Scitech
SciTech offers products and systems in the area of imaging and analysis for the biomedical, physical science and industrial markets. They offer a wide range of scientific cameras, camera accessories and illumination systems, microscopy systems, atomic force microscope systems, microscope couplers, motorization stages and filter wheels, imaging, visualization and analysis software including fully configured scientific PC and Mac workstations.
Their ... + View more
Their ... + View more
03 9480 4999
Contact Scitech
Your Email
* indicates mandatory fields.
Products
Scitech
SciTech’s range of high speed cameras can help you understand the motion of subjects that move too fast for the human eye to see. These cameras can capture a sequence of images within a very small amount of time and can be played back at a slow rate of speed to understand the subject captured. High speed digital cameras
SciTech’s high speed digital cameras capture up to tens of thousands of frames per second
Ultimate in image quality for high speed imaging applications
Double triggered exposures
Ultrafast framing rates High speed cameras for a range of industrial applications
High Speed Particle Image Velocimetry (PIV)
Short time physics
Explosives testing
Monitoring product jams
Spray analysis
Hyper velocity impact studies
Automobile crash tests
Material testing
Tensile tests
Airbag inflation
Fast flow visualisation
Spray imaging
Hydrodynamics
Fuel injection
Combustions imaging
Semiconductor quality control
Fast events in nature and machine
Super slow motion movie clips
Ballistics Highest resolution thermal imaging cameras
SciTech’s thermal imaging cameras are high performance, high resolution, mobile thermographic cameras. These are the world's first thermographic cameras with megapixel resolution, outstanding measurement quality and razor-sharp thermograms.
Uses opto-mechanical microscan technology feature with the RE mode and take thermal images of a geometric resolution
Up to 1,280 x 960 infrared pixels
High-precision lenses
Ideal for thermographic measurements in the lab or in industrial environments
Cooled photon matrix detectors based on a variety of technologies and formats, frame rates within the kHz range
Extremely high thermal resolutions
A must-have for fast process visualisation, Lock –In Thermography and R&D applications
Efficient and universally applicable tool Thermal imaging cameras
These cameras are ideal for challenging thermal measurements in various applications including:
Preventive maintenance via process optimisation
Quality assurance
Component optimisation up to thermography SciTech's single image will provide 16 times the image information of a traditional thermal camera, thus effectively preventing geometric measuring errors.
Scitech
SciTech stock the best selection of superior digital imaging solutions including digital cameras for the scientific and industrial sectors
Highest quality images with scientific digital cameras from SciTech
All cameras feature state of the art communications, utilising USB2, Gig Ethernet, Firewire or Firewire b (800 Mbit/sec) interfaces
Capture images up to tens of thousands of frames per sec
Superior image quality, utilising CCD,s , ICCD’s, EMCCD’s, CMOS sensors with Resolutions from 640 x 480 up to 12 Mega Pixel
The latest Scientific sCMOS cameras are now available from Scitech
Scientific and industrial digital cameras for a range of applications SciTech offers the largest range of Digital Imaging Solutions for scientific and industrial applications:
Microscopy
Computer imaging
Data acquisition
Image analysis and processing
Test and measurement
Security surveillance
Automated inspection
Microscope Cameras
SciTech is the leading Australian supplier of high quality megapixel and USB firewire cameras for microscopy
These include megapixel high resolution colour and mono cameras, ultra high sensitivity and low noise for low light, fluorescence applications
These include the SPOT digital cameras from Diagnostic Instruments, QImaging, Jenoptik, Lumenera, Optronics, Pixelink
Scientific cameras
Scitech also offers a large range of High Sensitivity, High resolution, Thermal, X ray and spectroscopy cameras
These include EMCCD, CCD, ICCD, XRay, Near Infrared and Thermal cameras
Many applications which include low light imaging, microscopy, high speed, thermal imaging, surveillance and PIV
Industrial cameras
Scitech represents the Hitachi Densi and Pixelink industrial camera ranges
Interfaces include firewire, firewire 800, GigE, Cameralink and USB2
All ranges include both CCD and CMOS cameras
High Resolution up to 6.6 Megapixel
SciTech's wide range of high quality cameras make them the ideal choice for all scientific and industrial camera needs.
