)

The new Schaffner FN 9233 IEC filters from Westek Electronics provide a rapid solution for attaining effective EMC compliance utilising a small form factor component.

New range of YK series inverters available from Westek Electronics (6/06/2007)

The Asian Electron digital inverters available from Westek Electronics are ideally suited to power apparatus with narrow tolerances on voltage form factor.

New range of Asian Electron inverters available from Westek Electronics (22/05/2007)

New range of Asian Electron YK series, single-phase inverters provides users with low distortion sinewave outputs with a THD of less than 3%, including even low power units rated at 200 Watts.

Westek Electronics unveils programmable power supply (10/05/2007)

New Motech PPS 3210 programmable power supply, available from Westek Electronics, is a high resolution (16 bit) system with three channels providing 0 to 30 V DC (channels 1 and 2, with 90 watt rating), and 0 to 15 V DC ...

Programmable DC sources available from Westek Electronics (9/05/2007)

New slim-line, 1-U rack-mounting Motech DS 3620 and 3640 programmable DC sources, available from, Westek Electronics, are ideal for incorporating in ATE set-ups as well as for individual testing tasks.

Universal Counter with high bandwidth available from Westek Electronics (26/04/2007)

The new Picotest model U6200A Universal Counter is designed for frequency (to 6 GHz standard; 12.4 GHz optional) and time domain measurements from 1.5 nano seconds to 10 seconds with a time resolution of 35 picoseconds.

IEC inlet filter introduced by Westek Electronics (8/03/2007)

New Schaffner FN9263 series IEC-inlet filters introduced by Westek Electronics are ideally suited to 1-U form factor equipment.

Programmable power supply introduced by Westek Electronics (6/03/2007)

Westek Electronics’ new Motech PPS 3210 programmable power supply is a high resolution (16 bit) system.

a range of ancillaries to facilitate electrostatic discharge

Westek introduces handy auxiliary attachments for electrostatic discharge testing (21/11/2006)

The new Schaffner INA 4430 ESD charge remover speeds up testing, safely. Discharge cycle times can be programmed via the NSG 438 ESD gun utilising the instrument’s extensive suites of firmware.

Wireless Wizard hand-held spectrum analyser from Bantam Instruments (27/10/2006)

The new Bantam Instruments, Wireless Wizard hand-held spectrum analyser seeks out Wi-Fi access points and spectrum analysis in the frequency range of 2.4 GHz to 6.0 GHz.

EMC comb generator CGE01for small enclosures released (24/10/2006)

The new York EMC Services comb generator emitter (CGE01) was developed for the evaluation of shielding effectiveness for small enclosures.

Dc loads suitable for high currents (20/09/2006)

THE new Prodigit 3350 series, high current, dc loads cover a load range of 1200 watts to 1800 watts, maximum dc voltages of 60 volts and a current range of 120 amps to 360 amps. Applications include SMPS transient response ...

Elastomer tape with diverse uses (19/09/2006)

TOMMY Tape is manufactured from a specially formulated silicone rubber compound and has a self-bonding/non-adhesive characteristic that fuses to itself within 24 hours, leaving no mastic residue if removed.

EMC filter for critical and NEMP applications (18/09/2006)

THE Schaffner FN 700 Z TEMPEST, multi-stage filters are characterised by very high insertion loss response curves. With a 50 ohm source and output impedance, symmetrical insertion loss is well in excess of 80dB to 3GHz and ...

The very latest in harmonic filtering developments.

Cost-effective, space reducing harmonic filters (13/09/2006)

THE widespread use of variable frequency drives has made the imposition of harmonic distortion limits at the point of common coupling (pcc) which for many industrial and commercial installations is the metering point, necessary.

Combined ac and dc power supply (12/09/2006)

THE new California Instruments MX series 15, 30, 45, 90 and 135kVA combined ac and dc power supplies are designed for product testing. The 15kVA system is single phase only. The 30 and 45kVA systems are available with single ...

