Safetech goods hoists/goods lifts, available from Total Lifting Solutions , transfer goods between different heights and floors. Safetech goods hoists are available in two model ranges, column (rail) mounted or scissor lift. Both models can be installed as either freestanding or fitted into an existing shaft and have the following benefits:
- Column lifts can be 1, 2 or 4 pallet capacity
- Scissor lifts can carry up to 10 pallets
- Comply with Australian design standards
- Available with multiple door configurations
- Safetech control board provides maintenance and diagnostic feedback
Scissor lift goods hoists/goods lifts are also available from Total Lifting Solutions. These lifts use a scissor mechanism to support the platform and a hydraulic power unit to elevate it. Scissor goods hoists/goods lifts have the following advantages:
- Large capacity - up to 10 pallets
- Robust design
- Custom deck sizes available
- Cost effective
Scissor goods hoists/goods lifts have the following disadvantages:
- Need deeper pit
- Unsuitable for small lift footprint
- Coloumn/rail mounted goods hoists/goods lifts available from Total Lifting Solutions use
- a column mounted to the freight hoist skeleton to attach and elevate the lifting platform
Coloumn mounted goods hoists/goods lifts have the following advantages:
- Suitable for smaller footprints
- Minimal pit requirement
- Design allows external or internal installation
- Low cost Coloumn mounted goods hoists/goods lifts are not suitable for loads higher than four pallets
Goods hoist have the following applications:
- Warehouses
- Distribution centres
- Factories
- Car dealerships
- Self storage
- Mezzanine floors