Videos
Click thumbnail to watch video
pco – Dimax CS Crash Test High Speed Camera System
News
Supplier news
11/10/18 - Scitech presents the ct-dSPIM by ASI Imaging, designed to image various
cleared tissue samples from whole mouse brains as well as slices of cleared
tissue. The ct-dSPIM is a flexible and easy-to-use implementation of Selective
Plane Illumination Microscopy (SPIM) that allows for dual views (d) of large
samples such as cleared tissue (ct).The ct-dSPIM is one of many light sheet microscope configurations
possible using ASI’s modular components. ASI manufactures the opto-mechanical
elements, including the motorised stages and 2D galvos for creating and moving
the light sheet. ASI partnered with Special Optics to develop an objective
optimised for light sheet imaging of cleared tissue. Lasers and sCMOS cameras are required to complete the system, and may also
be purchased from Scitech.Two objectives are placed at right angles above a sample mounted
horizontally in an open dish, each objective 45° from the vertical. A light
sheet is created from one objective and imaged using the other objective. A
stack of images is collected by moving the light sheet through the sample; in
the case of ct-dSPIM, the sample is normally moved through a stationary light
sheet using the XY stage. For some applications, the 3D information from a single view or stack is
sufficient. For dual-view systems, the role of the two objectives is reversed
to collect another stack from a perpendicular direction. The two datasets can
be computationally merged to yield a 3D dataset with isotropic resolution; the
usual problem of poor axial resolution is overcome by information from the
other view.The ct-dSPIM offers image acquisition >10^8 voxels/sec; sub-micron
resolution in XYZ (sample-permitting); sample mounting in open dish; image
>5 mm deep into flat samples or up to 12mm radius sphere; media RI range
from 1.33 to 1.56, aqueous or organic media; and a modular and flexible setup.For more information, please visit the Scitech website www.scitech.com.au or call (03) 9480 4999.
Supplier news
08/10/18 - Scitech introduces the new BrixXHUB high power laser combiners by
Omicron Laserage.Featuring a compact and rugged design, the BrixXHUB high power laser
combiner can be equipped with up to 5 DPSS or diode lasers of different
wavelengths (two of the same per wavelength are possible). Wavelengths between
375nm and 808nm and optical output powers up to 2500mW per laser line can be
installed.Key features of the BrixXHUB high power laser combiners include free-space
emission or fibre coupled output; optional internal speckle reducer to suit laser
wide-field applications such as super-resolution microscopy or high-speed machine
vision; and USB and RS 232 interfaces of each laser ensuring easy installation into
new or existing setups.Each BrixXHUB laser combiner is delivered with the Omicron Control
Center (OCC) – Laser Control Software. This software is able to control
multiple lasers and offers a Master section, which enables parallel control of
all lasers.The BrixXHUB laser combiners find use in wide-field super-resolution
microscopy (PALM, STORM, SIM); Raman spectroscopy; high-power RGB applications;
optogenetics; test and measurement; and machine vision.For more information, please visit the Scitech website www.scitech.com.au or call (03) 9480 4999.
Supplier news
03/10/18 - Scitech introduces the new Atlas Series Czerny-Turner monochromator
spectrographs by Camlin Photonics.Featuring focal lengths from 150mm to 750mm and multi-grating turret
design, the Atlas Series can provide the appropriate system for low, medium and
high resolution spectroscopy applications.The highly customisable Atlas Series monochromators allow choice of
spectral range and resolution appropriate for the application. At the shorter
focal lengths, they provide a cost-effective tool for low to medium resolution
spectral analysis or tuneable light sources, while the longer focal length
instruments provide the resolution needed to robustly conduct high precision
measurements in areas such as photoluminescence and laser fluorescence.Key features of the Atlas Series monochromators include focal lengths of
150mm, 300mm, 500mm and 750mm; high precision wavelength accuracy and
repeatability; choice of slit and port configuration on both inputs and outputs;
interchangeable grating turret on precision kinematic mount; extensive range of
high quality gratings; user-friendly software configured for all available
accessories; full range of accessories available including motorised slits,
shutters, filter wheels etc.; and double and triple configurations available.For more information, please visit the Scitech website
www.scitech.com.au or call (03) 9480 4999.
Supplier news
27/09/18 - Scitech introduces the QuVi SPIM, the latest addition to Luxendo’s range
of light sheet microscopes. Combining dual views with dual detection channels, the
QuVi SPIM enables large-scale imaging of living samples.The QuVi SPIM light sheet microscope finds application in imaging of living,
fixed and cleared brain slices, long-term imaging of 3D cell culture models
(spheroids, organoids, tumoroids), imaging of conventional cell culture in high
throughput, and even functional (e.g. calcium) imaging.Key features of QuVi SPIM light sheet microscopes include use of
SBS-format plates facilitated; quick-load feature boosting user-friendliness
and sample accessibility; exchangeable objective lenses allowing a wide variety
of samples of different sizes and preparations to be imaged such as biophysical
methods like FLIM and FCS; and ability to generate image data for
multidimensional analysis of biological events and processes.The QuVi SPIM also features a compact, vibration-free and robust design,
resolution down to 340 nm in 3D, and a browser-based user interface.For more information, please visit the Scitech website www.scitech.com.au or call (03) 9480 4999.
Contact Scitech
Scitech (Head office)
Update these details
Unit 4, 72- 74 Chifley Drive
Preston
VIC 3072
Tel: 03 9480 4999
Fax: 03 9416 9959