Combined ac and dc power supply (31/08/2006)

CALIFORNIA Instruments MX series 15, 30, 45, 90 and 135kVA combined ac and dc power supplies are designed for cost-effective product testing and integrate readily into ATE systems.

Harmonic filters (28/08/2006)

The widespread use of variable frequency drives has made the imposition of harmonic distortion limits at the point of common coupling (pcc) which for many industrial and commercial installations is the metering point, necessary. ...

Westek Electronics introduces new harmonic filters, MATRIX D series filters (24/08/2006)

New harmonic filters, MATRIX D series filters, have been introduced by Westek Electronics

Full-featured DMM with USB port (25/07/2006)

THE new Picotest M3500A six and a half digit DMM with USB port and optional 10 channel scanner card from Westek Electronics Pty Ltd is suited to R&D, scientific as well production and service tasks. It measures AC and DC ...

EMC presentation on automotive systems (25/07/2006)

TIMOTHY Horacek, EMC Product Specialist with Schaffner EMV AG, Europe, has extensive international experience in immunity testing for automotive electronics and will give an overview of current testing technology as well ...

Seminar for automotive systems suppliers (24/07/2006)

THE EMC Society (Victoria) will host Timothy Horacek, EMC Product Specialist with Schaffner EMV AG, in Melbourne, as announced by Westek Electronics Pty Ltd. Mr Horacek, who has extensive international experience in immunity ...

The PQ1 single-phase power quality sensor/relay

Power quality relay (14/07/2006)

THE new PQ1 single-phase power quality sensor/relay from Power Standards Lab is a phase-to-neutral or phase-to-phase monitor suitable for a large range of industrial control applications and was developed by Westek Electronics.

Powerful phase control thyristors (14/07/2006)

The new Powerex TCS4_340H disc-pack, phase control thyristors are characterised by extremely low peak on-state voltage, high current rating of 3400 amps with 50 Hz peak single cycle surge current as high as 56.5 kA, high ...

New single-phase filters (12/07/2006)

The newly introduced FN 2030-single stage, and FN 2090 two stage, single-phase EMC filters from Schaffner are available in a finely graduated range of currents to suit specific design requirements. The chassis-mounting filters ...

Compact ultra-low leakage EMC filters (23/06/2006)

THE new Schaffner FN 3025 (screw-mounting) and FN 3026 (TS-35 DIN-rail mounting) three-phase filters have been designed bearing in mind rapid installation and environmental and safety concerns as well as EMC RF-suppression ...

Single-phase EMC filters (6/06/2006)

SCHAFFNER FN 2030-single stage, and FN 2090 two stage, single-phase EMC filters are available from Westek Electronics in a finely graduated range of currents to suit specific design requirements.

IGBT modules (1/06/2006)

THE new IGBT modules from Powerex provide efficient operation and a high degree of ruggedness and long life for applications including traction inverters, UPS systems, servo drives, variable speed motor drives, and welding.

Medium voltage capacitors (31/05/2006)

THE new Electronicon resin-filled three-phase, star-connected medium voltage capacitors are self-healing and are ideally suited for applications including power factor correction.

Ac/dc liquid resin-filled capacitors (31/05/2006)

THE new Electronicon E62 series ac/dc capacitors from Westek Electronics are suited to power electronics applications such as commutation, smoothing and surge discharging, by virtue of their ability to withstand high rms ...

The Voltech PM 6000 ac/dc power analyser.

Polyphase electrical power analyser (24/03/2006)

THE new Voltech PM 6000 ac/dc Power Analyser is a modular system with provision for up to six freely assignable floating analyser channels. Available from Westek Electronics Pty Ltd, the PM 6000 is therefore suitable for ...

Precision current shunt (24/03/2006)

PRODIGIT Electronics’ precision current shunt can be used in functions such as ac/dc current meter, ac/dc current sensor, ac/dc power supply, ac/dc electronic load and ac/dc power meter (with suitable ancillary apparatus).

