Snaptec Australia, specialist in power conversion is introducing a new 5KVA inverter charger or industrial UPS.
The new Quattro 5KVA inverter charger has two AC inputs with integrated transfer switch. The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators or AC mains and generator. The industrial UPS will automatically connect to the active source.
The Quattro 5KVA inverter charger also has two AC output, the main output has no-break functionality.
In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on one of the inputs of the Quattro. Uncritical loads that should not discharge the battery can be connected to this output.
The Quattro industrial UPS can be connected in parallel for increased power, up to 6 units can operate in parallel.
Six units of the 24/5000/120 model, for example, will provide 25kW / 30kVA output power and 720 amps charging capacity.
For even greater increased power multiple Quattro industrial UPS units can be connected to produce a 3 phase AC output, with up to 6 units per phase, giving a total power capability of 90KVA / 75KW.
The Quattro 5KVA inverter charger provides computer monitoring and control facility, with full software backup.
The main application for this inverter charger is mainly when a high reliability AC back up system with a long backup time is required.
The Quattro is designed to operate with lead acid batteries, the built in charger is a highly advanced charger designed to keep the lead acid battery in optimum status. Available in three versions: 12VDC, 24VDC and 48VDC versions.