Vek Tools introduces new Protool Quad Drill machine
Protool Quad Drill equipment
Vek Tools has introduced new Protool Quad Drill equipment.
Drill:
Powerful: makes drilling easy
Strong and robust – these are characteristics of the “20” range of Protool drills.
The 1100 w motor comes into its own when drilling larger holes in wood and steel.
In addition, the multi-stage gears, stronger shaft and robustly shaped spindle bearing are designed to guarantee a longer service life so you can enjoy working with this machine even longer under tough conditions.
Screwdriver:
Compact: powerful fastening
Press the orange button on the chuck and pull the chuck off – and it is done. You now hold the most lightweight, compact and handy screwdriver in this performance class. Lighter by 0.7 kg and shorter by 73 mm – this should convince everyone.
This high-power tool with a torque of 98 Nm is a compact design, with the tightening stem chuck in the spindle. You can use this quickly and easily for soft tightening in wood: screws up to 12 mm (no pre-drilling required), screws to be tightened with DIN 571 key up to 16 mm, and pin-type screws up to 12 mm.
Angle screwdriver:
Lack of space is not a problem for the angle screwdriver. You can just lock a special angle adapter on the screwdriver head, secure it with a chuck lever and your angle screwdriver is ready to go.
For awkward and hard-to-reach jobs, just adjust the angle adapter to the position you need. This ease of operation, together with high torque, makes those difficult jobs simple
Multiple usage: including drilling around corners
Just place the FastFix chuck on the angle adaptor spindle and push it until it clicks into position, your angle drill is ready.
Now you can drill any hole in hard-to-access areas with no problem, regardless of your drill bit (auger, twist, ZOBO or hole saw). And it is up to you whether to use the single (high-torque) or dual-speed (high speed) drill.
20-Jun-2007