Leakage current breaker tester (22/03/2006)

THE new Prodigit Electronics Model 3280 earth leakage breaker tester is suitable for testing of tripping current to 150mA in 115, 230 and 380V circuits. An adjustable timing function permits the setting of dwell time and ...

Würth Elektronik’s new guide book covers the selection and applications of filters.

Invaluable design guide for chokes and filters (2/03/2006)

A comprehensive 300 page design guide for filters and chokes is now available from Westek Electronics. Published by Würth Elektronik, the book ‘A Trilogy of Inductors’ has been written by three specialist engineers.

Miniature point-of load dc-dc converters (1/03/2006)

THE new Powerstax MxxTG range of DIP24 miniature point-of-load dc-dc converters are available in single or dual output versions from Westek Electronics. The range provides for 1.5W to 8W regulated 4:1 inputs. Plastic or ...

Modular power supplies (22/02/2006)

THE new Powerstax Multistax power supplies are modular and are easily customised. The basic configuration comprises of either a six-slot, or four-slot mainframe including ac/dc input, EMC filter, resonant switching feed ...

Credit-card sized power supply (22/02/2006)

THE new medically approved Condor GSM15 is suitable for medical applications such as monitors or pumps and general applications requiring a small power supply. The GSM15 family of 15W ac/dc supplies is available with 5, ...

The probe is ideal for EMC immunity testing.

E-field EMC immunity test for IC pins and tracks (17/02/2006)

THE new Langer E-field probe, model ES 08 D, capacitively couples high voltage burst pulses into IC pins and PCB tracks to enable highly specific EMC immunity testing on densely populated boards. It is available from Westek ...

Full-featured laboratory DMM with USB port (7/02/2006)

THE new Picotest M3500A six and a half digit DMM with USB port and optional 10 channel scanner card is suited to R&D, scientific and production tasks. Available from Westek Electronics Pty Ltd, it measures ac and dc voltage, ...

Dc electronic load modules (18/01/2006)

THE new Prodigit series 33xx electronic loads from Westek Electronics are suited to R&D, workshops and ATE applications. The modular construction permits the housing of up to four individual load modules into a mainframe ...

Four-wire interference suppression (19/12/2005)

SCHAFFNER has extended the upper range of its popular FN3280 series to provide compatibility for higher powered installations. Interference suppression applied directly at the mains input is often the quickest route to the ...

Exhibits a very wide dynamic field range.

Selective dual band probe (22/11/2005)

WESTEK Electronics has released a selective dual band probe for use with the Smart Fieldmeter series of precision omni directional RF field strength instruments, the PI-01V-900/1900. This probe covers two GSM bands 925-960MHz ...

High current SCR isolated modules (4/11/2005)

POWEREX, represented in Australia by Westek Electronics Pty Ltd, has released the unique PS43xx15 family of single SCR, 1800V isolated modules. With a footprint of only 101.6mm x 198.1mm, a very high current of 1500A is ...

High current isolated mounting base diode (20/10/2005)

WESTEK Electronics has released the new Powerex series of POW-R-BLOK, very high current isolated mounting base diode and SCR modules in single or dual configurations. Current ratings of up to 2500A with voltage ratings up ...

Can be operated manually from its front panel controller.

High power ac-dc power supply (11/10/2005)

WESTEK Electronics has announced the addition of the new MX30 ac-dc programmable power supplies to the very popular MX series with configurations of up to 135kVA. The renowned and popular California Instruments MX family ...

The amplifier has excellent harmonic performance.

Solid state broadband 0.8-2.0GHz RF amplifier (7/10/2005)

OPHIR’S new model 5303068A class broadband A/AB linear amplifier with a frequency range of 0.8 to 2.0GHz is suitable for wide-band communications requiring receive/transmit functions in CW/AM/FM/PM and pulse modes. The amplifier ...

