Weidmuller’s ConnectPower switch mode power supply units can add reliability to your power supply.
High levels of efficiency as well as compact dimensions and moderate heat generation are features of primary switch-mode power supplies.
Weidmüller has single and three-phase primary switch-mode power supply units on offer in versions from 25 W to 1000 W.
ConnectPower switch mode power supply units’ first-class price/performance ratio is a compelling benefit.
Depending on the model, the input voltage of the single and three-phase ConnectPower switch-mode power supplies is 115/230 V AC or 3 x 400 V AC. Under maximum load the units achieve efficiency ratings of up to 88%.
The ConnectPower switch mode power supply units reduce harmonic currents through Power Factor Correction (PFC).
In addition to this, the primary switch mode units are equipped with an integrated diagnostics and status output.
An optional signalling contact is implemented as a changeover contact. Each device output is short-circuit proof by design.
The 24 VDC output voltage can be adjusted via a potentiometer across a range of 24-28 VDC. The output is electronically limited to between 105-130 percent.
The ConnectPower switch mode power supply units can easily be operated in parallel by using a special diode module to increase power capacity or for redundancy purposes.
In this case, both switch-mode power supply units operate in parallel with the diode module and share the power drawn by the load.
If one of the units should fail, the second unit provides the full amount of power required.
The diode module decouples the two units 100%; that means that neither of the units can negatively affect the other if a fault occurs.