Traxx Construction Products
presents the Traxx RSP 90 bevelling machine for use by professional contractors.
Bevelling machines are required to chamfer the edges of joints before sealants can be poured in so that the joint edges do not break off under the load of traffic.
Traxx RSP 90 bevelling machines use two diamond bevelling disks to bevel joints up to 30mm wide. Moving on rollers, which are in line with the cutting shaft during operation, the RSP 90 ensures a smooth bevel depth even on uneven surfaces. A hand crank adjusts the height of the roller guide to set the bevelling depth.
An additional linkage with bottom rollers allows the machine to travel between two joints. It raises the roller guide off the ground and is controlled by the hand crank within the operator’s reach, helping to maintain the bevel depth when moving the equipment.