High current SCR module (6/10/2005)

POWEREX, represented in Australia by Westek Electronics Pty Ltd, has launched the unique PS43xx15 family of single SCR, 1800V isolated modules. With a footprint of only 101.6mm x 198.1mm, a very high current of 1500A is ...

Requires only a single 28V dc power supply.

Ophir solid state broadband (20-1000MHz) RF amplifier (29/09/2005)

THE new Ophir model 5303039D class broadband A/AB linear amplifier with a frequency range of 20 to 1000MHz is suitable for wide-band communications requiring receive/transmit functions in CW/AM/FM/PM and pulse modes. The ...

A graphical user interface is included with each KDC series power supply.

New dc power supplies with DSP (2/09/2005)

THE new Argantix KDC DSP-based series of dc power supplies is a high power-density design with dc voltage ranges from 30V to 600Vdc and currents ranging to 500A, with higher current ratings being achieved through parallelling. ...

Dv/dt reactor protects motors (8/07/2005)

WESTEK Electronics has released the MTE Series A dv/dt filters, designed to protect ac motors from the destructive effects of peak voltages typical of long cable runs between the inverter and motor.

Highest possible ratio of asymmetric to symmetric impedance.

Common-mode suppressing inductors (8/06/2005)

WÜRTH, represented in Australia by Westek Electronics, has released common mode suppressing inductors that cover applications including USB ports, Firewire/IEEE 1394 configurations, LAN, PBX, PCs, power supplies, industrial ...

Modular battery tester and software (3/06/2005)

THE new modular BaSyTec battery testing system is suited to research, development and production requirements. The system has testing regimes including galvanostatic, potentiometric and cyclic voltammetry testing of single ...

Supported by detailed impedance-frequency characteristics.

Ferrite beads solve EMI problems (2/06/2005)

WÜRTH Elektronik, represented in Australia by Westek Electronics, has released a range of ferrite beads that solve EMI problems. The products range from the CBF series comprised of seven basic frequency response characteristic ...

Handheld RF spectrum analyser (10/05/2005)

WESTEK Electronics has released the Bantam Instruments model 401B personal spectrum analyser. It is suited to EMC precompliance testing for a range of radio frequency applications such as wireless LANs and modems and paging ...

Handheld RF spectrum analyser (5/05/2005)

WESTEK Electronics has released the Bantam Instruments model 401B personal spectrum analyser. It is suitable for EMC precompliance testing for a range of radio frequency applications including wireless LANs and modems and ...

Function generators are provided with a linear and logarithmic sweep function.

15MHz sweep/function generator (5/05/2005)

WESTEK Electronics has released the Motech model FG708S and F function generators, providing a large number of waveforms including triangular, square, sine wave, pulse and dc signals in the frequency range of 0MHz to 1MHz.

Mounting design facilitates convenient installation by snapping in the filters on the common TS 35 DIN rails.

EMC filters for DIN rail mounting (4/05/2005)

WESTEK Electronics has released the DIN-rail mounting Schaffner EMC filters, providing a compact, and easily installed solution to input filtering requirements of both single and two-phase equipment. They are suitable for ...

At frequencies beyond 100MHz the typical insertion loss is in excess of 40dB.

Interposing EMC filters for D-connectors (3/05/2005)

WESTEK Electronics has released Würth D-SUB-Filter adaptors, a ready-made solution for minimising cable-transmitted RF interference. Equipped with an internal PCB-mounted 1000pF capacitor, the adaptors are available in executions ...

Sine wave filters for PWM equipment (16/03/2005)

THE new MTE series A sine wave filters are suited to service as output filters for variable speed drives, UPS systems, and other PWM equipment with switching frequencies between 2kHz and 8kHz. The MTE filters can also be ...

All products are supported by detailed impedance-frequency characteristics.

Ferrite beads solve EMI problems (14/03/2005)

WÜRTH Elektronik, represented in Australia by Westek Electronics, offers a range of ferrite beads to solve EMI problems. The products include the CBF series of seven basic frequency response characteristic groupings with ...

