Temperature Controls introduces INOR IPAQ-C201 temperature transmitters
INOR IPAQ-C201 temperature transmitters
Temperature Controls has introduced INOR IPAQ-C201 to the Australian market; a new range of temperature transmitters in the IPAQ family from INOR.
The IPAQ-C201 is an analogue, PC-programmable, 2-wire, in-head transmitter for Pt100 input.
Features:
- Input 2/3 wire PT100 OHM
- Low cost 4-20 mA - output
- Programmable
- Accuracy +/- 0.1ºC
- Ambient range 0/100% RH - 0/85ºC
- Vibration 10g
Three different Pt100 standards can be chosen as well as 2- or 3-wire connection with a minimum span of 20 degrees C.
The 4-20 mA output signal is temperature linear and the accuracy is specified to ±0.1 °C or ±0.1 % of span (whichever is greater).
Matching the IPAQ-C201 transmitter to a calibrated temperature sensor can be easily performed by entering the sensor errors into the low and high ends of the measuring range.
The IPAQ-C201 is produced in a new moulded housing to suit 33 mm centre terminal heads, this IP65 housing is suitable for use in 100% RH and 85 Deg C operating conditions and guaranteed for 10 g vibrations.
The robust terminals are equipped with test connections and contained screw terminals.
Compared to conventional analogue transmitters, the IPAQ-C201 needs no calibration after the range setting from PC.
Programming may be configured without external power, just connect the programming lead to a PC’s USB port to edit or read the transmitter settings.
31-Jul-2007