The Neutrix, available from Welding Automation , is the only tungsten grinder with an integrated dust filter.
Following are the features of Neutrix:
- Integrated exhaustion with a replaceable dust filter
- Triple use of the diamond wheel
- Easy to use, combined electrode positioning and locking device
- Grinding electrode as short as 8mm
The storage case along with the moderate weight makes Neutrix suitable for working on site. Neutrix is a portable Tungsten Grinder that is equipped with an integrated dust filter, thereby protecting the operator and the environment against the unhealthy dust produce during grinding the electrode. The filter is replaceable.
Due to the use of an electrode holder, Neutrix is able to grind electrodes as short as 15mm with the standard electrode clamp, with a special electrode clamp as short as 8mm can be ground. The use of the electrode holder also ensures a precise and centred tip. Neutrix is equipped with an inspection cover enabling the operator to see the grinding operation.
Neutrix is easy to operate, set the required grinding angle and secure the electrode into the holder using the locking devise. This system electrode minimises the amount of grinding required. (as little as 0.3 mm removal for each new point.)
Neutrix is equipped with an eccentric plate, which makes it possible to adjust the grinding position on the face of the wheel, and triples the life of the diamond wheel. NEUTRIX is supplied in a case fully equipped for use, with electrode clamps for 1.6mm, 2.4mm and 3.2mm. Tungstens are also included Neutrix is CE marked and is manufactured to meet all EU directives.
Following are the technical specifications of Neutrix:
- Power supply: 110/240V
- Motor: 850 W
- RPM: 28000
- Weight: 2.8 kg