Telford Smith Engineering

Telford Smith Engineering
19 Fiveways Boulevard
Keysborough VIC 3173
Tel: 03 9798 6200
Fax: 03 9798 6299

Supplier´s Website


Incorrect details?

close

AdvertiseVisit Website

Contact Details

Extrusion lines and equipment from Telford Smith Engineering

Telford Smith Engineering  manufacture extrusion equipment. Telford Smith Engineering not only provide Single and Twin extruders but also offer complete extrusion lines. Telford Smith Engineering produce pipes, profile, film or wires and cables as per clients’ industrial needs. Extruded sheets and fibres also form a part of the products offered by Telford Smith Engineering.

The extruders from Telford Smith Engineering have customised bases with sufficient rigidity and precise alignment. They can be fabricated to suit the factory layout and any other specifications.

Technically-sound screws form the base of the extruders. Telford Smith Engineering have developed different screw designs to meet individual and specific requirements. They produce both conventional screw designs as well as special application screws according to requirements.

Each major component of the extruder, whether it is the basic barrel, the barrel vent or the head clamp, is designed with precision and the necessary engineering principles. The feed section and the feed hopper are available in different designs and sizes. At Telford Smith Engineering, care is taken to optimise the functioning of the gear box, the main drive motor and the control cabinet. Each extruder is guarded for safety and ease of application.

Telford Smith Engineering News

RSS Feed

Related Articles

Outotec FloatForce technology proves lower energy consumption (4-Dec-2008)
Outotec’s new rotor and stator design, FloatForce, extends the maximum air feed limit. As a result, the cell surface is steady in all situations and the pumping rate of the mechanism is only slightly affected by air. Because of the flat power curve, less power is needed when the mechanism is operated with little or no air. This allows smaller motors and benefits both in investment and operating costs.

Maxon Motor manufacture zirconium oxide ceramic dental implants (2-Dec-2008)
Maxon Motor have 15 years of experience in developing and producing precise technical components using high-performance ceramics materials. Maxon Motor are now employing their expertise to manufacture zirconium oxide ceramic implants for the dental market.

DECS 50/5 controller for driving brushless DC motors from Maxon Motor (1-Dec-2008)
The DECS 50/5 (Digital EC Controller Sensorless), available from Maxon Motor, is a new controller for driving brushless DC motors without Hall sensors. Typical sensorless drives such as pumps and fan applications can now easily be created due to modern technology and expert integrated controlling algorithms.

EC16 brushless DC motor available from Maxon Motor Australia (28-Nov-2008)
The new EC16 motor developed by Maxon Motor Australia is a brushless DC motor. The EC16 brushless DC motor is 16mm in diameter and has a length of 56mm, bringing a power rating of 40Watt. Its power rating is due to the optimised winding technology that results in less eddy current losses.

ZP D 43 Electronic Wheel detection equipment available from Siemens (27-Nov-2008)
Siemens will launch their latest innovation in mobility safety and productivity solutions, the ZP D 43 Electronic Wheel detection equipment for rail networks at this year’s AusRail Conference that is to be held at the Melbourne Exhibition and Convention Centre in December.