All testing is available from a single output connector with electronic-switch control of the connection/disconnection of the vehicle's battery.

Automotive immunity testers (9/03/2005)

SCHAFFNER, represented in Australia by Westek Electronics, has introduced three immunity testing systems suitable for various ISO and SAE compliance regimes. The NSG 5500/5600 systems provide an economical solution by way ...

Schaffner MFO 6501 magnetic field testing device.

Magnetic field tester for power frequencies (7/03/2005)

THE new Schaffner model MFO 6501 magnetic field testing device provides for power frequency testing in accordance with EN/IEC 61000-4-8 and 61000-4-9. The device is comprised of a programmable low impedance power amplifier, ...

Schaffner MFO 6502 magnetic field testing device.

Magnetic field testing device (24/02/2005)

THE new Schaffner model MFO 6502 magnetic field testing device, available from Westek Electronics, provides for power frequency testing in accordance with EN/IEC 61000-4-8 and 61000-4-9. The device includes a programmable, ...

Modular system which can be purchased as a mainframe including hand-held controller, Interbus master controller and LAN (TCP/IP) interface.

Variable voltage sources (18/02/2005)

WESTEK Electronics has released the Schaffner model 6502 variable voltage source, providing the equipment under test (EUT) with variable power line voltage. It is controlled from the Schaffner Modula mainframe controller ...

Frequency is adjustable from 0.5Hz to 25Hz in five steps.

Electrostatic discharge gun (30/11/2004)

WESTEK Electronics has released the Schaffner model NSG 438 electrostatic discharge gun. It is suited to immunity testing to European Norms and AS/NZS standards.

Omnidirectional probe with an isotropicity of ±1.5 dB.

Field strength measurement meter (7/10/2004)

WESTEK Electronics has released the Smart Fieldmeter, suitable for field strength measurements in applications including AM and FM radio stations, TV stations, cellular telephony, industrial apparatus and EMC testing.

Attenuator and pulse suppressor for EMC testing (25/06/2004)

A COMMON problem in RF emission testing is the occurrence of high energy pulses as the operator switches the test receiver between active and neutral lines in order to measure RF emission signals on them originating from ...

Dc power supply and load unit (23/06/2004)

THE new Motech PPS-120X GSM series dual channel dc source/current sink power supply/loads are suitable for testing mobile phone and other battery operated equipment. They are especially suitable for systems incorporating ...

Crystal oscillators (21/06/2004)

WESTEK Electronics has introduced a new series of crystal oscillators, SAW filters and resonators from Aker Technology.

ATX power supply tester (17/06/2004)

THE Prodigit model 3660A multiple output power supply tester available from Westek Electronics is suited to the testing of power supplies with inputs of 115 and 230 Vac, and various ratings, and up to six individual outputs.

Versatile power supply tester (17/06/2004)

THE new Prodigit model 3610A power supply tester available from Westek Electronics is suited to the testing of power supplies with inputs of 115 and 230 V ac, and various ratings to 300 watt and voltages to 60 volts.

Product testing power source (4/06/2004)

CALIFORNIA Instruments, represented by Westek Electronics, has released the LX series of ac power supplies with three-phase ac output. They incorporate PWM switching technology, a high power to weight ratio, and high efficiency ...

15MHz sweep/function generator (2/06/2004)

THE new Motech model FG515 function generator provides a range of waveforms including triangular, square, and sine wave, swept linearly or logarithmetically in the signal frequency range from 0.2Hz to 15MHz. A separate TTL ...

High insertion loss power connectors (28/05/2004)

SCHAFFNER has introduced the ACARA range of high insertion loss connectors suitable for currents to 250A from dc to 60Hz. The ACARA connectors incorporate significant features and benefits including fast mounting, polarised ...

Power sources (17/05/2004)

CALIFORNIA Instruments, represented in Australia by Westek Electronics, has released the LS series of ac power supplies, available with single and three-phase ac output.

