Home > New version data storage adapter available from Veederline

New version data storage adapter available from Veederline

Supplier News
article image RISH multi SI 232 data storage adapter

Veederline ’s storage adapter RISH multi SI 232 which is attachable to the hand-held Rishmulti series multimeters permits direct transmission of measured data of a single or several RISH multi to a PC as well as on-site data storage without PC and their later transmission to
the PC.

The data is synchronised by a integrated clock. Memory: 128kB (corresponds to approximate 100000 measurement Values).

Application / function:

Sampling:

Sampling is dependent upon the selected signal hysteresis setting. This sampling method results in an expansion of virtual memory, which is dependent upon measurement signal dynamics and the selected signal hysteresis.

Thus storage capacity can be substantially increased (10 to 100-fold) With a selected sampling rate of up to maximum 500 ms. an arithmetic mean value is ascertained for the measurement values which are received at a pulse rate of 50 ms.

Within a range of 1 s to 60 s, the signal sampling rate remains at a constant 500 ms (10 measurement values).

The integrated closed-circuit system causes the storage module to enter the standby mode for the remainder of the sampling cycle after signal acquisition is complete, and thus lengthens battery service life.

Signal acquisition is interrupted during the rest period for this reason. Thus the functional principal can be compared to that of point recorder.

Interface packs:

An interface pack can connect one or more RISH multi S Meters with a PC. It contains all hardware and software components required to configure a PC measurement system.

Four-channel storage pack:

  • 1 Storage adapter SI 232
  • 1 RS-232 bus cable, 1.5 m long
  • 1 Rishcom 100 program disk 3 ½ “ 1.44 Mbyte
  • 1 copy of instruction manual of Rishcom 100.

Four-channel storage pack:

  • 4 Storage adapters SI 232
  • 1 RS-232 bus cable , 2 m long
  • 1 Rishcom 100 program disk 3 ½ “ 1.44 Mbyte
  • 1 copy of instruction manual of Rishcom 100.

Differentiate features:

Configuration of a multi-measurement system (on-line and off-line):

To configure a powerful multi-measurement system up to six RISHmulti SI 232 can be interconnected and connected to a PC on-line via a standard interface cable (RS-232C) and/or up to ten devices can be operated off-line.

Each adapter can manually be provided with a specific contact address.

Newsletter sign-up

The latest products and news delivered to your inbox