Product Showcase
Control and Measurement - High Performance Potentiostats and Galvanostats by Scientific Solutions
Product/Service Name
"Reference" Series Potentiostat/Galvanostat/ZRA
High Performance Potentiostats!With the Reference 600, you can measure the impedance at 1 MHz with less than 2% error! The Reference 600 has a Rise Time of less than 250 nanoseconds! You can acquire data in DC experiments at 300 kHz, or one data point every 3.3 microseconds! That translates to a scan rate in cyclic voltammetry of 1200 volts/second with a Step Height of 4 mV.
Despite these impressive specifications, the Reference 600 and 3000 are surprisingly compact. For use at home in laboratory or field applications
The Reference 600 PotentiostatsThe Reference 600 has 11 current ranges from 600 mA to 60 pA. That's 11 different current ranges in the I/E Converter. By increasing the gain, the instrument can extend to 600 fA full-scale. This translates to a 20aAmp resolution.
The Reference 600 employs a very clever scheme to reduce the noise levels in the measurement of the current, voltage, and auxiliary input signal. It has the lowest noise specifications of any research Potentiostat at <10µV rms. This is 5 times better than others' published noise levels and the typical performance of the instruments is even better!
The Reference 3000 PotentiostatsThe Reference 3000 is the 600's new big brother. It has essentially the same capabilities, but a higher current capability makes the Reference 3000 very useful in Energy Storage and Conversion (ESC) applications including stacks of batteries, fuel cells, or super-capacitors. The Reference 3000 can operate stacks with voltages as high as 32 volts. An auxiliary electrometer option provides an array of eight high-voltage differential voltage inputs.
For more information please contact Scientific Solutions, enquire now or vist the website