Sheetmetal Machinery Australia provides an innovative range of steel brushing machines developed by Lissmac. These machines are for the efficient removal of the oxidisation layer on laser cut sheet metal, edge rounding and deburring of steel and sheet metal and reciprocal deburring and edge rounding of laser and plasma oxy fuel cut parts. The Lissmac Steel brushing machines are of low cost, easy to use and are associated with short term return cycles with good price performance ratio.
Automatic steel brushing machine removes oxide film from laser cut sheet metal parts up to 20mm in thickness from inner and outer contours in only one step. With the removal of rust, scale and dirt, surface quality is improved without removing protective oil film.
A total of four counteracting brushing belt units brush plates and sheets on all sides simultaneously. Sheets are brushed on both sides at the same time, which saves time, flipping of sheets or processing parts twice. The SBM-B has a passing width of 1000mm or 1500mm, variable feed speeds and sheet thickness adjustment.
The Lissmac SBM-S comes with deburring and edge rounding of steel, sheet metal and plate parts, up to 20mm in thickness on both sides and edges in one pass. The Lissmac SBM-S will even deburr sheet covered in protective film without damaging the film.
This automated system is easily operated by a single operator saving up to 60% on labour costs. The sheet thickness and belt positions are set in seconds with a separate hand wheel and scale. The Lissmac SBM-S has a passing width of 1000mm or 1500mm and consists of four unique grinding belts that work on sheets from 1mm up to 20mm and are available in 60 to 120 grit.
The Lissmac SBM-GS has reciprocal deburring and edge rounding of laser, plasma and oxy fuel cut parts up to 120mm in thickness, on both sides, in just one pass.
Four brushing belts and four unique grinding belts move perpendicular to the feed direction, optimizing the utilization of the abrasive media. Each working module can be individually engaged, adjusted and configured to your application. The Lissmac SBM-GS has passing widths of 1000mm and 1500mm and offers infinitely variable feed speeds and NC controlled sheet thickness and grinding medium adjustment.