EMC-conformance chokes and filters (13/05/2004)

SCHAFFNER RFI-suppression filtering, chokes, feed-throughs, harmonic suppression reactors and filters, available from Westek, provide a complete spectrum of solutions for challenging electrical and electronic environments.

Three-phase filters solve harmonics problems (13/05/2004)

THE new, three-phase MTE MATRIX filters are designed to provide efficient suppression of harmonics for a large range of equipment including variable torque, frequency drives, servo drives, UPS systems, electronic welders, ...

The Ophir model 5037 class A/AB RF power amplifier

RF power amplifiers (16/02/2004)

THE new Ophir model 5037 class A/AB power amplifier from Westek Electronics is ideally suited to immunity and automotive testing as well as other CW duties.

Split core and through-hole dc and ac current transducers (13/01/2004)

THE new Powertek Hall-effect split core and through-hole current transducers are available as dc and rms-indicating (500 and 1000 amp) configurations. The Powertek transducers are easily adapted to a variety of installation ...

Capacitors for high voltage and currents (13/01/2004)

THE new Alcon range is a series of self-healing, aluminium foil/polypropylene dielectric capacitors suitable for high voltage, high current, and high dv/dt applications. These include IGBT protection, snubber networks and ...

Economical, programmable dc power supplies (8/01/2004)

WESTEK Electronics has released the Array Electronics 3600 series of three benchtop dc power supply models with flexible keypad and rotary controls as well as computer interface via RS232 or RS485. Windows-based operational ...

Sinusoidal output filter for inverters (5/01/2004)

SCHAFFNER FN 5010 sinusoidal output filters, available from Westek Electronics, are intended for variable speed drive outputs. The FN 5010 aids the smooth running of motors by virtually eliminating counter-phase harmonics.

Benchtop programmable dc loads (18/12/2003)

WESTEK Electronics has released the Array Electronics 3700 series of two benchtop dc loads with flexible keypad and rotary controls as well as computer interface via RS232 or RS485.

Filters solve harmonics problems (11/12/2003)

THE new, three-phase MTE MATRIX filters from Westek Electronics are designed to provide efficient suppression of harmonics for a large range of equipment including variable torque, frequency drives, servo drives, UPS systems, ...

Microwave SAR-applicable power amplifiers (8/05/2003)

THE new Ophir model 5140/50/60 class A/AB power amplifiers cover the bandwidth range from 700 to 4200MHz, depending on the model chosen. The amplifiers are suitable for the calibration of Specific Absorption Rate (SAR) measuring ...

RF class AB power amplifier (8/05/2003)

THE new Ophir model 5074 RF class AB power amplifier has a bandwidth from 30 to 512MHz, covering the military VHF/UHF bands, and is suited to applications including EW and satellite communications. Minimum linear output ...

Schaffner MD200 probe -- pulses to 7000 volts.

High voltage differential probe (7/05/2003)

THE new Schaffner MD200 high voltage differential probe is suited to verification of voltage surge pulse outputs from EMC test generators. The probe is an essential calibration tool for test generators used in mission critical ...

EFT pulse calibrated attenuator (7/05/2003)

THE new Schaffner CAS 3025 burst/EFT pulse calibrated attenuator can be used in conjunction with oscilloscopes to enable verification of EMC burst and pulse generators. The CAS 3025 meets the requirements of IEC/EN61000-4-4 ...

Up-link solid-state amplifier (6/05/2003)

THE new Ophir model 4012 class A/AB solid-state power amplifier with 250 watt saturated power output, is designed for UHF satellite communications in the frequency range of 290 to 320MHz. The Ophir 4012 has excellent harmonic ...

GTEM cell power amplifiers (6/05/2003)

THE new Ophir model 5039 class A/AB power amplifier is suited to GTEM cell immunity testing. The amplifier covers the bandwidth range from 20 to 1000MHz. A second amplifier, the Ophir model 5150 covers the frequency range ...

