Telford Smith Engineering

Telford Smith Engineering
19 Fiveways Boulevard
Keysborough VIC 3173
Tel: 03 9798 6200
Fax: 03 9798 6299

Supplier´s Website


Incorrect details?

close

AdvertiseVisit Website

Contact Details

Single and twin screws from Telford Smith Engineering

Telford Smith Engineering  are manufacturers of single and twin screws. They not only make replacement screws but also recondition existing screws used for induction moulding and blow moulding. The screws manufactured by Telford Smith Engineering are also used in extruders.

The services from Telford Smith Engineering cover all aspects of the extrusion industry, from thermoplastics to synthetic and natural rubber. Each specific aspect of the extrusion industry has a specific design engineered for optimum performance. The designs are varied depending on the application and include specific designs for single flight metering screws, single barrel and double barrel screws. For vented extruders Telford Smith Engineering provide special two stage screws.

At Telford Smith Engineering, different materials are used to manufacture screws. Generally screws are nitrided or hardened and nitrided. When abrasive materials are used Telford Smith Engineering make tungsten carbide coated screws. When highly corrosive materials like fluoropolymer are used, the screw is manufactured using duranickle for optimum operation.

Telford Smith Engineering’s wide variety of screws is available in different designs and specification with capacities ranging from 25mm upto 200mm.

Telford Smith Engineering News

RSS Feed

Related Articles

Outotec FloatForce technology proves lower energy consumption (4-Dec-2008)
Outotec’s new rotor and stator design, FloatForce, extends the maximum air feed limit. As a result, the cell surface is steady in all situations and the pumping rate of the mechanism is only slightly affected by air. Because of the flat power curve, less power is needed when the mechanism is operated with little or no air. This allows smaller motors and benefits both in investment and operating costs.

Maxon Motor manufacture zirconium oxide ceramic dental implants (2-Dec-2008)
Maxon Motor have 15 years of experience in developing and producing precise technical components using high-performance ceramics materials. Maxon Motor are now employing their expertise to manufacture zirconium oxide ceramic implants for the dental market.

DECS 50/5 controller for driving brushless DC motors from Maxon Motor (1-Dec-2008)
The DECS 50/5 (Digital EC Controller Sensorless), available from Maxon Motor, is a new controller for driving brushless DC motors without Hall sensors. Typical sensorless drives such as pumps and fan applications can now easily be created due to modern technology and expert integrated controlling algorithms.

EC16 brushless DC motor available from Maxon Motor Australia (28-Nov-2008)
The new EC16 motor developed by Maxon Motor Australia is a brushless DC motor. The EC16 brushless DC motor is 16mm in diameter and has a length of 56mm, bringing a power rating of 40Watt. Its power rating is due to the optimised winding technology that results in less eddy current losses.

ZP D 43 Electronic Wheel detection equipment available from Siemens (27-Nov-2008)
Siemens will launch their latest innovation in mobility safety and productivity solutions, the ZP D 43 Electronic Wheel detection equipment for rail networks at this year’s AusRail Conference that is to be held at the Melbourne Exhibition and Convention Centre in December.