Superior Industrial Cleaning Solutions by Vicon Aquadrill

By Vicon

Got a Question about this product?

Enquire Now

Visit Website

Cleaning Solutions for Mining, Oil and Gas and Industrial Sectors

Cleaning Solutions for Mining, Oil and Gas and Industrial Sectors

Other Products from Vicon

Control Valve and Process Plant Solutions by Vicon CVS

Bolt Torquing and Tensioning Services by Vicon BT&T

Aqua Milling®, Aqua Lancer™, Aqua Rover™

Industrial Cleaning Solutions
Vicon Aquadrill provides industrial cleaning solutions to the Mining, Oil and Gas and Industrial Sectors. Through its unique advanced technology, Vicon can guarantee improved safety, increased productivity and cost reductions to these industries.

Vicon uses Aqua Milling® technology, the safest and most advanced cleaning technology in the world, to remove any type of scale using only high pressure water.

For large size internal diameter pipe walls, Vicon uses the Aqua Rover™, a self propelled robotic system that uses Aqua Milling® jet cleaning heads designed to remove coatings, corrosion, hard scale or mill scale deposits.

For the purposes of cleaning heat exchangers, Vicon uses the Aqua Lancer™ System, a state of the art air operated rigid lancing system using Aqua Milling® technology.

Aqua Milling®
Aqua Milling® cuts through scale on the inside of pipes using only high pressure water.

Benefits of Aqua Milling®

Fast setup: Access can be through a single point of entry
No dismantling of bends: Utilising a single access point, Aqua Milling® can clean up to 300m, cutting around multiple directional changes so avoiding costly dismantling of pipeline
No dismantling of vertical sections: Aqua Milling® easily drives through both horizontal and vertical sections. Ability to climb vertically 90m from ground level without support from above, using only water pressure
Versatile: Suitable for almost all pipe materials, even plastic and polycarbonates
Environmentally sound: Can completely contain hazardous materials and waste
Safe: Operators are not exposed to any reaction forces from jets, the whole operation being controlled remotely away from the point of access
Efficient: Aqua Milling® utilises the water pressure for descaling, retro or spinning jets are not used to drive and rotate the cutting nozzle
Flexibility: Application works on all scale pipes with diameters between 16mm and 2 metres
Mobility: Aqua Milling® is compact and can provide mobile on site support at any time. The unit is stored in a 20ft sea container making it reliably transportable both onshore and off shore

Aqua Lancer™
Aqua Lancer™ is a semi automated system designed for the cleaning of heat exchanger tubes that utilises a rigid lance mechanically driven in and out of the tubes. This ultra high pressure system is ideal for cleaning hard deposits and badly blocked tubes, safely and quickly.

Benefits of the Aqua Lancer™ System

Allows multiple heat exchanger tubes to be cleaned simultaneously, potentially cleaning > 1,200 tubes per 12 hour shift, depending on scale type
Spring loading prevents bending of lances
Compatible with all lance types: semi rigid, rigid, nozzle mounted
Cleans all exchangers: horizontal, vertical and oblique
Not constrained by direction of entry
Efficient setup and demobilisation times
Unique technology, not available off the shelf
Proven locally and globally to reduce exchanger down time

Aqua Rover™
Aqua Rover™ is a self propelled robotic system that uses Aqua Milling® jet cleaning heads designed to remove coatings, corrosion, and hard scale or mill scale deposits from large size internal diameter pipe walls.

Benefits of Aqua Rover™

Unsurpassed cleaning quality and production rates, with tremendous savings through reduced clean times, manpower and improved process post clean
Homogenous surface cleaning avoids problems with aged or damaged piping
Surface cleaning performed to coating standards uses only water without abrasives or ultra high water pressure
Recycling of water minimises environmental impact with carbon filters included
Connection to a remote controlled high pressure water pump with unparalleled safety and performance capabilities
No jumping or uneven travel caused by pipe bends, corners, rivets or certain configurations
Aqua Rover™ eliminates the need for personnel to enter the piping during cleaning operations
Video monitoring can be supplied during the cleaning process to ensure performance and provide monitoring and inspection

Got a question about this product

More information about this product

Contact Details

More Products By Vicon

Control Valve and Process Plant Solutions by Vicon CVS

To achieve optimum control valve performance from existing and new control valves. Pioneering the way forward for true control valve diagnostic testing, Vicon Control Valve Solutions offers a two fold approach to this ...

Enquire Now

Bolt Torquing and Tensioning Services by Vicon BT&T

Vicon’s experienced technicians determine bolt tension for each bolt, considering aspects such as manufacturer’s specifications, material, grease, bolt location and ongoing pressure. All of this combined, works out the ...

Enquire Now

Contact Vicon

By sending this enquiry you will also be informed of other related opportunities.

* First Name

Surname

Phone

* Your Email

State

Message

Be the first to know about new products, services and developments. Send me Ferret's newsletter.

Get new security code

* does not match

Send Enquiry

News sign up

Vicon News

Aqua Milling by Vincon (30/06/2009)

Aqua Milling cuts through scale on the inside of pipes using only high pressure water. Aqua Milling is an innovation that significantly reduces downtime and total job costs.

RSS Feed

News sign up

Sections

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.