Home > Non-contact industrial vibration sensor

Non-contact industrial vibration sensor

Supplier News
article image IVS-300 non-contact industrial vibration sensor.

THE Polytec IVS-300 industrial vibration sensor from WARSASH Scientific is an integrated single-box digital vibrometer that was developed for non-contact vibration measurement in production test environments.

The IVS-300 enables fast, accurate product quality monitoring. The device features a solid and compact design, sealed according to IP64 standard to cope with the challenges of harsh industrial areas.

The IVS-300 exploits new digital signal processing techniques to ensure accurate and repeatable measurement. The unit is suitable for non-contact measurement on "difficult" surfaces with poor light scattering characteristics and for the analysis of low vibration amplitudes requiring high resolution.

The IVS-300 can be retrofitted into existing production lines because the laser interferometer optics and electronics are all contained within a single, compact and robust industrial housing.

All range and filter settings are software configured via a serial interface, leaving no risk of accidental changes in key settings on the production line.

Vibration signal output is via an analogue (± 4V BNC), or digital audio interface (S/P-DIF). Frequency response is between 0.5Hz and 22kHz and the IVS-300 features velocity up to ±500 mm/s (three ranges).

Analogue velocity output and digital S/P- DIF audio interface are compatible with VIBSOFT-SP and other acquisition systems support the S/P-DIF standard.

Newsletter sign-up

The latest products and news delivered to your inbox