Product News

Soanar - Electronic Component & Supply Chain Solutions
9 Civic Sq
Croydon VIC 3136
Tel: 03 9724 0888
Fax: 03 9724 0878

Supplier´s Website
Enquire now

Incorrect details?
Enquire NowVisit Website

New version LED driver available from Soanar



LT3595 LED driver

The LT3595 from Linear Technology is a high performance LED driver designed to drive 16 independent channels of up to ten LEDs at currents of up to 50mA. Series connection of the LEDs provides identical LED currents, resulting in uniform brightness.

A single external resistor sets the LED current for all 16 channels and dimming is controlled for each channel by pulse width modulating the individual PWM pins.

Relative current matching among the 16 drivers is 8% and the PWM dimming range is 5000:1.

Using appropriate external components recommended by Linear Technology Corporation, the LT3595 can drive a 10-LED string down to 15mA LED current while operating in continuous conduction mode.


The LT3595 available from Soanar can accommodate input supply voltages between 4.5V and 45V and achieves a typical efficiency of 92%. It is supplied in a 5mm x 9mm x 0.75mm 56-pin QFN package.

Features:

  • 16-channel buck mode LED driver
  • 4.5V to 45V input supply range
  • Up to 50mA LED current per channel
  • 100mA, 45V internal switches
  • 8% relative LED current match at 20mA
  • 5000:1 true colour PWM dimming range
  • LEDs disconnected in shutdown
  • Internal Schottky diodes
  • Low quiescent current
  • 2MHz switching frequency
  • Pin-selectable master LED current
  • Typical efficiency 92%
  • Open LED detection and thermal protection
  • 56-pin 5mm x 9mm x 0.75mm QFN package

Applications:

  • LED video billboards
  • LCD televisions
  • Stadium and advertising displays

4-Dec-2007

Contact Soanar - Electronic Component & Supply Chain Solutions

Name:
Company Name:
Contact Number:
Email Address:
Your State:
Your Message:

Please uncheck this box if you don't want to receive the latest product updates in Ferret Daily Product News, Ferret's daily eNewsletter.

does not match
 
Your contact details will be passed onto this company ( see our Privacy Policy )
More Articles

Soanar - Electronic Component & Supply Chain Solutions News


The MultiLED Osram MultiLEDs available from Soanar (4-Dec-2008)
Osram Opto Semiconductors have launched two new MultiLEDs for different LED video displays, which are available from Soanar. The new MultiLED in the jet black package has been developed specially for high-resolution displays.

The Ceramos Soanar distribute Ceramos and Oslux LED from Osram (3-Dec-2008)
The new generation of Ceramos and Oslux LED flash products from Osram Opto Semiconductors, distributed by Soanar, are twice as bright as their predecessors. The brightest LED without a lens for flash photography is the Ceramos.

Han HC 350 high voltage contacts Harting’s crimp version HC 350 high voltage contacts available from Soanar (2-Dec-2008)
HARTING, distributed in Australia and New Zealand by Soanar - Electronic Component & Supply Chain Solutions, have extended the Han Connector product range, the HC 350 contact, which comes with a rating up to 350 Amps, 2Kv and 4Kv with an adaptor.

The Bus coupler for modular, decentralised LioN-Link System with PROFINET Interface New Bus coupler for modular, decentralised LioN-Link System with PROFINET Interface available from Soanar (7-Nov-2008)
Lumberg Automation, represented in ANZ by Soanar, have developed a new bus coupler with PROFINET interface for the modular, decentralised LioN-Link system. This bus coupler has an integrated switch which enables PROFINET network wiring in PROFIBUS network line topology.

HARTING’s new range of products for telecom outdoor solutions HARTING’s new range of telecom solutions for outdoor environments available from Soanar (6-Nov-2008)
HARTING, whose products are distributed in ANZ by Soanar, have extended the Han Connector product range that includes the integration of the standard LC fibre optic connectors both in single mode and multi mode. These products meet the demands set by harsh outdoor environments.

News Sign up View all  |  RSS Feed

Related Articles

Australian Forklift Training warn on the dangers of the rear end swing of forklifts (4-Dec-2008)
Rear End Swing’ as WorkCover refer to it, is responsible for a majority of damage caused to racking, products and machinery. In the current forklift theory test, one of the questions that applicants must answer correctly to get their licenses is: Why is “rear end” swing dangerous on forklift trucks fitted with rear end steering?

Australian Forklift Training highlight common causes for forklifts tipping over sideways (3-Dec-2008)
According to Australian Forklift Training, most sit down (counter balance) type forklifts have a narrow wheel base and can easily be tipped over sideways. Several forklift operators have no idea how close their bad driving habits bring them to tipping the forklift over. A number of accidents where forklifts roll over are caused by forklift drivers trying to turn the forklift a little faster than they usually do.

Australian Forklift Training suggest cross stacking of bagged goods on pallets (2-Dec-2008)
Australian Forklift Training note that in the current forklift theory test, one of the questions that applicants are expected to know is the question of ‘How should bagged goods be transported and stored?’ The answer according to WorkCover is ‘Bagged goods should be transported and stored on pallets. Bags should be cross stacked and stepped (pyramid shaped) above 1.5 metres’.

Australian Forklift Training focus on the common causes for forklifts tipping over forward (1-Dec-2008)
Australian Forklift Training observe that when a forklift tips forward, the back wheels keep lifting off the ground until either the forks hit the ground or the load falls off. The higher that the forks are off the ground, the further the forklift will tip until it comes to a sudden stop. If it tips forward and the load falls off, the back wheel will come crashing back down to the ground.

Australian Forklift Training discuss standard procedures for forklift operators (28-Nov-2008)
According to Australian Forklift Training, the standard procedure that forklift operators should follow when a fault is noticed with a forklift is to remove the ignition key, put an out of order sign or tag on it, and report the fault to the supervisor.

Access over 2000 Manufacturing and Operations jobs online!