Home > Tension and compression tester

Tension and compression tester

Supplier News
article image The MultiTest X5.

MECMESIN, represented by SI Instruments , has introduce the MultiTest X5 test stand.

The MultiTest X5 is a single column 5kN tension and compression tester, fitted with a load and deflection measurement system and is operated through a keypad.

The MultiTest X5 is designed for ongoing production control testing on the shop floor. Simple and advanced test routines can be pre-programmed in the so that the operator only has to call up the test routine and start the measurement.

Data output via the RS232 connector can also be programmed to send the required results in the format and sequence ready to be interfaced to the factory's data management system.

The Mecmesin MultiTest X5 is standard supplied with a 5kN load cell; lower capacity load cells are available for highly accurate measurement at the lower end of the force scale.

Newsletter sign-up

The latest products and news delivered to your inbox