Advanced lab device programmer (6/05/2003)

THE new PowerLab programmer with USB interface from Westek Electronics represents a non-compromising marriage of universality, flexibility, reliability, productivity and affordability. The promise of universality is fulfilled ...

High power dc power supplies (2/05/2003)

WESTEK Electronics announces the release of California Instruments’ latest release of high power, high accuracy dc power supplies, the Argantix series. The Argantix XDS power supply system series covers the basic power output ...

EMC immunity test system (23/04/2003)

THE new Schaffner Modula EMC immunity test system is an open-architecture solution to flexible testing.Modula offers Interbus compatibility; Ethernet (TCP/IP) communication; compact test generators; and multi-function instruments.

Compliance with IEC harmonics, inter-harmonics, and flicker emission standards as well as immunity to voltage fluctuation, frequency fluctuation and dc ripple can no longer be avoided for exported products.

IEC compliance testing equipment (20/09/2002)

CALIFORNIA Instruments' MXCTS System offers comprehensive testing to harmonics emission standards IEC 61000-3-12 and IEC 61000-3-2; flicker measurement standards IEC 61000-3-11/3, and immunity testing including voltage ...

Pentium-based EMI measuring receiver (20/09/2002)

THE Schaffner SMR 4518 EMI measuring receiver provides manual as well as fully automatic EMC measurement protocols in the frequency range of 9kHz to 18GHz making it suitable for applications including harmonics measurement ...

Schaffner ESD gun -- for immunity testing to European norms.

Electrostatic discharge simulator gun (23/07/2002)

THE Schaffner model NSG 438 electrostatic discharge gun from Westek Electronics is suited to immunity testing to European Norms. The testing system is therefore practically obligatory for manufacturers and designers of equipment ...

Handheld power analyser (23/07/2002)

THE new handheld Motech MT1010 power analyser from Westek is suited to applications including individual voltage and current harmonics to the 40th order as well as total harmonic distortion. It is also suitable for energy ...

RSS Feed

News sign up |

Collapse Additional Westek Electronics News

News sign up

The Illuminated Vandal Series LP5-V switch from Aerosapce and Defence Products

The Illuminated Vandal Series LP5-V from Aerosapce and Defence Products (26/11/2009)

The Illuminated Vandal Series LP5-V from Aerospace and Defence Products has been designed to provide attractive, lighted position indication for applications in harsh environments, where security and reliability are paramount.

Kontron XMC-ETH2: Robust dual gigabit ethernet mezzanine board from Dedicateed Systems Australia (26/11/2009)

The new dual Gigabit Ethernet mezzanine board Kontron XMC-ETH2 are now available from Dedicated Systems Australia.

NEC Electronics - 3 New 16-bit Low-Power Micro’s for Zigbee RF4CE with 2.4GHz Radio from Soanar (26/11/2009)

NEC Electronics has introduced its three new 16-bit All Flash(TM) Microcontrollers (MCUs) with Embedded IEEE802.15.4-compliant 2.4GHz RF Transceiver for ZigBee(R) RF4CE, available from Soanar.

Endress+ Hauser Australia providing instrumentation for the water desalination plant at Kurnell, Sydney

Endress+ Hauser Australia instrumental in the construction of Sydney Water’s new desalination plant at Kurnell (25/11/2009)

Endress + Hauser Australia were selected to be one of three key members of the main automation alliance to engineer and supply all general instrumentation to the desalination plant at Kurnell.

Impact testing machines from Technical and Scientific Equipment Co

Charpy impact testing from Technical and Scientific Equipment Co (25/11/2009)

Technical and Scientific Equipment (TSE) presents the TE range of Charpy impact testers. There are models available for metals and non-metals, with various accessories for specific test parameters.

RSS Feed

News sign up

Sections

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.

RF field meter covers spectra to 18 GHz

More products from Westek Electronics

Additional Westek Electronics News

Related Articles

Sections