Temperature Controls launch Tego range of modular plug in temperature sensors
Tego range of modular plug in temperature sensors
have released their Tego range of modular plug in temperature
sensors.
The Tego range has been developed as a flexible temperature sensing system that allows a customer to use plug in thermocouples or RTD sensors with or without 2 wire 4 - 20mA transmitters fitted into the sensor stem body eliminating the need for a terminal head.
The connector system allows the customer to change a temperature sensor on a process line without the need to disconnect or reconnect wiring. Utilising a standard DIN 43650 3 pin and earth connector allows the Tego range to maintain IP65 protection rating.
This Tego connection system allows for temperature probes to be removed for calibration testing or replacement with a minimum of interruption to the process and complete safety as the operator does not have to use electrical tools.
The Tego modular system also allows for the fitting of a compact 2 wire loop powered multi input transmitter that can accept all the thermocouple and RTD inputs available in Australia; the transmitter is easily programmed using a Hart Protocol modem connected to a computer.
The DIN 43650 connector allows for the fitting of an optional loop powered LED digital display, this display is also IP65 protection rated, with a bright 7mm high LED display that can be rotated to suit the application and then scaled into engineering units with an adjustable decimal point.
1-Sep-2008