ValvesOnline
Cnr Lytton and Ramsay Rds
Hemmant QLD 4174
Tel: 1300 887 880
Fax: 07 3890 3133

Supplier´s Website
Enquire now

Incorrect details?

close

Enquire NowVisit Website

Contact Details

Water solenoid valve

VALVESONLINE supplies fully interactive technical details and shopping facilities for a wide range of valves in air, fluid, vacuum, chemical and steam. Two ranges of water solenoid valves are available - the series B45. They range from 1/8" to 6" with body materials in plastic, brass and stainless steel.

The B45 brass valves are easily available online.

The water solenoid valves are available in port sizes from 1/4" to 3" Bsp or flanged from 80mm to 150mm nominal bore with a cast iron body. With a low differential, the B45 brass valves are suitable for water and air up to 16 Bar/235psi and has optional manual override. They available with normally closed NC or normally open NO function, with standard in EPDM for hot water with optional NBR or FKM.

The series B55 has a coupled diaphragm for zero differential to operate on tanks and other applications including vacuum where these is little or no line pressure or up to 10 Bar/150psi pump pressure. They are available in sizes from 1/4" to 2" Bsp.

Standard voltages for the water solenoid valves are 240, 110, 24V AC/24V and 12V DC. Orifice sizes for the valves are 3, 4, 5, 6, 8, 15, 20, 25, 35, 50mm diameter. Exm explosion proof coils and Exd flame proof housings are also available with Australian ratings, including DIP dust and ignition proof for the water solenoid valves.

ValvesOnline News

Chemical solenoid valve (28-Jul-2005)
VALVESONLINE has a range of chemical solenoid valves for acid and alkali corrosive fluids. The chemical solenoid valve is media-isolated. A solid PTFE body and PTFE-coated FKM diaphragm are the only wetted parts.

Butterfly or ball valve electric actuator (25-Jul-2005)
ValvesOnline has a range of quarter-turn electric actuators suitable for ON/OFF activation of ball or butterfly valves. A powerful motor with inbuilt thermal protection in the electric actuator drives a pre-lubricated heavy duty steel gear train running in bearings.

Steam solenoid valve with a brass body and PTFE seats (11-Jul-2005)
VALVESONLINE has released a steam solenoid valve with a brass body and PTFE seats. It is suitable for saturated steam up to 10 bar and temperatures to 180°C. It can handle oils up to 200°C and 50 cst.

RSS Feed

Related Articles

Eximo YellowBelly modular ducting solutions for heavy duty industrial applications (21-Nov-2008)
YellowBelly modular ducting from Eximo is suitable for the suction and conveyance of liquids and materials especially in sanitary and sewer pumping and heavy-duty industrial applications. Its polyethylene construction makes it light weight and adaptable to high vacuum applications, while still offering full crush recoverability.

Vehicle exhaust fume reels available from Polex (12-Nov-2008)
Polex have recently supplied and installed a fume extraction system at Alcoa of Australia in Western Australia. Vehicle exhaust fumes are both harmful to the health of operators and harmful to the environment.

DDK Commercial Interiors Commission Australian Dust Control to install Reverse Flow Dust Collector (11-Nov-2008)
Australian Dust Control help manufacturers to maximise energy efficiency and reduce energy costs with the installation of Reverse Flow Dust Collector. DDK Commercial Interiors have commissioned Australian Dust Control to design and install a Reverse Flow Dust Collector.