SANDVIK Coromant’s CoroMill 210 milling cutter offers face milling and plunge milling. This is made possible by the design of the cutter body, the insert seats, and the inserts themselves.
High feed face milling is the most productive roughing method. Extremely high chip volumes can be removed at feed rates far above those possible with conventional face milling. In favorable conditions up to 4mm/tooth can be used and metal removal rates of up to 1400cm3/min can be achieved.
Plunge milling is the fastest way to mill away large volumes of metal in the axial direction. Plunge milling can be the only possible solution for long tool overhangs and unstable conditions. It is a highly productive method for internal milling of deep cavities and milling externally along deep shoulders.
CoroMill 210 is available in 25mm-82mm diameters and with 9mm and 14mm inserts with four cutting edges.